The installation methods of wood veneer wall panels include air nail installation, dry hanging, and adhesive methods.
1. Air nail installation method.
The disadvantage of air nail installation is that it requires patch holes, and there is no way to standardize the installation. The quality of the decorative panels is closely related to the quality and working status of the workers and paint. It is necessary to ensure that there is an air compressor and power supply on site during the work, otherwise it will not be possible to carry out the work. After a long time after the installation is completed, it is easy to cause the nail hole repair layer to fall off or the decorative panel to become warped due to loose nails.
2. Dry hanging method.
This is to use metal pendants to hang the decorative panels on the wall or hang them on the steel frame. No glue is required. This is to set stress points on the main structure and use metal pendants to fix the panels. On top of the building, forming a wooden decorative wall.
3. Gluing method.
This is the most common method. It is usually used in the later stage of decoration. After the ground is completed, vertical adjustment measures must be taken when constructing the decorative panels on the base through glue and hanging code strips, and the construction must be slowed down. Speed, using this method can avoid later maintenance and rework, and can also avoid human destruction of all aspects during decoration.
Precautions for installing decorative wall panels:
1. Preparation work.
Before formal construction, relevant preparations must be made, and the technology of solid wall panels must be determined based on the structure of the wall itself. If it is a light steel keel gypsum board partition wall, the positions of the main and auxiliary keels must be marked for future foundation construction.
If it is a brick-concrete structure, the location must be strictly in accordance with the relevant requirements. In addition, the bottom keel must be fixed on the wall to better carry out later work. Moreover, before the construction of the wall structure, ceiling keels must be installed so that various circuits can be arranged in place within the wall.
2. Construction technology and key points.
In fact, the construction process of the entire wall wood veneer is relatively simple. The operation procedure only needs to strictly follow the elastic lines to make the wooden frame, install and fix the wooden frame on the plywood base, then install the wooden decorative board, and finally do the closing line processing. During this process, there are some key points in the construction. For example, the horizontal reference line must be determined for the spring line part so that the horizontal line can be fully utilized in future wall construction.
Finally, when making the wooden frame, you must first make the size of the wooden frame. During the process of fixing the wooden frame, the distance must be divided, otherwise it will not look very beautiful later.
3. Construction of wooden veneer panels.
During the construction process of wood veneer panels, it must be noted that no matter what kind of board is selected, the material must be selected first, then classified, and then used in order of color. When splicing solid wood panels, you must pay attention to the color difference between the two boards, which must be consistent. A loose groove must be made on the back of the board to prevent it from deforming.
The last is the acceptance quality standard. In fact, the most important thing is whether it meets the design requirements and whether the first-layer structure of the entire panel is installed reliably and firmly. The construction steps of wall wood veneer are roughly the above process. During actual operation, there will be more precautions. If there are no experienced workers, more or less problems will arise.
So, don’t blindly do it yourself, you must have professional staff to guide you.