ceramic tile is a common building material when we decorate. We need to use ceramic tile when decorating the opposite side. Compared with the floor, it is more wear-resistant, so laying ceramic tile in the living room is a very correct choice. We all know a little about the traditional method of laying ceramic tile, but now there is a new method of laying ceramic tile abroad, that is, laying ceramic tile by laying hangers.
First of all, I'll tell you about the benefits of paving this ceramic tile hanger.
1. Save money.
Nowadays, the labor cost in many cities continues to soar. Traditional brick laying requires a lot of sand and cement, which requires a lot of handling fees. At the same time, the brick laying cost of the mud master is also a big expense, which makes many people unable to afford it.
the ceramic tile laying hanger does not need cement, and sand can save a lot of money.
2. Time-saving
Traditional paving requires mixing mortar, which wastes labor and takes a relatively long construction period.
Tile laying hanger saves the fatigue of mixing mortar and saves time.
3. Energy-saving
For friends who do floor heating at home, a large amount of cement wraps the ground heat pipe, which leads to great heat loss. The temperature conducted to the ground is already the residual temperature of the ground heat pipe. When the ground heat pipe or cable fails, it is a big project to dig up the tiles for maintenance. If it is not good, the whole ground may have to be resurfaced.
The ground heat pipe of the ceramic tile laying rack is under the ceramic tile, so the heat conduction speed is very fast and the loss is very small. Even in case of geothermal and cable failure, it can be disassembled and repaired at any time, without damaging the ceramic tile.
Second, of course, there are two problems when paving tiles with paving racks
1. Paving tiles with paving racks will form a certain overhead layer with the ground, and mosquitoes and cockroaches may breed; Suggestion: Before installing the hanger, lay a moisture-proof film on the ground and put an insect repellent on it.
2. If the ceramic tile is paved on the bathroom floor by laying a hanger, there may be water accumulation, which may lead to the problem of rusting the hanger. Suggestion: Wet functional areas such as toilets and open balconies should not be paved with this hanger.
third, what is the reason why there are few ways to lay tiles in China at present?
1. Due to the limitation of domestic construction technology, the hanging rack laying method has not been popularized;
2. The overhead form requires too high quality of tiles and hangers, so the cost of paving is high, which cannot be fully accepted and borne by most families in China.
Therefore, the popular way of laying hangers abroad is a good way of laying tiles, but it is still difficult to completely replace the traditional way of laying tiles (using cement mortar or tile glue).
Fourth, the method of laying tiles
1. Dry sticking method
In theory, dry laying method should be adopted for floor tiles, and floating sand and sundries should be removed after the grass-roots layer is watered and wetted. Wipe the bonding layer, use one-to-three dry cement mortar, lay it flat according to the horizontal line, put the brick on the mortar and tamp it with a rubber hammer, take off the ground brick and pour the mortar, and then put the ground brick firmly and tamp it flat.
2. The colorful sealant sticking method
does not use ordinary colored cement, but is mostly used for the ground or wall paved with gaps. The colorful caulking agent has the advantages of strong color fixation, pressure resistance, wear resistance, no alkalization, no shrinkage and no pulverization, thus solving the problem that the gap of ceramic tile falls off when it meets water, and the gap color of ceramic tile and ceramic tile are more beautiful after paving.
3. Cross positioning frame of edge banding
Through the use of edge banding, cross positioning frame and other auxiliary materials, the construction technology of internal angle and external angle is improved, and 45-degree trimming of tiles is not required, thus shortening working hours, reducing breakage and improving the precision of tile joint.
4, a variety of specifications combination method
According to a reasonable combination method, a variety of tiles with different sizes are combined and collaged, so that the wall or floor after paving is no longer monotonous and presents more changes.
5. Multi-color combination
Floor tiles with different colors are combined and assembled, and the visual effect after paving is more unique, which is very suitable for living rooms with large areas.
6, seam paving method
The antique floor tiles with a strong sense of history have uneven glaze, corroded corners, and the gaps between tiles are filled with colored cement, which makes the overall effect more heavy.
7. The difference between wet paving method
and dry paving method is that one to three dry cement mortar is replaced by ordinary water and cement mortar. The tile floor with wet paving method may produce hollows and bubbles, which will affect the service life of the floor tiles. However, because of its simple operation and low price, many families still use wet paving method to pave the floor.
8. Fragment paving method
Fragment paving method is to paste six 3 * 6 small bricks around a 6 * 6 big brick, including vertical paving, oblique paving, I-shaped paving, T-shaped paving and other ways. Its manifestation is similar to the combination method of various specifications, and it will have more varied visual effects.
That's the explanation about the advantages and disadvantages of tile laying hanger and tile laying methods. I hope it can help you to some extent. When we are laying tiles, in addition to the above traditional methods of laying tiles, we can also try to learn from this method of laying tiles with hangers abroad. After all, there are still many benefits.