What are the principles and characteristics of Jin Lei three-cylinder dryer?

Three-drum dryer is a combination of three concentric cylinders with different diameters embedded with each other according to a certain mathematical relationship and structural form by introducing advanced technology from Germany today. Due to the special structure of the three-cylinder dryer, the length of the cylinder is one-third of that of the single-cylinder dryer, and the basic area is about 65% less than that of the single-cylinder dryer, and the basic investment is also reduced accordingly. The dryer adopts friction transmission between the idler and the tire belt, which has low transmission power and reduces the noise when the equipment works. The sealing system adopts micro-contact technology, which has better sealing effect and reduces dust pollution. The three-drum dryer can adapt to various fuels such as coal, oil and gas, and can dry a variety of materials such as lumps, granules and powders. In line with the national policy of creating an environment-friendly and resource-saving society, it is an environmentally friendly and energy-saving product that replaces traditional drying equipment.

Features:

1, high technical content, self-insulation of the cylinder, high thermal efficiency of 80% (thermal efficiency of single-cylinder dryer is only 35%), saving coal by 68% compared with single-cylinder drying, and increasing production by 100%.

2. It is 60% shorter than the single-cylinder dryer, which is beneficial to process layout. Reduce the building area of the factory building and save about 40% of the project investment. Covers an area of about 20m2.

3. Heat-resistant and wear-resistant alloy steel plate is adopted, which is four times more wear-resistant than ordinary steel plate. Long service life and convenient maintenance.

4. The thermal efficiency is high, the outer cylinder temperature is lower than 60℃ (the outer cylinder temperature of single cylinder dryer is as high as 150℃), the outlet temperature is low, and the discharge temperature is lower than 60℃.

5, the outlet temperature is low, which is beneficial to the long life of dust removal equipment, and can be directly matched with the air box pulse bag filter.

6. Civil construction investment is reduced by about 50%, and power consumption is reduced by 60%.

7. Don't need the big and small gears to rotate, and use the idler to rotate.

8. The hot blast stove can be used together with boiling furnace, coal injection furnace and hand-fired furnace, and can also be used for oil and gas furnaces, which can dry for 20? Blocky, granular and powdery materials below millimeter.

9. Output per hour: 5- 10? 10- 15? 15-20? 20-25? 25-30? 30-40? 40-50? 50-60? 60-70? 70-80