Description of lamp holder: (1) The part of kerosene lamp with wick and lampshade. (2) The device connected to the end of the electric lamp wire for installing the light bulb also refers to the number of screw holes of the electric lamp. There are five people in this room.
Sentence of lamp holder: 1. The lampholder and lamppost are moderate in thickness, harmonious and elegant in color and elegant in shape.
If you unscrew it, it really looks like a conjoined double light bulb with two bases and two lamp caps.
3. In order to eliminate this influence, a shading sheet made of opaque material or black plastic foam board can be added to the lamp holder of the flash lamp to prevent the diffused light from shining on the subject.
4. If the position of the lamp holder is too high, the lamp holder is easily blown down by the wind. Therefore, when there is wind, Barisonzi will use sandbags to increase the weight of the lamp holder, and will also ask the assistant to hold the higher lamp holder on the left side of the lamp holder.
5. A large transparent umbrella is installed on a lamp cap of ElinchromQuadra as the main lamp.
6, the lamp holder of lamps and lanterns should be consistent with its purpose.
7. Remove one lamp cap screw (c), three hexagon socket head bolts (d) and gear transmission cover (e).
8. Lamp holders supported only by bulbs should be equipped with conductive wire harnesses.
9. The insulating shell of the lamp holder is free from damage and leakage, and is equipped with a lamp holder with a switch. The switch handle has no metal parts.
10, at present, the products produced are foot pads, O-rings, water polo seals, suction cups, gaskets, silicone film lamp caps, rubber nails, gaskets, earplugs, dust-proof sleeves, sheath collars, water-stop rings and so on.
He screwed the light bulb into the lamp holder.
12. Our newly designed patented shadowless lamp holder can meet the requirements of laminar flow and sanitary disinfection in clean operating rooms.
13, lamp holder The lamp holder and glass shell of ordinary bulbs are easy to fall off at high temperature.
14, the annular voltage divider allows smooth dimming, and the lamp holder can rotate 90 degrees.
15, the company's main products are all kinds of energy-saving lamp shell accessories, E27, E40, E 14, B22 and other models of lamp holders.
16, voltage, lamp holder can be customized according to customer requirements.
17. The lamp holder can protect the LED from physical damage caused by electrostatic discharge when detecting other components, with a maximum of 16 kV. Compared with the indicator light assembly, it is cheaper.
18, self-ballasted fluorescent lamp comes with a complete set of control circuits such as ballast and starter, and Edison screw lamp holder or socket lamp holder is installed.
19. The distance between the lamp holder and the lamp post can be adjusted vertically on this arm.
This lamp has a base with an output of 950 lumens.
2 1, note that the bakelite outer ring with E 14 lamp holder is black, white and gold.
22. Die-casting aluminum petal radiator shell design is adopted, and E27 and B22 standard universal lamp holders are adopted, which is more convenient for installation and replacement.
23, easy to install 220V voltage, E27 screwdriver lamp holder, can be directly replaced.
24, the lamp holder can rotate around three axes, which is convenient to use;