Our bureau organized an expert group to review and accept the project, and considered that:
1. This product uses the difference between atmospheric pressure and vacuum pressure of the unit to improve the ultimate vacuum degree of the product and reduce noise and energy consumption. This product has been authorized by the national utility model patent, reaching the domestic leading level.
2. The products have been tested by XX Mechanical and Electrical Products Quality Inspection Institute, and the technical indicators meet the requirements of GB/ D 32 16 and the provincial new product trial-production plan. The product has good economic and social benefits after being used by users.
3. The technology of the project is mature and the detection means are complete. The company has passed the ISO900 1 quality management system certification, and has formed a large-scale production capacity.
The acceptance team believes that the project has completed the provincial new product trial production plan and agreed to pass the acceptance.
Question 2: What are the acceptance criteria for scientific and technological projects? Hello! The acceptance criteria of science and technology projects in different provinces and cities are different. Different science and technology projects are different. I suggest you go to the website of the Science and Technology Department to download relevant information. (Apply for science and technology projects and choose Bajie Science and Technology Services)
Take Changsha as an example:
The main contents of project acceptance include: 1, the contents stipulated in the project contract and the completion of technical, economic and social development indicators; 2, the total amount of funds determined by the project contract, the municipal administrative department of science and technology funding, matching funds and self-raised funds in place, the actual expenditure of project funds and the use of rationality and standardization; 3. Independent intellectual property rights obtained by the project; 4. Organization and management of project implementation.
Article 6 The project acceptance methods are divided into meeting (on-site) acceptance and completion acceptance. Meeting (on-site) acceptance means that the project undertaker applies after the completion of the project, and the members of the acceptance team listen to the procedures such as project implementation introduction and inquiry in the form of meeting, and conduct on-site inspection and discussion when necessary to form acceptance opinions. Closing acceptance refers to the self-inspection conducted by the project undertaker according to the contract requirements under the organization of the recommending unit after the project is completed, and a closing report is formed. Seventh major projects and key projects should be accepted in the form of meeting (site), and major projects must be accepted on site; The acceptance of general projects adopts the method of final acceptance.
Eighth reward, investment and financing projects and post subsidy projects, as well as the results directly produced by the identification of scientific and technological achievements at or above the provincial level and other unnecessary acceptance projects will no longer be organized for acceptance.
Chapter III Organization of Project Acceptance
Article 9 The administrative department of science and technology of Changsha City entrusts relevant science and technology intermediaries to organize the acceptance and performance evaluation of municipal science and technology projects. Under the centralized guidance of the comprehensive planning office of the municipal administrative department of science and technology, the supervision office participated in the whole process of supervision. 1. The acceptance of major special and key projects (including mid-term evaluation) is organized by relevant science and technology intermediaries and conducted by means of meeting (on-site) acceptance. 2, the acceptance of general projects, in addition to universities and research institutes projects by the recommended qualifications of universities and research institutes science and technology departments according to the final acceptance method, according to the other.
According to the principle of territoriality, the administrative department of science and technology of the district or county (city) or the administrative department of science and technology of the park shall organize the acceptance by itself according to the acceptance method. After the acceptance, the recommending unit will write and submit a self-inspection report, which will be submitted to the project director's office, comprehensive planning office and entrusted science and technology intermediary agency of Changsha science and technology administrative department for the record, and a certificate of acceptance will be issued. When necessary, the entrusted science and technology intermediary institutions may conduct spot checks and audits.
Tenth in addition to the general plan of the project, the project acceptance shall set up an acceptance expert group. The acceptance expert group consists of not less than five experts in related fields (technical and economic fields) and scientific and technological management personnel, among which the experts in technical fields are not less than two thirds of the total number of experts, and the experts in related fields are randomly selected from the talent pool of the municipal administrative department of science and technology.
Eleventh project acceptance experts shall be responsible for the confidentiality of the technical content of the acceptance project, and the technical data accepted for review shall not be used or made public without authorization. If the project undertaking unit has confidentiality requirements for the research content, it may apply to the organization and acceptance department. After examination, if it is really necessary, the organization and acceptance department shall sign a confidentiality agreement with the members of the acceptance expert group to stipulate the confidentiality period and content.
Twelfth project acceptance to implement the avoidance system. Project completion personnel and collaborators cannot participate in the acceptance work as members of the acceptance team. Chapter IV Application for Project Acceptance
Thirteenth project undertakers must submit an application for acceptance or completion acceptance within three months after the completion date stipulated in the contract.
Article 14 To apply for acceptance of major special and key projects, the following materials shall be submitted: 1, application for project acceptance; 2. Project planning documents and project contracts; 3, project implementation technical report and work summary; It should include the technical research process, relevant experiments and tests, achievements, patents and related product (or prototype) data, the use of funds, economic and social benefits, user reports, etc. 4. Final statement of project funds; 5. Contents and suggestions for further organizing research or industrialization. General project self-inspection report should include the summary of project implementation, social and economic benefits of technological achievements, final accounts of funds, especially the use of funding.
Fifteenth major special and key projects acceptance application to the municipal administrative department of science and technology project director's office to declare, the project director's office according to the project contract to review the acceptance data. Those that meet the acceptance conditions shall be submitted to Changsha after signing the opinions ... >>
Question 3: I have a sample report on the acceptance of scientific and technological projects. Please pay for it.
Question 4: Ask about the acceptance process of scientific research projects, O(∩_∩)O Thank you. The acceptance process is as follows:
1, submit the project research report.
The project undertaking (implementation) unit shall submit the first draft of the project research report and the electronic version of its internal acceptance opinions to the competent department of the project within one month after the completion of the project. If the contract or project task book fails to submit the acceptance application in time or submit a written extension report within the prescribed time limit, it shall be handled according to the breach clause agreed in the contract or project task book.
2. Paper materials to be submitted for project acceptance.
(1) project contract or task book (1 copy);
(2) Project research summary report (8 copies);
(3) Financial final accounts report or financial audit report (1 copy);
(4) Important data, software or program modules, technical data and maps related to the project results (1 copy);
(5) Discussion draft of project acceptance opinions;
(6) Special information requirements
① All kinds of maps submitted shall conform to the relevant national standards, and the cited maps shall indicate the time and source, otherwise the maps used shall not be recognized. (2) Instruments, equipment and software research and development projects shall submit corresponding technical inspection and software test reports. The project undertaker shall apply to the competent department of the project in advance according to the progress of the project, and the competent department of the project shall organize or authorize qualified authoritative institutions and experts to carry out inspection and testing. The inspection and testing process shall strictly implement the enterprise standards in relevant technical fields or the relevant industry standards and national standards formulated by China Petrochemical.
3, acceptance meeting and acceptance conclusion
(1) The acceptance meeting is organized by the competent department of the project and presided over by the acceptance team leader. The acceptance leader shall be the leader or deputy head of the professional group of the Science and Technology Commission.
(2) On behalf of the project team, the reporter reports the completion of the project according to the requirements of the acceptance content, and answers questions from the expert group. On the basis of report and defense, members of the acceptance expert group will grade the acceptance items and discuss and form acceptance opinions.
(3) The acceptance conclusion can be divided into "agreeing to pass the acceptance" and "disagreeing to pass the acceptance".
After examination, the project that has completed the tasks specified in the contract or project task book, technical and economic indicators, reasonable use of funds and standardized management will be given "consent to pass the acceptance". At the same time, the results of the project are reviewed, and the evaluation conclusions are made mainly according to the scientific value, technological innovation level and popularization and application prospect of the results, which are divided into three grades: excellent, good and qualified, and the evaluation opinions are formed.
In any of the following circumstances, it shall not be accepted:
(1) Failing to complete the tasks and indicators specified in the contract or project specification;
② The acceptance data provided is untrue;
(3) the use of funds is fraudulent or used for other purposes.
If the project acceptance is unqualified, the project undertaking unit shall rectify the existing problems and apply for project acceptance or project termination again within 3 months. The projects applied for and approved for termination at this stage are "abnormal termination" projects, which shall be implemented in accordance with relevant penalties and contract provisions.
Question 5: What are the acceptance forms of scientific research projects? The appraisal institution shall express its opinions. Where the topic is generally organized by where. The appraisal opinions shall be issued by the unit itself.
Question 6: The difference between the completion and acceptance of scientific and technological projects. The conclusion mainly emphasizes the project team, that is, according to the contract requirements, the project team has completed all the research work and can apply for the conclusion. Acceptance emphasizes the competent unit of the project and is the competent unit that organizes the acceptance. There is no qualitative difference between the two, one emphasizes the project team and the other emphasizes the project supervisor.
Question 7: When applying for acceptance appraisal of scientific and technological projects, it is necessary to submit work summary and technical summary. What is the main difference between these two summaries? The main difference is that the work summary focuses on the whole work process and results of this achievement from project establishment to completion of planned tasks. Technical summary, also known as research/preparation report, mainly reflects the main academic and technical contents of the project and is the main basis for evaluating the level of achievements.
(a) the summary report mainly expounds the preliminary situation of the project research and the process of organizing the implementation of the overall plan, including:
1, project status (project source);
2. Basis, purpose and significance of the project;
3. Start time;
4. Research process.
The overall plan and implementation process, the investment and scale of the test, the output and quality of the trial-produced products.
5. Project completion
Whether it meets the requirements of the original plan or task, what technical problems have been solved, the successful experience and failure lessons in the research process, and the future development direction.
(two) the technical summary report should reflect the whole picture of the technical research work of this achievement. Specifically, it generally includes:
1, the basis of topic selection and the guiding ideology of design: it mainly shows that the topic selection of this study is targeted; The technical route adopted; The trends of similar research at home and abroad; Reasons for opening the topic; Conditions for testing; The innovation degree of the main content; In the research, the overall design, the implementation scheme and measures of key technologies, the specifications, indicators and technical and economic effects achieved by the main technical contents.
2. Test materials and methods.
3. Test process and results: The test and results of each stage are described by combining quantitative and qualitative methods. In particular, the new theoretical discoveries in the experimental research process, as well as the invention and innovation, improvement and improvement, development and perfection of applied technology are summarized and explained. Attach necessary forms, etc.
4. Technology Key and Innovation: This is the core part of the technical report. It is an important content to reflect the technical level of the results (the technical confidential content should be explained to the organization appraisal unit and appraisal committee in advance, and kept confidential according to the regulations). By comparing the main achievements of similar research at home and abroad, the innovation degree and technical level of this research can be explained.
5, technical focus and scope of application. According to the characteristics of the important technical content of this study, the suitable application scope is determined, and the matters needing attention and conditions for application in production or scientific research are expounded.
6. Popularization and application and its shortcomings. The application and effect of important narrative achievements in practice, as well as the problems and reasons found in the application, and suggestions for improvement in the future. The research report is the main basis for evaluating the achievement level.
I am also engaged in project declaration in enterprises, and we can exchange and learn from each other.
Question 8: How to write the opinions of the units applying for acceptance of the National Science and Technology Support Plan Acceptance Application Form?
Question 9: Is the acceptance certificate of science and technology project an achievement? A "certificate" is not an achievement in itself.
When it is determined that a project produces scientific and technological achievements, a certificate of appraisal or evaluation of scientific and technological achievements will generally be formed.