I don’t think everyone has heard of wood peeling machines before, because in the past, there was no need to peel the wood equipment when processing wood equipment. Everyone knows that wood has a wide range of uses. It can be used to build houses for people to live in, and can also be used to make some high-end furniture. In addition, it can also be used to make some handicrafts. The remaining scraps can also be crushed into wood powder with a wood powder machine and processed into wood powder. Papermaking materials. So what can tree bark be used for? Can it only be used for disposal? In fact, bark is also a very useful thing. Now there are bark paintings made of bark. After the bark is crushed, it can also be used as a material for papermaking. But the bark is joined to the tree, how can it be separated? At this time, you need to use wood debarking machine equipment. Wood peeling machine is also called wood peeling machine or wood peeling machine. The working principle of wood peeling machine is: load logs, branches and other wood into the drum, close the feed baffle, start the machine, and run clockwise. The wood is in the drum. With the operation of the machine, the peeling knife can peel off the bark on the wood. After fifteen minutes, turn off the machine, open the discharge baffle, then start the machine and run it counterclockwise for two minutes. The peeled wood will be automatically sent out from the drum, and the peeling rate can reach 95%. Many industries have high requirements for wood powder. If the bark is not removed, the impurities will be larger, so wood debarking equipment will also be needed.
Provided by Zhengzhou Yahong Machinery!