according to different production methods, carbon fiber arrows can be basically divided into two types. One is the bonded arrow shaft with carbon fibers arranged in parallel, and the other is the wound carbon fiber arrow shaft. The manufacturing method of the former is simple, that is, carbon fibers are arranged along the direction of the arrow shaft and then bonded together, with few steps, and the curvature and straightness of the arrow shaft are easy to control. This kind of arrow shaft is of medium level, its price is not expensive, and its performance is passable, but it has a big disadvantage and is easy to burst. Because carbon fibers are arranged vertically, the transverse direction can only be supported by the strength of glue, but the strength of glue is much lower than that of carbon fibers, so it may burst when used. The production method of winding carbon fiber arrow shaft is relatively novel. After winding carbon fiber longitudinally, several layers of carbon fiber are wound horizontally to increase strength. Its working procedure is complicated with the distribution of glue, and the curvature and straightness of the arrow shaft are difficult to control. Moreover, it does not mean that the more carbon fibers are added, the better. With more materials, the weight will increase and the wind resistance will become worse.
carbon fiber can also be combined with other materials to make arrows, such as carbon-aluminum arrows. It uses aluminum metal to improve the strength, straightness and weight of carbon fiber. The cost of carbon-aluminum arrow is not low, but its performance is also good, and it also has a place in the market. There are so many kinds of carbon fiber arrows, and there are more other types of bows and arrows. For the old skills, we should inherit and constantly improve and develop them to meet the requirements of the times.