Shandong Unicom Skyworth E900V2 1C boxes are painted into Armbiam to install pagodas and Docker.

When I was in the early years, I was amused to see all the great gods playing with the guest cloud, so I opened several sets myself. Most gamers have their own homes. However, there is a player cloud, which should be the first start. I brushed the net and found various remedies. As a result, except for one brush bag that can successfully drive the usb network card under the armbian system I bought, the rest can't be brushed in, or there is no network, so I am tired. So I decided to give up tossing this disabled player cloud. Recently, I needed a device to run the docker project, so I thought of these little boxes. I happened to see my brother tossing this Skyworth E900V2 1C box in the forum. Because of the low price, I decided to start tossing.

First, introduce the hardware. This box was bought at the price of 55 yuan in the seafood market. Of course it's cheaper. There may be some differences in colors and versions. It should be noted that this box has a version of the HiSilicon chip. Don't buy it wrong. Generally speaking, the box of Shandong Unicom should be a Chen Jing chip. Better ask the seller. The box has exquisite appearance, two USB2.0 interfaces, an HDMI, a TF card slot, infrared, wifi and Bluetooth. All interfaces and functions are complete, and the appearance diagram is given.

This is a small box that is easy to disassemble, and even a disassembly opening is specially designed for you. Turn the box to the back. My version has three screws and the screw holes are directly exposed, and four screws are hidden under the foot pad. Unscrew the screw and there is a small buckle seam in the upper left corner. You can open the back cover with a screwdriver and see the circuit board inside. There is a heat sink on the back plate, which is in contact with the chip through the thermal pad. The cpu of this box is Chen Jing S905L, which is widely used in various boxes. There are countless brush bags suitable for this chip, and the gameplay is also varied. Next to the CPU are two Hynix * * 8G flash memory chips, and the memory bank of 1g is not shot, so the hardware is probably like this.

brush

This online brushing tutorial is not much, but the method is similar to other boxes. Here is a simple one. You need to prepare a 4g USB flash drive, a burning tool (USBWriter is recommended), a monitor, a keyboard and a brush package.

After setting the time zone and software source, return to the command line interface and enter ln-fs/run/resolvconf/resolv.conf/etc/resolv.conf to repair DNS. Enter vi /etc/network/interfaces to enter the editing interface, press I to enter the editing mode, enter two lines of fixed mac address "HW address ether your MAC address pre-up ifconfig eth0 HW ether" under "iface eth0 inet dhcp", press Esc to exit the editing mode, and then enter: wq to enter, save and exit. Finally, enter "apt update" to update the software. After the update, enter "armbian-config", select Software-Software -softy-docker, select docker with spaces, and then press enter to install docker.

If you install a pagoda, just go to official website Pagoda and copy the installation code. This is the operation of a fool. However, it should be noted that the above operations, whether updating software or installing docker, are time-consuming to install pagodas, and it is necessary to find a relatively free time to operate them.

With the competition of several broadband operators for users in recent years, there are many customized TV boxes on the market, most of which are recycled by users who quit the network. Large quantity, beautiful price and availability. There are few garbage guys, and many games have been developed. It is the first choice for picking up garbage.