1, diluted microbial inoculum: Gymboree fermentation bed strain 1kg/ 10, mixed with rice bran or corn flour and bran without water, and diluted evenly.
2. Preparation of padding: 20 square meters with an area of about 10 square meter (dry weight of about 2000kg). Sawdust must be dried and removed.
3, sowing strains: you can spread while spreading, or you can mix sawdust before spreading, remember not to add water! ! ! ! !
4. Spread to 50 cm: the required thickness is 50 cm. If the sawdust is not easy to take, it can be partly replaced by rice husk and straw, and the surface is still made of sawdust with a thickness of 20-30 cm.
5. Put the pig in the bed: After paving, you can put the pig in. Don't wait until the fermentation is good. When the surface is dry, you can spray a little water.
6. Scrape off or bury fresh feces below 20-30 cm, then cover with sawdust and flatten. After these operations are completed, you can start fermentation.
7. Daily maintenance: When manure overflows or penetrates into water, it must be pushed evenly, and the humidity on the surface of pigsty padding should be checked frequently. The water content of the fermentation layer that has started fermentation is generally controlled at about 50-60%. When there is too much water, you can open the vent and adjust the humidity through airflow. You can also drag some materials out to dry or add sawdust to reduce the humidity.
Effect: 1, environmental protection, no need to clear feces (decomposed by microorganisms) 2, water and labor saving (no need to rinse with water) 3, material saving (fermented protein can be reused) 4, less diseases, 5, good meat quality.