To turn on the off-seat automatic flushing function of the smart toilet, you can usually follow the following steps: turn on the power supply and water source to ensure that the smart toilet is properly turned on, the water control valve is opened, the water pipe is connected, and the water pressure is normal.
Human body sensing settings: Most smart toilets use infrared or other sensors to detect whether the user is seated. Usually, it is not necessary to check whether the human body sensing function of the toilet is turned on, but some models may need to confirm whether this function is effective in the system settings.
Remote control operation: set with the remote control that comes with the toilet. According to the instructions of Wrigley Smart Toilet and other brands, press and hold the flush button on the remote control for 5 seconds until the automatic flush indicator lights up, indicating that the automatic flush function has been successfully turned on.
Panel operation: Look for buttons related to automatic flushing on the operation panel of the toilet, such as "Auto Run" and "Set Flushing", and press these buttons to start or close the flushing function far away from the toilet.
Personalized setting: Some advanced smart toilets can also adjust the parameters such as flushing time, flushing times and sensing sensitivity. Please refer to the instruction manual for details.
Confirm that the function is effective: after setting, test whether the function works normally: get up and leave after sitting in the toilet. If the toilet automatically starts flushing after you leave for a certain time (such as a few seconds), it means that the function has been successfully turned on.