In this cold winter, if we want to take a bath, solar water heaters can solve this problem for us. In the past, if we used solar energy, it would be impossible to take a hot bath on a cloudy day. , then the current water tank-less wall-mounted solar energy will bring us a warm and comfortable bath no matter what time it is. Now I will give you a detailed introduction to the details of the water-tank wall-mounted solar energy.
1. Water tank-less wall-mounted solar energy - what is water tank-less wall-mounted solar energy?
Water tank-less wall-mounted solar energy refers to the use of high-performance PCM phase change energy storage materials, and through concentric casing The parallel structure places the energy storage material into the solar collector tube to realize on-site storage after the solar collector tube collects heat. The "PCM phase change energy storage material" is used to replace the solar hot water system that uses "water" as the heat storage medium to achieve Tankless and modular solar water heater.
2. Water tank-less wall-mounted solar energy - Advantages of water tank-less wall-mounted solar energy
1. Simple operation. Such as temperature, water level detection, water inlet and outlet control, water flow, water pressure, heating, timing, overcooling, overheating, leakage protection, etc., all realize computer self-test and self-control. Users only need to turn on and off the hot water faucet, making it a truly unattended product. Its convenience, energy saving, safety and other performances are even better than those of existing conventional energy water heaters.
2. Easy to assemble. In order to adapt to the convenience of building matching, each glass tube is processed into a heat collecting module of uniform size. The electrical and water connections between modules are plugged in. The amount of hot water can be adjusted according to user needs, and the heat collecting modules can be made like building components. It can be assembled into a collector of tens to hundreds of liters at will, and it is very convenient to install and maintain.
3. Absolutely safe. All use 12v low voltage control, and regardless of electric heating or not, as soon as the hot water faucet is opened, the power will be automatically cut off, which is foolproof.
4. Prevent freezing damage. Even in the extreme weather of -40°C without sunshine for several days, the collector will not freeze. Because when the heat storage temperature of the collector is lower than a certain temperature, the electric heating will automatically start to supplement the heat and stop after reaching the standard. Outdoor water pipelines are only a few dozen centimeters long, and it is quite easy to insulate them.
3. Water tank-less wall-mounted solar energy - How to use water tank-less wall-mounted solar energy
1. Insert the leakage plug of the controller into the power socket and press the reset button on the leakage plug. When you start checking the surface, you will hear sounds inside the surface, which is normal. The surface shows the temperature inside the pipe measured at that time, and the water level is empty. When the surface is stopped, the water supply, water supply and heating lamp will not light up.
2. Fill the water: Press the water supply button, and the green light on the far left turns on to start filling the water. First flush the inside of the wall-mounted solar water heater host, wait for about 2 minutes for water to flow out of the hot water outlet on the upper part of the host, and then Connect this interface to the hot water inlet of the control box, and install a leakage gasket until the water level appears on the surface, water spurts out of the pressure relief port, and there is no air interruption. If there is still air in the pressure relief port, continue to press the water button until There is no air interruption in the water flow from the pressure relief port. Water flows out when the hot water faucet is opened (water flow from the pressure relief port is stopped). The two green and red lights on the far right are on at the same time to prove that the hot water is normal; (Note: If the hot water faucet is opened and the water flow is intermittent, It means there is still air in the main unit and water needs to be filled again).
3. Electric heating: Press the water supply button first, and then the electric heating button to heat. If the water supply lamp subsides and the heating lamp lights up, it is normal (if it trips, check whether the wires are connected incorrectly or the heat is collected) Check whether the appliance is leaking); if you turn on the hot water faucet, the heating lamp will turn off, which is normal.
The above is the detailed explanation of tankless wall-mounted solar energy provided by the editor.