Mo Shenxing, Legal Policy Research Center of Shanghai Energy Conservation and Emission Reduction Mechanism
People's Daily (14th edition, June 16, 28)
I. Multiple-choice questions
1. Energy Conservation Law of the People's Republic of China (hereinafter referred to as "Energy Conservation Law of the People's Republic of China") D
A. January 1, 1998
B. October 28, 27
C. January 1, 28
D. April 1, 28
2. The energy mentioned in the Energy Conservation Law refers to _ _ _ _ _ _. A
A. Coal, petroleum, natural gas and biomass energy
B. Solar energy, wind energy
C. Coal, hydropower and nuclear energy
D. Renewable energy and new energy
3. The Energy Conservation Law refers to strengthening energy management and adopting technically feasible, economically reasonable, environmental and new energy.
a. every link from production to use
b. every link from mining to consumption
c. every link from consumption to recovery
d. every link from production to consumption d
4. the state implements industrial policies that are conducive to energy conservation and environmental protection, and _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
a. Encourage the development of heavy chemical industry
b. Encourage the development of tertiary industry
c. Restrict the development of industries with high energy consumption and resources
d. Restrict the development of industries with high energy consumption and high pollution d
5. the State Council and the people's governments of provinces, autonomous regions and municipalities directly under the Central Government should strengthen energy conservation, rationally adjust industrial structure, enterprise structure, product structure and energy consumption structure.
a. implement energy-saving target responsibility system
b. implement energy-saving evaluation system
c. implement energy efficiency label management
d. reduce energy consumption per unit output value and energy consumption per unit product d
6. the state carries out energy-saving publicity and education, integrates energy-saving knowledge into the national education and training system, popularizes energy-saving scientific knowledge, enhances the energy-saving awareness of the whole people, and advocates _ _ _ _ _. C
a. clean
B. circular
C. economical
D. environmental protection
7. saving resources is our basic national policy. The state implements the energy development strategy of _ _ _ _ _ _ _ _ _ _.
A. Give priority to development, and make rational use of D.
B. Give priority to utilization, and strengthen development.
C. Give priority to development.
D. Give priority to economy with both economy and development.
8. Director the State Council _ _ _ _ _ _ _ _ _ _ _ _.
A. National Energy Administration
B. Ministry of Environmental Protection
C. Ministry of Industrial Information
D. Department in charge of energy-saving work 9. the State Council and local people's governments at or above the county level report energy-saving work to _ _ _ _ _ _ _ _ at the corresponding level every year.
A. People's Congress or its Standing Committee
B. People's Congress
C. Standing Committee
D. People's Congress and Standing Committee A
1. The state implements _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
a. energy-saving target responsibility system
b. energy-saving evaluation system
c. energy-saving management responsibility system
d. energy-saving target responsibility system and energy-saving evaluation system d
11. The state implements the system of _ _ _ _ _ _ _ _ _ _ _ _ _ _ for fixed assets investment projects. Projects that do not meet the mandatory energy-saving standards shall not be approved or approved by the authority responsible for project examination and approval according to law.
a. energy consumption review
b. energy consumption approval
C. energy-saving evaluation and review
D. energy consumption limit standard for unit products c
12. production units of products with high energy consumption in the production process shall implement _ _ _ _ _ _ _ _ _ _ _ _.
a. energy consumption limit standard per unit product
b. energy star standard
c. energy-saving evaluation system
d. energy efficiency label management system a
13. the state implements the elimination system for _ _ _ _ _ _ _ _ _ _ _ _.
a. backward energy-consuming products with high energy consumption
b. backward energy-consuming products, equipment and production technology with high energy consumption
c. backward energy-consuming equipment and production technology with high energy consumption
d. backward energy-consuming products and production technology with high energy consumption b
14. For production units that exceed the energy consumption limit standard of unit products, the department in charge of energy conservation shall order them according to the authority stipulated by the State Council. C
A. Shut down within a time limit
B. Eliminate within a time limit
C. Treat within a time limit
D. Rectify within a time limit
15. The state implements _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ for energy-using products such as household appliances.
a. energy efficiency label management
b. energy consumption limit standard per unit product
c. energy star certification
d. energy-saving product certification a
16. producers and importers should be responsible for the accuracy of their energy efficiency labels and related information. Prohibit _ _ _ _ _ _ _ _ _ _ _ _ products that should be labeled but not labeled with energy efficiency labels.
a. Production
B. Transportation
C. Sales
D. Use C
17. Producers and sellers of energy-using products can apply for energy-saving product certification to institutions engaged in energy-saving product certification approved by the State Council Certification and Accreditation Supervision and Administration Department according to _ _ _ _ _.
a. Mandatory principle
B. Voluntary principle
C. Restrictive principle
D. Application principle B
18. The statistical departments of people's governments at or above the county level shall, together with relevant departments at the same level, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
a. implement energy-saving target responsibility system and energy-saving assessment and evaluation system
b. implement energy consumption limit standard of unit products and energy efficiency label management
c. implement energy-saving assessment and review system
d. establish and improve energy statistics system and improve energy statistics index system d
19. the state encourages the development of energy-saving service institutions and supports _ _ _ _ _ _ _ _ _ _ _.
a. Energy-saving equipment dealers
b. Energy-saving equipment manufacturers
c. Energy-saving monitoring center
d. Energy-saving service institutions
2. Energy-using units should strengthen energy-saving management, formulate and implement energy-saving plans and energy-saving technical measures in accordance with the principle of _ _ _ _ _ _ _ _ _.
a. rational use of energy
B. economy
C. technical feasibility
D. management by objectives a
21. energy-using units should establish _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
a. target assessment system
b. energy-saving target responsibility system
c. energy-saving leading group
d. energy-saving office b
22. Energy-using units should establish _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ A
A. Statistics of energy consumption
B. Assessment of energy conservation
C. Energy supply
D. Detection of energy conservation
23. the State Council and the people's governments of provinces, autonomous regions and municipalities directly under the Central Government promote the optimal development, utilization and rational allocation of energy resources, and promote _ _ _ _ _ _ _ _ _ _ _ _ _ which is conducive to energy conservation. C
A. Mode of production
B. Mode of energy use
C. Industry structure
D. Product structure
24. Power grid enterprises should arrange clean, efficient and compliant _ _ _ _ _ _ _ _ _ _ _ and _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ C
A. Cogeneration unit
B. Coal gangue generating unit
C. Generating unit using residual heat and pressure
D. Cogeneration of heat and power and generating unit using residual heat and pressure
25. National standards and industrial standards for building energy conservation are formulated by the competent construction department of the State Council, and _ _ _ _ _ _ _ _ _ _. B
a. The departments in charge of energy conservation work
b. According to legal procedures
c. The National Standardization Committee
d. The General Administration of Quality Supervision, Inspection and Quarantine
26. The construction departments of local people's governments at or above the county level shall work out the building energy conservation plan within their respective administrative areas in conjunction with the departments in charge of energy conservation work at the same level. Building energy-saving planning should include _ _ _ _ _ _ _ _ _ _ _ energy-saving renovation plan.
a. existing buildings a
b. industrial buildings
c. civil buildings
d. public buildings
27. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ of construction projects shall comply with building energy efficiency standards. A
A. Construction, design, construction and supervision unit
B. Construction unit
C. Design unit
D. Construction and supervision unit
28. The public * * * buildings that use air conditioning for heating and cooling should be indoor _ _ _ _ _ _ _ _ _ _ _ _ _ _. C
a. It shall not be higher than 2℃ in winter and 26℃ in summer. C. It shall not be higher than 2℃ in winter and 26℃ in summer. D. Temperature control
29. New buildings or energy-saving renovation of existing buildings shall be installed in accordance with regulations. A
A. Heat metering device
B. Solar photovoltaic power generation device
C. Solar hot water device
D. Heat control device
3. the State Council is responsible for the supervision and management of energy conservation in transportation-related fields in the country according to their respective responsibilities. B
A. Institutions that manage the affairs of government agencies
B. Transportation authorities
C. Departments that manage energy conservation
D. Construction authorities
31. Local people's governments at or above the county level should give priority to the development of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Encourage the use of non-motorized vehicles to travel.
a. rail transit
b. bicycles
c. environmentally-friendly cars
d. public transportation d
32. public institutions should carry out _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ according to the regulations, and take measures to improve energy efficiency according to the energy audit results. A
a. energy audit
b. energy measurement
c. energy-saving inspection
d. energy-saving supervision
33. key energy-using units shall submit the _ _ _ _ _ _ _ _ _ _ _ _ _ of the previous year to the department in charge of energy-saving work every year, which mainly includes energy consumption and energy utilization. A
A. Energy utilization report
B. Energy conservation supervision report
C. Energy consumption report
D. Energy conservation benefit analysis report
34. Key energy users should set up _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
a. Energy audit post d
b. Contract energy management post
c. Energy accounting post
d. Energy management post
35. The department in charge of energy conservation in the State Council, together with the department in charge of science and technology in the State Council, issued _ _ _ _ _ _ _ _ _ _ _ _ to guide the research, development and popularization and application of energy-saving technologies. C
A. Technical specifications for energy conservation
B. Catalogue of energy-saving products
C. Outline of energy-saving technology policies
D. Technical standards for energy conservation
36. The department in charge of energy conservation in the State Council, together with the relevant departments in the State Council, formulated and published _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ B
A. Mandatory specification
B. Promotion catalogue
C. Purchase list
D. Certification list
37. The state shall implement tax incentives and other support policies for the production and use of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ D
A. Energy-saving technology and equipment
B. Energy-saving technology and products
C. Energy-saving technology and equipment
D. Energy-saving technology and products
38. The state encourages _ _ _ _ _ _ _ _ _ _ _ _ D
A. Low-priced energy-saving products
B. Mature energy-saving technologies
C. Practical energy-saving equipment
D. Advanced energy-saving technologies and equipment
39. The government procurement supervision and administration department shall, jointly with relevant departments, formulate the list of government procurement of energy-saving products and equipment, which shall be given priority in obtaining energy-saving products _ _ _ _ _ _ _ _ _ _. C
A. Patent certificate
B. Quality certification
C. Certification certificate
D. Environmental protection certification
4. The state guides financial institutions to increase credit support for energy-saving projects and provide _ _ _ _ _ _ _ _ _ _ _ _ for qualified energy-saving technology research and development, energy-saving product production and energy-saving technology transformation projects. C
A