2022 Simplified Product Contract Model (I) Entrusting Party: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Processing party: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
On the basis of equality and voluntariness, the entrusting party and the processing party have entered into this agreement through friendly negotiation, so as to jointly abide by:
The entrusting party wishes to entrust the processing party to produce _ _ _ _ _ _ _ products according to the following conditions, and the relevant product orders will be sent to the processing party according to the provisions of this agreement.
The processor wants to process _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ data.
The entrusting party is the sole holder of the _ _ _ _ _ _ _ _ trademark.
First month order
1. The entrusting party must confirm the quantity of the processing order by fax _ _ _ _ _ days in advance. The contents of the order indicate the delivery time.
2. After receiving the order, the processor must confirm the order of the Provincial Social Security Bureau to the entrusting party by fax in writing.
3. Unless otherwise agreed by both parties, after the processing party accepts the order, the entrusting party cannot stop the order and the processing party must perform it.
4. The entrusting party must provide the processing party with the raw materials and packaging materials required for the order at the latest _ _ _ _ days before the processing party starts to work.
5. The date when the processor receives enough qualified materials and the date of shipment of finished products shall be no less than _ _ _ _ _ _ _. All losses caused by shutdown or delay due to insufficient quantity, unqualified quality of raw materials and packaging materials or failure to provide required materials in time shall be borne by the entrusting party.
Arrangement of raw materials and packaging materials
6. The representative designated by the entrusting party is solely responsible for the incoming quality inspection of raw materials and packaging materials.
processing charges
7. The processing fee including value-added tax is RMB _ _ _ _ _ _. From the date of signing this agreement to _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
8. The entrusting party will be responsible for product acceptance, transportation arrangement and payment of relevant freight and insurance fees.
9. The entrusting party is responsible for providing suitable raw materials and packaging materials, and transporting the required raw materials and packaging materials to the processing party free of charge. The entrusting party will arrange and handle the transportation of relevant materials by itself, and pay relevant freight and insurance fees.
The second technology and technology
The physical and chemical indexes of the finished product are provided by the entrusting party, and the processing party processes it in strict accordance with _ _ _ _ _ _ _ _ _. For initial processing, the entrusting party is responsible for online detection and quality control of physical and chemical indexes of finished products during processing. As long as the processor processes according to the above requirements and meets the quality index requirements in Annex I, the processor will not be responsible for the product quality. Other product quality responsibilities shall be borne by the entrusting party in the Provincial Social Security Bureau, unless:
A, the product contains other substances that are not in the formula.
B, the product contains foreign bodies such as glass, blue iron and sand.
C the product contains substances other than those contained in the formula, and substances produced by chemical and physical changes of substances contained in the formula.
Third payment terms
1. The first processing fee shall be remitted to the bank account of the processor by the entrusting party after the product production is completed.
2. After the payment is made by the entrusting party, the processing party must issue a VAT invoice to the entrusting party within working days.
Tort liability related to intellectual property rights, patents and trademarks
3. Without the written consent of the entrusting party, the processor or anyone may not use the trademark or trade name of the entrusting party or disclose the products for which the processor is the entrusting party.
Iv. responsibilities of both parties
When processing the above-mentioned products according to the formula and process requirements confirmed by the entrusting party, the processing party must complete the processing task index of the entrusting party on time with good quality and quantity, and the entrusting party is responsible for the procurement of the above-mentioned processed products from raw materials to all packaging. If the raw materials are not in place according to the production plan, the entrusting party will bear all the responsibilities.
Termination of the fifth agreement
1. Either party may terminate this agreement by giving a written notice to the other party _ _ _ _ days in advance.
2. If either party violates the above-mentioned treaty, the other party has the right to terminate this agreement by notifying the other party in writing _ _ _ days in advance according to the provisions of this agreement.
3. After the termination of the agreement, the entrusting party must take away all the remaining products, raw materials and packaging materials belonging to the entrusting party within _ _ _ _ working days after the termination of the agreement, otherwise, the processing party has the right to dispose of the relevant materials by itself.
Term of the sixth agreement
This agreement shall be valid for _ _ _ _ _ years from the date of signature and seal by both parties. With the consent of both parties, the term of the agreement can be extended through a supplementary agreement.
Customer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Handler: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Simplified version of model text of product processing contract in 2022 (II) Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Contact information: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Contact information: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party A entrusts Party B to process _ _ _ _ _ _ _ _ products. In order to safeguard the interests of both sides, the two sides reached an agreement. Both parties have reached the following agreement on subcontracting for mutual compliance.
I. Processing content
Party A entrusts Party B to process a series of products for it. The processing quantity, style (or development information), standards and quality requirements shall be provided by Party A, and the price shall be determined by both parties through consultation, which shall be specified in the order.
Two. Party A's responsibilities
1. Entrust Party B to process Party A's _ _ _ _ _ _ _ _ products every quarter as planned.
2. Provide Party B with the style (or development information), quantity, technical requirements and delivery time of the processed products.
3. Party A has the right to inspect and supervise Party B's production standards and product quality, put forward opinions and suggestions, and accept confirmed samples.
4. Party A shall accept the goods according to the samples and standards determined by both parties.
Three. Party B's responsibilities
1. Engage in processing activities in strict accordance with the contents and requirements entrusted by Party A. ..
2. The products shall be produced according to the standards of style, quantity, quality and production cycle determined by Party A, and shall not exceed the order quantity and variety in any form and for any reason.
3. Strictly manage _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ refers to any one of _ _ _ _ _ _ _ _
Four. Payment terms and place of delivery
After determining the style, quantity and standard of entrusted processing, Party A shall sign a notice of entrusted processing with Party B, and the balance shall be paid after the goods provided by Party B are accepted and put into storage by Party A.. The place of delivery is Party A's warehouse.
Verb (abbreviation of verb) acceptance criteria
Party A must accept the products within _ _ _ _ days from the date when Party B delivers the goods to the designated place. If there is any quality difference, Party A shall notify Party A in writing within _ _ _ _ _ days from the date of receiving the goods, otherwise it will be regarded as a breach of the objection and handling opinions put forward by Party A. ..
Liability for breach of contract of intransitive verbs
1. If Party B fails to deliver the goods within the time stipulated in this contract or the quantity and quality of the goods do not conform to the contract, Party B shall compensate Party A for the total price of the goods as liquidated damages. In addition, Party B shall bear the expenses arising therefrom, such as inspection, transportation, replenishment expenses, _ _ _ _ _, storage, loading and unloading and other direct losses.
2. If Party B produces or sells Party A's products, packaging, printed matter, etc. without authorization, once verified, Party B shall pay Party A RMB _ _ _ _ _ _ _ _.
3. If either party breaches the contract, the other party has the right to terminate the contract in addition to investigating the liability for breach of contract.
Seven. Term of validity of the contract
The term of this entrusted processing contract is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Eight. force majeure
During the term of this contract, if the contract cannot be continued due to force majeure, this contract will be terminated naturally, and both parties are not responsible for each other. If this contract cannot be continued due to the adjustment and change of national policies and government regulations, this contract will also be terminated naturally, and both parties will not hold each other accountable.
Nine. Dispute settlement method
Any dispute between Party A and Party B during the performance of this contract shall be settled through negotiation. If negotiation fails, the case shall be submitted to the _ _ _ _ _ _ _ _ Committee for arbitration according to law.
X. others
1. This contract was signed on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
2. If there are other matters not covered, Party A and Party B may sign a supplementary agreement separately, which has the same legal effect as this contract.
Party A (signature): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of Signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signing place: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B (signature): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of Signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signing place: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2022 Simplified Model Contract for Product Entrusting (III) Party A: _ _ _ _ _ _ (hereinafter referred to as Party A)
Party B: _ _ _ _ _ _ _ (hereinafter referred to as Party B)
Through friendly negotiation, Party A and Party B have reached the following agreement on Party A entrusting Party B with _ _ _ _ processing and other business:
1. Party A will entrust Party B to process _ _ _ _ _ _ _ _ according to the needs of production or trade, and the ownership of this _ _ _ _ _ _ _ _ belongs to Party A. ..
2. According to the requirements of Party A, Party B issues a disposal notice, and Party A confirms that Party B shall not misappropriate, allocate or dispose of all the goods of Party A without authorization.
3. Party B shall handle the specified _ _ _ _ matters according to the delivery time agreed in advance to ensure that Party A can deliver the goods on time. If Party A needs to pick up the goods in advance due to special circumstances, it shall negotiate with Party B _ _ _ _ _ hours in advance, and Party A will try its best to meet Party B's demand.
4. Party A agrees that Party B will charge the processing fee according to the content of "Annex I Processing Unit Price Table". In case of market changes, Party B needs to adjust the charging standard, and both parties can negotiate.
5. During the term of the agreement, if Party B fails to perform the agreement due to force majeure, it shall immediately notify the other party of the situation in the fastest way. According to the influence of force majeure factors on the performance of the agreement, both parties negotiate whether to terminate the agreement, or partially exempt the responsibility of performing the agreement, or postpone the performance of the agreement. However, if the agreement cannot be continued due to major force majeure factors such as war and earthquake, both parties shall be exempted from liability.
6. Matters not covered in this Agreement shall be settled by both parties through consultation.
7. This Agreement is signed in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8. This Agreement shall be valid from the date of signing to _ _ _ _ _ _ _ _.
Party A: _ _ _ _ _ _ _ Party B: _ _ _ _ _ _ _
Representative: _ _ _ _ _ _ Representative: _ _ _ _ _ _ _ _ _
Signing place: _ _ _ _ _ _ _ _ _ _ _
2022 Simplified Model Contract for Product Entrusting (IV) Party A: _ _ _ _ _ _ (hereinafter referred to as Party A)
Party B: _ _ _ _ _ _ _ (hereinafter referred to as Party B)
Based on the principle of equality, mutual benefit and win-win, Party A and Party B have reached the following agreement on the matter that Party A entrusts Party B to process _ _ _ _ _ _ _.
First, the mode of entrustment.
Party A provides the distiller's grains produced by brewing yellow wine in its subordinate production base, and Party B extracts the distiller's grains to burn alcohol.
The burnt distiller's grains shall be recovered by Party A for the production of yellow wine, and the remaining dry distiller's grains shall be treated by Party B. ..
Second, the production and processing
Party B has the relevant production site, obtained the production license from the government department, and has the production capacity of extracting distiller's grains and burning alcohol consistent with the production scale of Party A, that is, the ability to process the highest value distiller's grains every day.
In case of any major adjustment or expansion of production scale, Party A shall notify Party B six months in advance. If Party B loses or partially loses its production capacity due to non-subjective reasons, it shall also notify the other party in advance.
If the water content of distiller's grains provided by Party A deviates from the normal value, Party B shall not refuse processing on this ground. Therefore, Party A will not make any adjustment to the measurement and pricing.
Third, the settlement method
1. Distiller's grains quantity: calculated according to _ _% of Party A's staple food input in winter brewing year.
2. Distiller's grains price: _ _ _ _ _ yuan per kilogram.
3. Alcohol price: the finished product is converted into _ _ _ _ alcohol content and calculated at the price of _ _ _ yuan per ton.
4. Total price settlement: The total price of distiller's grains sent by Party A is offset with the total price of distiller's grains returned by Party B, and the difference shall be paid by both parties.
5. Settlement time: the settlement time is the end of every _ _ yellow wine brewing period.
Fourth, the quality of finished products.
Party B shall not add auxiliary materials in the production process, and the quality indexes of distiller's grains alcohol, including flavor, alcohol content and methanol content, shall meet the national requirements for edible alcohol.
Party B shall not purchase alcohol as self-produced alcohol, or add part of the purchased alcohol to the self-produced alcohol. If found, Party A has the right to demand compensation from Party B. ..
Verb (abbreviation for verb) mode of delivery
Party A is responsible for stacking distiller's grains in a fixed place.
Party B shall be responsible for the shipment and site cleaning of distiller's grains, and ensure timely shipment and clean environment.
Party B shall transport the burnt alcohol to the warehouse designated by Party A according to Party A's requirements.
Six, safety responsibility
Party B shall organize production in accordance with national laws and regulations on liquor production and fire control.
Party B is fully responsible for the safety of production, transportation and loading and unloading.
Seven. articles of agreement
This agreement shall be valid for _ _ _ years from the date of signing.
After the expiration of this agreement, it can be renewed through negotiation between Party A and Party B. ..
Eight. any other business
Matters not covered in this agreement shall be negotiated by both parties.
This agreement is signed in the form of _ _ _ _ _ _ _ _ _ _
Party A: _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _
Date of signature: _ _ _ _ _ _ _
Simplified version of model text of product processing contract in 2022 (V) Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Based on the principle of mutual benefit and cooperation, Party A and Party B have reached the following contract contents:
1. When the raw materials are handed over, both parties * * * weigh the raw materials and * * * retrieve the moisture. Raw materials and yarns are calculated according to the official moisture regain of _ _ _ _%.
2. After receiving the raw materials, Party B shall measure all indicators in time. If the indicators do not meet the requirements, Party A must be informed within 24 hours.
3. Party B can start production only after confirming that Party A's raw materials are qualified. If the raw materials are unqualified, Party B shall notify Party A in writing, and all quality problems arising in the production process after production shall be borne by Party B.. The loss of yarn shall be compensated according to _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ..
4. After the production plan is issued, Party B shall arrange the specific delivery date as soon as possible. If Party B delays delivery, Party A has the right to claim compensation from Party B. ..
5. Party A designates a merchandiser to follow and supervise the whole spinning process, and Party B must fully cooperate with each production process.
6. The color samples produced by Party B's factory shall be confirmed by Party A before mass production. Party B must ensure that the color of the yarn is the same as that of the confirmed sample, and the color difference cannot be lower than Grade 4. If there is any color problem, Party B shall compensate all the yarns.
7. Party B shall provide packing free of charge, and Party B shall notify Party A's personnel to inspect the yarn before packing. The different grades of AB yarn should be clearly written on the label inside the tube.
Eight, Party B's production speed does not meet the requirements of the contract, the shortage of yarn by _ _ _ _ _ _ _ yuan/kg compensation.
Nine, according to the soft recycling, hard recycling, wool imitation classification packaging. If the comprehensive manufacturing rate fails to meet the contract requirements, Party B shall compensate Party A according to the current raw material price.
X. If there are any problems in the process of cooperation, both parties shall solve them in time within _ _ _ _ _ _ _.
XI。 Unit price and productivity:
Note: _ _ _ _ _ _ _.
1, the batch in the above table is the planned yarn quantity.
2. Settlement method: dyeing and spinning are calculated according to the actual yarn standard weight. Yarn dyeing is calculated according to the standard weight of feeding.
3. This unit price is constant within the date agreed in the contract, and neither party has the right to change it without permission.
Twelve. Payment terms:
_____________________。
Thirteen. In case of contract disputes, they cannot be settled through negotiation, but can be settled through legal arbitration.
Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Representative of Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Representative of Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _