2. The handbrake is on the right.
3. The brake is in the middle of the foot.
4. Go straight on both sides.
When operating forklift trucks, drivers often make mistakes because of careless foot force, resulting in avoidable losses.
OM's unique micro-motion control pedal enables the driver to accurately move the power on the micro-surface, thus better controlling the operation of the forklift and avoiding all kinds of operation mistakes.
Micro-control pedal can ensure the accurate operation of forklift in short-distance precise positioning, especially in the case of large volume and large cargo shipment, the good effect of micro-control pedal is more obvious.
Extended data:
1, press the clutch pedal to start the engine, gradually add engine oil to warm the engine, properly operate the multi-way valve, and lift the fork off the ground for about 15-20CM.
2. Shift to low gear, choose forward gear or reverse gear, lightly lift the clutch, slow down the throttle and start the forklift.
3, counterpoint to the pick-up place, slow down to adjust the height and level of the fork, lightly step on the clutch and semi-linkage to adjust the direction, only when the fork is completely inserted into the goods, refuel and lift the fork off the ground 15-20CM.
4. Move the forklift slowly, the car should be stable and use less brakes.
5. When the forklift arrives at the delivery place, slow down and gently move the joystick. The goods can't return until they are stable.