How to buy a gas stove and how to distinguish its quality?

Look at the quality of the body: the appearance of the gas stove should be beautiful and generous, and there should be no collision around the body. The surface of some products made of cast iron, steel plate and other materials should be painted evenly, without foaming or falling off. The overall structure of the gas stove should be stable and reliable, the stove surface should be smooth and flat, without obvious warping, and all parts should be installed firmly and reliably without looseness. Pay attention to the thickness of the steel plate on the surface of the cooker: some steel plates are very thin and easily deformed and twisted. Choose safe and economical cookers: choosing cyclone fire and infrared cookers can save gas and have relatively high heating efficiency; In addition, it is also important to have flameout protection devices. With flameout protection device, when the flame is extinguished by wind or water, it can automatically cut off the gas to ensure safety. The best ignition method is pulse ignition cooker, which has high ignition rate. Identification of advantages and disadvantages of gas stoves: packaging and identification should be complete. The name, address and model of the factory should be marked on the package, and each cooker should have a certificate and instructions for use. There should be a nameplate on the side panel of the cooker, indicating the name, model, applicable gas and pressure, heat flow and production date, etc. Proper heat flow. The greater the heat flow value of domestic gas stoves, the stronger the heating capacity, which is usually called fierce fire. Ordinary consumers are willing to choose stoves with strong firepower. In fact, the size of heat flow should be adapted to cooking methods and stoves. The gas stove and sink must be bought before the cabinet is installed, otherwise the embedded size cannot be reserved when installing the cabinet. If the cabinet manufacturer is unwilling to help install the cooker and sink, it is necessary to install the cooker manufacturer, sink manufacturer and cabinet manufacturer at the same time.