Low temperature and high efficiency all-aluminum plate 13 pipe;
The all-aluminum plate 13 dry floor heating terminal with low temperature and high efficiency is a patented product developed by Justin (ZL7 19.5). It consists of three layers: grooved aluminum plate, high-temperature resistant and heat-insulating reflective cloth, and high-density environmentally-friendly extruded board (polystyrene for fast food boxes). It has that core advantage of a single-tube large-area three-layer general structure, can save the energy consumption of the air source heat pump host by more than 40%, solve the problem that the floor area of a room is not hot enough, the system is not energy-saving, the occupied floor is high, and the temperature cannot be turned off in the daytime, ensure the good heating effect of the air source floor heating, and make the air conditioner cooler in summer! Solve the problems of uncomfortable and energy-saving noise, dryness and air conditioning disease of a single central air conditioner!
Advantages of all-aluminum 13 pipe at low temperature and high efficiency;
1. Save high floor space: the thickness of all-aluminum high-efficiency floor heating module is 3 cm. Replace the cement leveling layer in the floor area without increasing the height of the floor; The fan coil unit is matched with the local ceiling of the packaging beam. It doesn't take up extra head space.
2. Excellent cooling and heating effect: all-aluminum plate with high efficiency, small thermal inertia and large cold radiation. In summer, the ground radiation cooling can be quickly supplemented, and the noise of fan coil unit is low, thus achieving the effect of silent air conditioning. The floor cooling air conditioner has high comfort.
Measurement data of ground cooling:
3. Low heat conduction loss: the heat conduction coefficient of aluminum plate is 140 times that of cement, which greatly increases the floor temperature of low-temperature air energy, and increases the wet floor heating surface of mixed apartment from 23 degrees to about 29 degrees, meeting the heating comfort demand in the south.
4. Conducive to accurate control: the all-aluminum module has fast heat dissipation response, and the required inlet water temperature at the cement end is high, reaching the same surface temperature, which is convenient for accurate control of temperature and humidity.
5. No dew condensation during refrigeration: The ground temperature of all-aluminum dry module is high at the same water temperature, and the hidden danger of dew condensation on the ground can be completely eliminated by dynamically adjusting the water temperature through the temperature control center.
6. Convenient installation and use: dry floor heating is completely modular, with quick installation and adjustment and more convenient laying and use.
Configuration of air source host and water tank:
Air source. Air-cooled heat pump: reasonably distribute power according to the actual floor area and the end of floor heating, that is, dry floor heating is 20-25 square meters per horse; Wet floor heating15-20m2/horse, to ensure the comfortable temperature of the floor heating room.
System temperature control center: air source heat pump floor heating is equipped with water tank, which has three functions: regulating flow, balancing water temperature and buffering energy storage to ensure the heat quality of floor heating; The standard water tank is about 60 liters. The temperature control center can supplement the ground radiation to cool down in summer, the fan plate is lower, and the ultra-quiet air conditioner is more comfortable.
Application: Dry floor heating and air conditioning combined supply is suitable for large-area apartments and villas with central air conditioning seats. The invention is suitable for low-temperature circulation system occasions such as air sources, water sources, condensing boilers and the like with the water temperature of 40-45 degrees. With DN 13 floor heating pipe, the applicable area of each loop is10-13m2.
Optimal configuration scheme of dry energy-saving floor heating and air conditioning combined supply;
Air source water machine+all-aluminum plate 13 pipeline low temperature and high efficiency ground heating terminal.
Dock construction drawing:
Hydropower linkage: quick-installed electric floor heating is used in ordinary rooms at night, and air source water heating is used in ordinary areas during the day.
Quick installation of electric floor heating:
13 air source dry circulation system terminal:
The all-aluminum low-temperature and high-efficiency dry floor heating terminal can not only keep the central air conditioner cool in summer, but also enjoy comfortable floor heating in winter. It has the comprehensive advantages of saving 5 cm height for customers, increasing the floor surface temperature by 3 degrees, facilitating heating 1 hour, saving energy by more than 40% in HVAC, making the air conditioner more comfortable and energy-saving, protecting the floor from moisture and mildew, and having lower initial investment than similar low-temperature water wetland heating terminals! !