1, 4-axis optical anti-shake camera;
Although the 4-axis OIS is newer than the iPhone (the OIS of the iPhone 6s has not been updated), it is indeed a 20 15 technology, which is now supported by many manufacturers. Moreover, Le Max Pro just released by LeTV is also a 4-axis OIS.
In addition, the design innovations mentioned by Lei Jun, such as achieving a better screen ratio and the camera not protruding, are only based on the development of hardware, but if Xiaomi 5 is equipped with a 2 1 10,000 pixel camera, it may also face the problem of camera protruding.
2.DTI image quality enhancement
In fact, everyone is using DTI technology, which is also the technology of all camera sensor manufacturers in 20 15. Strictly speaking, all products in the second half of 20 15 support this technology. Such as Meizu Pro 5, Huawei Mate 8, Le 1s, Hammer T2, etc.
3, Xiaolong 820 processor
Needless to say, Xiaolong 820 processor is the flagship processor commercialized in Qualcomm this year. Before Xiaomi 5, LeTV, Samsung and LG all released models equipped with Xiaolong 820. However, the fast and proud black technology promoted by Xiaomi 5 is mostly based on the processor Xiaolong 820.
4.UFS 2.0 flash memory
The flash memory specification of UFS 2.0 adopts a new standard, which uses serial interface, much like the conversion between PATA and SATA. It also supports full-duplex operation, simultaneous reading and writing operations, and also supports instruction queues. In contrast, eMMC is half-duplex, reading and writing must be performed separately, and instructions are packaged, which is slightly inferior in speed. Moreover, UFS chip is not only fast in transmission speed, but also half lower in power consumption than eMMC 5.0, which can be said to be an ideal match for flash memory of flagship mobile phones in the future.
UFS2.0 is also based on hardware vendors. At present, Le Max Pro and Samsung S7 are using this standard.
5, 3D ceramic body
The 3D ceramic body may become one of the mainstream technologies this year, and Xiaomi 5 is indeed the first mobile phone adopting this technology. It is understood that this process will also be used for the next generation iPhone, that is, the second-generation super mobile phone to be launched by LeTV and Huawei P9.
6. 4G+ technology
4G+ can be said to be the standard of smart phones this year, and according to today's trend, thousand yuan machines will also popularize 4G+.
7. All Netcom 3.0
This technology Xiaomi has not been introduced too much, but from the current situation, most of the flagships equipped with the Snapdragon 820 processor released this year will support this standard.
8, 16 lamp power saving high brightness screen
From the perspective of backlight design, it is difficult to put 16 lights on a 5.2-inch screen. Xiaomi did this because 14 lamp can't meet the high brightness requirement, and can only meet the brightness requirement by increasing the number of LEDs. Secondly, this is not Xiaomi's innovation. One plus two mobile phones from the same screen supplier also have a screen with 600nit brightness.
9, fast charge 3.0
Based on Qualcomm's fast charging scheme, whether the charging is fast or not depends on the power of the charger. According to Lei Jun, Xiaomi 5 only needs 1 hour to charge about 80%, which can only be said to be the average level of fast charging at present. At present, OPPO can charge a 2500mAh battery in 15 minutes.
10, full-featured NFC
Support NFC payment and bus card, it depends on the partner. I believe that under the guidance of Apple Pay, many manufacturers will follow up immediately.
Satisfied, please adopt.
Why do you want to know about black technology? Xiaomi has said what is black technology.
For Xiaomi, when I started, it was called black technology. Four-axis anti-shake, processor (S 1), NFC, 3D ceramics, USF2.0 (although it is not self-made, it still needs water and water), double-opening applications and so on.
What does Xiaomi Black Technology mean?
This black technology is only relative and brings different surprises every year.
take for example
1, 4-axis optical anti-shake camera;
Although the 4-axis OIS is newer than the iPhone and Huawei Mate 8 (the OIS of the iPhone 6s is not updated), it is indeed a 20 15 technology, which is supported by all manufacturers. Moreover, Le Max Pro just released by LeTV is also a 4-axis OIS.
In addition, the design innovations mentioned by Lei Jun, such as achieving a better screen ratio, the camera does not protrude, but is based on the development of hardware. If Xiaomi 5 is equipped with a 2/kloc-0.0 million pixel camera, Xiaomi 5 will also face the problem of camera protruding.
2.DTI image quality enhancement
In fact, everyone is using DTI technology, which is also the technology of all camera sensor manufacturers in 20 15. Strictly speaking, all products in the second half of 20 15 support this technology. Such as Meizu Pro 5, Huawei Mate 8, Le 1s, Hammer T2, etc.
3, Xiaolong 820 processor
Needless to say, Xiaolong 820 processor is the flagship processor commercialized in Qualcomm this year. Before Xiaomi 5, LeTV, Samsung and LG all released models equipped with Xiaolong 820. What has to be spit out is that the fast and proud black technology promoted by Xiaomi 5 is mostly based on the processor Xiaolong 820.
4.UFS 2.0 flash memory
The flash memory specification of UFS 2.0 adopts a new standard, which uses serial interface, much like the conversion between PATA and SATA. It also supports full-duplex operation, simultaneous reading and writing operations, and also supports instruction queues. In contrast, eMMC is half-duplex, reading and writing must be performed separately, and instructions are packaged, which is slightly inferior in speed. Moreover, UFS chip is not only fast in transmission speed, but also half lower in power consumption than eMMC 5.0, which can be said to be an ideal match for flash memory of flagship mobile phones in the future.
UFS2.0 is also based on hardware manufacturers, not unique to Xiaomi, nor is it independently developed by Xiaomi. At present, Le Max Pro and Samsung S7 are using this standard.
5, 3D ceramic body
The 3D ceramic body may become one of the mainstream technologies this year, and Xiaomi 5 is indeed the first mobile phone adopting this technology. It is understood that this process will also be used for the next generation iPhone, that is, the second-generation super mobile phone to be launched by LeTV and Huawei P9.
6. 4G+ technology
4G+ can be said to be the standard for smart phones this year, and 4G+ will be popularized for thousand yuan machines.
7. All Netcom 3.0
This technology Xiaomi has not been introduced too much, but from the current situation, this is also based on the technology of Xiaolong 820.
8, 16 lamp power saving high brightness screen
From the perspective of backlight design, it is very difficult to put 16 lights on a 5.2-inch screen. Xiaomi did this because 14 lamp can't meet the requirements of high brightness. Only by increasing the number of LEDs can the brightness requirements be met, which will increase the power consumption, a little more than the gain. In mobile phones, backlight power consumption is a large part of screen power consumption. 16 lamp technology is generally used on 5.5 or 5.7 screens, which means that the power consumption of Xiaomi 5' s 5.2-inch screen will be close to that of 5.5-inch screen. The real low power consumption should be the scheme of using 14 lamp, which can also reach 600 brightness level. Secondly, this is not Xiaomi's innovation. One plus two mobile phones from the same screen supplier also have a screen with 600nit brightness.
9, fast charge 3.0
Based on Qualcomm's fast charging scheme, whether the charging is fast or not depends on the power of the charger. According to Lei Jun, Xiaomi can charge about 80% at 5 1 hour, which can only be said to be the average level of fast charging at present. At present, OPPO can charge a 2500mAh battery in 15 minutes. For example, LeTV's flash can charge 80% in 40 minutes.
10, full-featured NFC
Support NFC payment and bus card, it depends on the partners, and many manufacturers will follow up soon.
To sum up, among the top ten "black technologies" of Xiaomi 5, 4-axis optical image stabilization and 16 high-brightness screen are barely considered as black technologies, and other so-called "black technologies" are basically based on hardware suppliers, not to mention "black technologies".
What is the black technology of Xiaomi mobile phone? What does it mean to explore black technology and millet fever?
Enthusiast is a word to describe "obsession" with something. According to the preferences of enthusiasts, it can be roughly divided into QQ enthusiasts, movie enthusiasts, Weibo enthusiasts, electronic enthusiasts, audio enthusiasts and mobile phone enthusiasts.
The fever here refers to computer enthusiasts. These friends who like to brush computers are called enthusiasts. Xiaomi mobile phone is an open system, which can meet the needs of computer players.
Black technology is a term that appears in All Metal Frenzy. Originally, it refers to the knowledge developed by non-human beings independently and above the existing technology of human beings, and it is extended to the novelty that human beings can't understand the existing world outlook.
Black technology refers to technology or products that are far beyond the reach of human technology or knowledge, lack of current scientific basis and violate the laws of nature.
This refers to new technology.
~ I hope my answer will help you! If in doubt, please continue to "ask questions"!
~ It's not easy to answer questions. Your adoption is my motivation. Thank you!
It is said that Xiaomi uses black technology. What is black technology and who can?
The picture below shows official website's summary of the new technology used in Xiaomi 5. In fact, some technical friends are also using it.
What is Xiaomi black technology?
What kind of independent processor did Xiaomi come up with recently? This should be regarded as a black technology, and Xiaomi mix looks amazing. This is also a little black technology.
Why is Xiaomi's black technology used by others?
Black technology should not be given to others, and others should pay their own patent fees.
What does Xiaomi 5s black technology mean?
Non-porous ultrasonic fingerprint identification
Xiaomi mix, is it a gimmick or a real black technology?
It's hard to get, so there are many online stores to wait for. It's just a pre-sale spot price increase. If it's urgent, go to the cat and buy it at a higher price.
Lei Jun announced a concept mobile phone named Xiaomi MIX at the press conference. The shape design of the mobile phone is similar to the previous Sharp crystal series, but the visual effect is even more shocking. This is the most amazing product of Xiaomi ever. Even in the whole field of domestic mobile phones, it is rare to find a matching Xiaomi MIX. It adopts minimalist design and full screen. To put it simply, except the bottom frame, the other three parts are borderless screens, and the exaggerated screen accounts for 9 1.3%, which is only slightly larger than the iPhone 7 Plus (the screen is 6.4 inches). The overall appearance of the whole machine is amazing. In terms of configuration, Xiaomi MIX adopts 6.4-inch display screen, equipped with Snapdragon 82 1 Full Blood Processor, built-in 4/6GB memory and 128/256GB body storage space, provides 5 million/16 million pixel front and rear cameras, and has a battery capacity of 4400mAh, which supports dual-card dual standby full netcom and rear fingerprint recognition. The configuration is actually quite powerful, but compared with the previous design, it is less noticeable. In terms of design, Xiaomi MIX adopts an all-ceramic body design. The frame of the fuselage and the back cover are connected by glue-free mortise and tenon, and the screen ratio is as high as 9 1.3%. The traditional earpiece is replaced by a ceramic acoustic system, which converts electrical signals into mechanical energy through piezoelectric ceramics. Through the fuselage, you can answer the phone without the receiver. In addition, it also replaces the traditional infrared distance sensor with ultrasonic wave, which does not need to open a hole in the front and can still prevent accidental touch. Although the mobile phone is amazing, an insider @ kevinwang's diary just said in Weibo that Xiaomi called MIX a concept machine because the production capacity of its ceramic shell is really limited (the yield is too low), only about 1 10,000 units per month. In addition, it is said that the shell cost of Xiaomi MIX is as high as 1000 yuan, so the price from 3499 yuan is simply very kind. It seems that Xiaomi MIX will be hard to buy, but this time I believe no one will say that Xiaomi is a hunger marketing.