1. Before using the product, there should be enough time to adapt to the temperature of the construction area. Pay attention to anti-freeze in winter. The temperature required for transportation and storage is generally not lower than 5℃, and the minimum cannot be lower than 0℃. Therefore, in northern areas, it should be stored in a greenhouse in winter to avoid freezing. In summer, it should avoid direct exposure to sunlight or high temperatures for a long time. In an environment where the general temperature is below 35°C, it should be stored in a cool and ventilated place to extend the shelf life.
2. The product must be thoroughly stirred before use, and it is best to filter it with a 200 mesh mesh.
3. Water-based paint is diluted with water. Generally, clean tap water is sufficient. Deionized water is more effective. Dirty water, water that is too bitter, or too salty (with high calcium and magnesium ion content) is not suitable. use.
4. The amount of water added during construction should be based on the viscosity of the paint. The amount of water added is generally 0-10. According to the local climate, temperature and personal habits, do not add too much water. Add as little or no water as possible.
5. The best construction temperature is between 15-35℃, and the minimum cannot be lower than 5℃. The product will easily not form film and crack when the temperature is low during construction. In the winter in the north, indoor heating can be used for normal construction. If the temperature cannot be guaranteed, it is best to conduct a test first.
6. When applying paint, soak the wool brush in water before use. Wash it with water to remove easily fallen bristles and prevent lumpy particles from appearing during painting. When the brush is not in use temporarily, it can be soaked in water.
7. Before using the putty, you can use an appropriate amount of red, yellow, and black slurry to adjust the color to basically the same color as the wood to prevent it from turning white after applying varnish on dark substrates. The excess putty on the surface must be removed Sand it smooth so as not to affect adhesion.
8. If the paint film is too thick at one time, it will easily shrink and crack during the drying process, and the facade will also sag.
9. Water-based paint dries slowly and is easy to collapse. It is not suitable for thick coating. It is difficult to achieve the high fullness effect of two-component polyurethane paint. It is recommended to use semi-open thin coating as much as possible.
10. Unused paint should be kept in an airtight container, and tools should be washed promptly with clean water.