How long does it take to wash the watch oil?

So how long does it take for the watch to be washed with oil? It is determined by the following factors: 1, the sealing problem of the watch. As long as the case is tightly sealed, there will be no foreign matter such as gas, moisture, dust, fiber, etc., so that the watch oil is not easy to deteriorate and volatilize, the movement is not easy to rust, and there is not easy to have tiny impurities between gears and parts, and the movement is relatively "clean". 2. Wear degree of the watch (wear degree). If you always wear the same watch every day, the parts will be greatly worn under frequent use. On the other hand, if the watch is basically put on hold, the degree of wear and tear of the parts is small. I used to have a lot of watches, all of which have been kept for 15 years. Now I take it out for testing, and the performance index is still qualified. The swing is very high and the time is very accurate. 3. Quartz watch can prolong the oil washing cycle. The influence of "sludge" on watches with relatively large parts is less than that on watches with relatively small parts, while the oil washing cycle of thin or women's watches is relatively short, and some watches even need to be cleaned at least once every two years. 5. It is related to the material, technology and lubricating oil used in the watch parts. The material used in the watch movement includes some key parts, such as escape wheel and escape fork. It is best to use steel to polish the working face. Using special oil protection devices (such as eye protectors with diamonds and watch movements with many diamonds) and oil diffusion prevention treatment (such as stearic acid treatment) are definitely better than nothing. Swiss Morris watch oil should be the best watch oil. Earlier, the Swiss boss of ENICAR Watch Factory once said that my watch should not be washed for at least five years, because my watch uses Maurice NEW90 10 watch oil (packed in blue medicine), and the swing of the watch can be increased by 20 degrees on average. Coupled with their patented oil stop and oil diffusion prevention treatment technology, the oil washing cycle can be greatly extended. 6. Expensive watches need careful cleaning. You know, the watch is basically not broken, but repaired. Expensive watches need to be maintained (disassembled, tested and oiled) according to the standards of Swiss manufacturers. 7. Watches that have not been washed and maintained for a long time. Once the oil of such a watch is washed, it may be found that the parts have worn out. In short, the oil washing of watches is the same as that of human body. Once it is found to be getting worse, it is necessary to calculate the time from the last oil washing to the present. Considering whether the watch needs cleaning, a good watch maintenance is the key to ensure and extend the normal use time of your watch.