Question 2: How to tie your shoelaces so that they are not easy to loosen? The following kinds of shoelaces are not easy to loosen:
I. Cross knot
1, one end is knotted and the other end is punched in turn;
2. Jump into a hole;
3. fasten it in the same way;
4. After repeating, insert the remaining shoelaces into the inside and tie them;
5, purple shoelaces are also punched in order;
6. Wear it from below and then from above;
7. Choose a harmonious shoelace according to the color of the shoes;
8. Extra shoelaces are knotted inside.
Second, trapezoidal knot
1, after adjusting the length of both ends of the shoelace, pull the shoelace from the inside out;
2. Pull out the shoelace and thread it into the second hole from outside to inside;
3. The shoelace on the left goes out from under the shoelace between the two holes on the right, and it is similar on the right;
4. Repeat the operation;
5. Pay attention to the direction of crossing shoelaces at both ends;
6. Extra shoelaces are stuffed into shoes and knotted;
7. Finished trapezoidal knot.
Third, kink
1, two shoelaces are tied inside and released;
2. Two shoelaces cross through the second hole;
3. At this time, in order to center the intersection as much as possible, tighten the shoelaces;
4. The appearance of distortion is produced in the process of intersection pair;
5. An enlarged view of the kink;
6. Leave the last hole;
7. Finally, it is treated with X Ming Kai, which is more convenient to put on and take off;
8. The remaining shoelaces are tied together in the shoes.
Fourth, double X junction.
1, starting from the second hole and passing through the shoelace from outside to inside;
2. First use the X-knot method to make white shoelaces;
3, white X knot;
4. Knot the end inward;
5. As shown in the figure, the blue shoelace passes through the first hole, making an X knot and passing through the intersection of the white shoelace;
6. Tie the end of the blue shoelace;
7. The remaining lines are relatively long and can be made into a circle;
8. Run a few laps and cross the ring.
Five, double straight knot
1, leave a certain length of yellow shoelaces, then go out from the left and go in from the right;
2. Tie your shoelaces in the direction of the dotted line;
3. Adjust the shoelaces to keep them straight and don't roll them up;
4, the excess part is stuffed into the shoe;
5. Similarly, after leaving a white shoelace on the inside, tie a yellow shoelace on the inside;
6. Tie your shoelaces in the direction of the dotted line;
7. Adjust the white shoelace so that it is above the yellow shoelace;
8. The extra part is tied with the yellow shoelace on the inside of the shoe.
Six, diagonal knot
1. Tie a single knot inside after passing through the first hole, and the other end passes through the third hole on the left from inside to outside;
2. The shoelace passes through the second hole on the right;
3. Complete the diagonal knot with blue shoelaces;
4. Tie a diagonal knot with a white shoelace in the opposite direction;
5, the method is the same as the blue shoelaces;
6. The blue and white shoelaces finally came out of the hole in the tongue;
7. From the way the tongue wears;
8. It looks better if you tie it loosely.
Seven, internal X junction
1. After the two ends are consistent, the two ends respectively pass through the second hole;
2. Pass through the (1) hole, enter the (2) hole and then pass through the (3) hole;
3. Repeat step (1) (2) and (3) (as shown in the figure);
4. The length of things needs to be 90-95CM, and finally the length as shown in the figure is left;
5. tie a knot on the inside;
6. finished product style.
Question 3: How to tie the shoelaces loosely to look better? 1. After adjusting the length of both ends of the shoelace, pull out the shoelace from the inside out; 2. Pull out the shoelace and thread it into the second hole from outside to inside; 3. The shoelace on the left goes out from under the shoelace between the two holes on the right, and it is similar on the right; 4. Repeat the operation; 5. Pay attention to the direction of crossing shoelaces at both ends; 6. Extra shoelaces are stuffed into shoes and knotted; 7. Finished trapezoidal knot.
Question 4: How to tie your shoelaces so as not to loosen them easily? You can tie two knots and it won't come loose.
Question 5: Excuse me, "Friends who wear cloth shoes, if you don't tie your shoelaces and put them in your shoes, how can you make them loose and not fall out of your shoes?" Tie the shoelaces (loosely) on your ankles first, then take off your shoes, put them in, and then wear them (only for the first time)
I think this kind is good, not too loose.
Question 6: How to tie your shoelaces without falling off or coming loose? It's amazing. It's amazing. Hello, everyone. I'm Coco. Today, I will introduce you to a magical shoelace-Hengli Button Shoelace. Is a national patent product, specifically for you to solve the trouble of loose shoelaces. Whether it is sports, leisure, travel or mountain climbing, shoelaces will fall off, which is an inevitable problem of conventional shoelaces. Now, Hengli button shoelaces have completely solved this problem for us. There are many buttonholes on the buckle belt, which cross each other. You see, the shoelaces will never fall off again. Next, I'll introduce you to three basic ways to tie your buttons and shoelaces. The first method is casual knotting: when knotting, first put one end into the seam at the other end, then put it on the other end, and then pull it. When you take off your shoes, just loosen them and then fasten them. Extra shoelaces can be worn at any two seams of the vamp, and a beautiful flying swallow style will do. Second, military law: first put one end into the seam at the other end, and then put it at the other end. After tightening, the shoelaces will never be loosened, and the extra shoelaces can be stuffed into the shoes. Third, the "9" method: First, put one end of the shoelace into the first hole on the left side of the shoe, then fold it back through the shoelace hole near the first hole, and then put it on and fix it. Then, the other end of the shoelace passes through each hole in turn until it passes through the last hole, and then the remaining shoelace is folded back through the shoelace hole closest to the shoe hole, thus completing a 9-shaped tying method, and girls can also make a bow pattern. Mom, I can wear my own shoes and belt! With button shoelaces, you don't have to worry about loose shoelaces anymore! Button shoelaces are really useful when climbing mountains! Isn't it amazing? Not only that, you can also weave various decorations according to your different ideas and creativity. As long as it is something you want that you can't knit, it is simply an educational toy that opens your mind. Always buckle your shoelaces, tie them in an instant and never loosen them.
Question 7: Shoelaces are always loose. What should I do? Fasten a dead button
Adopt it
Question 8: Should the shoelaces be fastened or loosened? It's thoughtful of you to ask such a question. As for shoelaces, it's not good to be too tight or too loose. It should be moderate. Finally, it is best not to loosen them easily or tighten your feet. Maintenance of shoes: Keep the shoes in the water as little as possible, hold them up with paper balls, and then put them in a shoe box, and polish them with shoe polish.
Question 9: You can wear shoes without shoelaces if your shoelaces are not loose for 50 minutes, or go home now and let your parents teach you how to tie your shoelaces.