Glass fiber reinforced plastic anti-glare board is a road anti-glare board produced by SMC molding compound, which has excellent anti-glare effect and excellent weather resistance. This product has the advantages of reasonable design structure, small wind resistance, no snow, simple installation, beautiful and economical appearance, little psychological impact on drivers, and greatly reduces the maintenance cost compared with traditional anti-glare facilities. Each performance index conforms to the traffic industry standard JT/T333- 1997 "Technical Conditions of Highway Anti-glare Facilities" and the traffic industry standard JTJ074-94 "Technical Specification for Design and Construction of Expressway Traffic Safety Equipment and Facilities", and it is an essential application product in modern highway construction.
Characteristics of glass fiber reinforced plastic anti-glare board;
1, containing special materials, effectively resisting ultraviolet rays.
2, organic pigments and inorganic pigments are mixed, which is not easy to fade and change color.
3. High-strength glass fiber reinforced plastic, with glass fiber inside, can resist the wind load of 6M/S and has good aging resistance.
4. The surface is provided with two reinforcing ribs, which are firm and durable.
5. The unique inverted "S" design can not only increase the strength and reduce the air pressure, but also block the light in the opposite direction to a limited extent.
6, salt and alkali corrosion resistance, sand wear resistance.
7, green design, effectively reduce driving line fatigue.
8. Working temperature range: -40℃-+70℃
Glass fiber reinforced plastic anti-glare board size:
850 * 200 * 4 mm, 800 * 180 * 4 mm, 900 * 220 * 4 mm, 1000 * 2 10 * 4 mm,100 *.
Physical properties of glass fiber reinforced plastic anti-glare board
1, physical properties of anti-glare board materials
The tensile strength is 70Mpa, and the bending strength is100 MPa;
Density: (1.7—1.8) ×10/m3.
Impact strength: 73.5 MPa
2. Technical parameters of anti-glare board
The plate height is 800mm, and the bearing height is1.3; Plate width180mm;
The plate spacing is 1000 mm,