Does integrated plate weather-resistant adhesive for exterior wall have aging effect?

the main function of weather-resistant adhesive in the whole thermal insulation and decoration integrated board system is to seal and prevent moisture from entering the thermal insulation system. If aging and cracks occur, water may enter, thus losing the air sealing effect. Conversely, air sealing must be ensured, so there is no possibility of aging, cracks and water entry for weather-resistant adhesive.

the weather-resistant adhesive produced by our company should be stored in a dry environment below 27℃, and it is recommended to use it within 9 months from the production date. Advantages: Quality of weather-resistant adhesive: There are a large number of weather-resistant adhesives in the market. In order to improve the rheology of weather-resistant adhesive and make it easier to operate, many companies will add dimethyl silicone oil and solvent oil, but dimethyl silicone oil and solvent oil are easy to volatilize and precipitate, which will lead to pollution of the decorative layer, and in the middle, it will lead to cracking and water inflow of weather-resistant adhesive. The weather-resistant adhesive used by our company is bavly brand neutral silicone weather-resistant adhesive produced by our company, which first solves the problem that the quality of weather-resistant adhesive purchased from the market cannot be controlled, and secondly, the weather-resistant adhesive produced by our company does not contain dimethyl silicone oil and solvent oil, which will not cause the hidden danger of weather-resistant adhesive cracking; Glue quality: because the anchor used by our company is a patented U-shaped fastener of our company, the buckle ear is directly buckled on the panel, so when gluing, it must be wider than the buckle ear and higher than the buckle ear, completely covering the buckle ear, so that the weather-resistant glue covers the decorative layer, forming an L-shaped wrap angle at the external corner of the decorative panel, avoiding moisture from entering from the seam of the panel, and because the buckle ear must be changed when gluing, a kind of adhesive is formed.