How to improve running speed

Question 1: How to increase the speed of computer? 10 points 1. Press

-right-click C drive

-Properties

-General

-Disk Cleanup-Clean up

-Automatic updates - turn off

-Advanced variables - set TEMP to D drive

-System restore - disable

2. Computer The slowdown is due to the fact that after a period of time, the computer will leave some traces of used hardware in the operating system. These are burdens on the system and will also cause the startup speed to slow down. To eliminate it, use this method:

Step 1: Right-click My Computer, select Properties; click Advanced, select Environment Variables, and enter the Environment Variables dialog box; click New in the System Variables column in the Environment Variables dialog box; click New System Variable In the dialog box, enter Devmgr_show_Nonrresent_Devices in the variable name, enter 1 in the variable value, and then click OK until you exit the system properties window.

Step 2: Enter the System Properties dialog box again, click Hardware, and select Device Manager; in the Device Manager dialog box, click View and select Show hidden devices; in Universal Serial Bus At the controller, select the gray hardware trace, right-click the mouse and select Uninstall.

3. Improve the computer configuration

Question 2: How to improve the running speed of the computer with low configuration? Optimize your computer: 1. "Start" - enter msconfig during operation - OK - Start - uncheck everything except the input method ctfmon. Restart. 2. Right-click "My Computer" - Properties - click Advanced - click Settings in Startup and Recovery - remove all ticks - select "None" for "Write debugging information" - OK - click Error Report under Advanced --Click Disable--Confirm twice. 3. "Start"--Open Folder Options in the Control Panel--Click View--Uncheck the last item Automatically search for folders--OK. Computer - Properties - Hardware - Device Manager - Double-click the IDE controller - Secondary channel - Advanced settings - Select DMA for transfer mode - Select None for device type - OK - Same for the primary channel Settings - OK. 5. Right-click the C drive to perform disk cleanup and system restore cleanup in other options. 6. Change the settings in "C:\WINDOWS\Prefetch (prefetch files) and C:\WINDOWS\Temp (temporary files). Delete everything. 7. Right-click on the browser e--Properties--click 2 Delete and 1 Clear (confirm all of them one by one)--OK. 8. Empty the Recycle Bin. (Cleaning up once a month at 5, 6, 7, and 8 o'clock is enough.) 9. Turn off the debugger Dr. Watson, run drwtsn32, and remove everything except "Dump all thread contexts" 10. Close "System XP" "Built-in Restore", right-click "My Computer", properties, and select System Restore. (It is recommended not to turn it off. Turning it off can only speed up the system, but it is of no benefit to the computer.) 11. Turn off "Hibernation Support": Because the hibernation function takes up a lot of hard disk space, it is better to turn it off. Control Panel--gt; Power options--gt; hibernation (don't check) 12. Speed ??up Win XP Network Neighborhood browsing speed! Open the registry and click: Start-Run-enter regedit-HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Explorer/Remoteputer/NameSpace.

Select the key value in a column: {D6277990-4C6A-11CF-87-00AA0060F5BF}, delete the unnecessary key values ??below. After restarting, you will find that many icons are missing on the desktop. 13. Speed ??up the startup and shutdown of XP: 1: Shorten the waiting time: All rights reserved by the Buried Love God Haogu. Open the registry editor (Start-Run-enter regedit-) and find HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control, and set WaitToKillServiceTimeout to: 1000 or less. (Original setting value: 20000) That is, only wait 1 second when closing the program. Change the HungAppTimeout value to: 200 (original setting value: 5000), indicating that the program will wait for 0.5 seconds when an error occurs. 2: Let the system automatically close the program that stops responding: Open the registry HKEY_CURRENT_USER\Control Panel\Desktop key and set the AutoEndTasks value to 1. (Original setting value: 0) 3: MsConfig Most friends should be familiar with MsConfig, which is a system-built-in Windows setting tool. Click the Start menu, select "Run", then type "msconfig" in the input box and press Enter. What we need to do is the (Startup) tab. Click it. This tab displays all the programs that run when Windows starts. Except for ctfmon, no program here is critical to Windows, so feel free to remove the unnecessary ones. After removing some of the check boxes, Windows will start faster and there will be more free system resources. 14. Cancel the compressed folder tool that comes with XP: Click Start...> (It is ridiculously slow), then you have to consider whether it is poisoned

Secondly, is the chassis fan loud? ! If the CPU heat dissipation is poor, the machine will be very stuck

In addition

Let me tell you the reason why the computer is slow and stuck! Hope it can be helpful to you

ALT F4 patent, it is shameful to copy the content

Many people say how slow their computers are, but in fact they make their computers The reasons for slowness, if you count all the reasons, there are simply too many! However, I will briefly introduce the main reasons that make computers slow!

1. Loading too many programs when booting

2. Turning on the wallpaper on the desktop

3. Failure to clean and reorganize the hard disk regularly

Below, I will explain in detail how to speed up the computer and the symptoms that make the computer slow, and solve the seven common culprits that affect computer performance.

When your computer suddenly slows down, you may wonder whether you did something wrong that caused damage to your computer? In fact, you don't need to worry too much, because a small change may affect the performance of the computer, and in the process of using the computer, it will inevitably cause various slight changes.

There is always a way to solve any problem. Let me detail the seven common reasons that affect computer performance. After solving them, you can enjoy the high performance of your computer with peace of mind.

ALT F4 patent, it is shameful to copy the content

4. Delete the resident program

What is a resident program? Resident programs are programs that are loaded when the computer is turned on, and those programs are called resident programs.

Resident programs not only slow down the startup process, but also consume computer resources and memory faster. In the startup dialog box, the resident programs loaded when starting the computer will be listed in detail!

5. Do not place tablecloths on the desktop and close activedesktop

I wonder if you have noticed that the tablecloths we usually place on the desktop are actually a waste of computer resources! The method to close is: right-click the desktop, click Content, and then select None in the background dialog box. It is recommended that in the appearance dialog box, change the desktop default turquoise to black; as for closing activedesktop, That is to ask you to close the web screen from the desktop.

ALT F4 patent, copying content is shameful

6. Delete some unnecessary fonts

One of the reasons why the system runs slowly is the fonts It depends on the type! The more fonts you install, the more memory you use and slow down your computer! So we want to delete some unnecessary fonts. To delete some unnecessary fonts, you can go to the console and enter a folder called fonts to delete the fonts.

7. Reorganize the hard disk regularly

The smallest unit in the computer hard disk is the sector. A file usually occupies several sectors. Whenever the hard disk is used for a long time, countless new After adding, changing and deleting files, many intermittent sectors will be created, so there will be more and more non-contiguous files, and the hard disk heads will need to spend more time jumping around to read the data, which results in Hard drive slows down. In view of this, Windows will have a reorganized disk. As long as the disk is reorganized, all non-contiguous files will be rearranged neatly. As for the execution time, it only needs to be executed once a week or so.

8. Set up virtual memory

There is a very large data exchange file in the hard disk. It is a place reserved by the system for virtual memory for temporary storage. Many applications It is often used, so the system needs to frequently access a large amount of data from the main memory. Therefore, the speed of accessing this file constitutes a very important factor affecting the speed of the computer!

ALT F4 patent, copying content is shameful

9. Clean up junk files on the system disk and other partitions

1. In the My Computer window, right Click the drive letter you want to clean - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

2. Clear the temporary files, start - run - enter temp - OK.

3. Use Optimization Master or Super Rabbit to clean the registry and junk files.

4. Close some startup programs, start-run-msconfig---start. Except for anti-virus software and input method, general programs can be closed.

5. Delete unused program software.

......gt;gt;

Question 4: How to quickly increase the speed of the computer? 1. Press

-right-click C drive

-Properties

-General

-Disk Cleanup-Clean up

-Automatic update - turn it off

-Advanced variables - set TEMP to D drive

-System restore - disable

2. The computer slows down This is because after the computer has been used for a period of time, some traces of used hardware will be left in the operating system. These are burdensome to the system and will also cause the startup speed to slow down. To eliminate it, use this method:

Step 1: Right-click My Computer, select Properties; click Advanced, select Environment Variables, and enter the Environment Variables dialog box; click New in the System Variables column of the Environment Variables dialog box; click New System Variables dialog box Enter Devmgr_show_Nonrresent_Devices in the variable name, enter 1 in the variable value, and then click OK until you exit the system properties window.

3. Improve computer configuration

Question 5: How to maximize the computer's operating speed? Optimize your computer:

1. "Start" --Enter msconfig during operation--OK--Start--uncheck all except the input method ctfmon. Restart.

2. Right-click "My Computer" - Properties - Click Advanced - Click Settings in Startup and Recovery - Remove all check boxes - Write debugging information and select "None" - OK --Click Error Report under Advanced --Click Disable --Confirm twice.

3. "Start" --Open Folder Options in Control Panel --Click View --Click Remove Last Item Automatically. Check the check mark in front of the search folder - OK.

4. Right-click My Computer - Properties - Hardware - Device Manager - Double-click the IDE Controller - Secondary Channel - Advanced Settings - ―Select DMA for both transfer modes――Select None for the device type――OK――Set the same for the main channel―Confirm.

5. Right-click the C drive to perform disk cleanup and system restore cleanup in other options.

6. Delete everything in "C:\WINDOWS\Prefetch (pre-read files) and C:\WINDOWS\Temp (temporary files).

7. Right-click the browser--Properties--click 2 Delete and 1 Clear (confirm them one by one)--OK.

8. Empty the Recycle Bin.

(Cleaning up once a month at 5, 6, 7, and 8 o'clock is enough.)

9. Turn off the debugger Dr. Watson, run drwtsn32, and delete everything except "Dump all Remove everything except "Thread Context"

10. Turn off "System XP's built-in restore", right-click "My Computer" in the properties, and select System Restore.

(It is recommended not to turn it off. Turning it off will only speed up the system, but it will do no good to the computer)

11. Turn off "Hibernation Support": Because the hibernation function takes up a lot of hard disk space, it is better to turn it off. , Control Panel--gt; Power Options--gt; Hibernate (don't tick)

12. Speed ??up Win XP Network Neighborhood browsing speed!

Open the registry and click: Start-Run-enter regedit-HKEY_LOCAL_MACHINE/Software/Microsoft/Windows

/CurrentVersion/Explorer/Remoteputer/NameSpace. Select the key values ??in columns: {D6277990-4C6A-11CF-87-00AA0060F5BF}, delete the unnecessary key values ??below. After restarting, you will find that many icons are missing on the desktop

13. Acceleration XP power on and off:

1: Shorten the waiting time:

Open the registry editor (Start-Run-enter regedit-) and find HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control,

Set WaitToKillServiceTimeout to: 1000 or less. (Original setting value: 20000) That is, only wait for 1 second when closing the program. Change the HungAppTimeout value to: 200 (original setting value: 5000), which means to wait for 0.5 seconds when the program errors.

2: Let the system automatically close the program that stops responding:

Open the registry HKEY_CURRENT_USER\Control Panel\Desktop key,

Set the AutoEndTasks value to 1. (Original setting value: 0)

3: MsConfig Most friends should be familiar with MsConfig, which is a system-built-in Windows setting tool. Click the Start menu, select "Run", then type "msconfig" in the input box and press Enter. What we need to do is the (Startup) tab. Click it. This tab displays all the programs that run when Windows starts. Except for ctfmon, no program here is critical to Windows, so feel free to remove the unnecessary ones. After removing some of the check boxes, Windows will start faster and there will be more free system resources.

14. Cancel the compressed folder tool that comes with XP: ......> The system ios7 system's accessibility settings have a reduced dynamic effect, which may make you feel that the phone is running faster or because there is too little memory. Delete a few applications you don't need QAQ

Question 7: How to improve The game runs faster without changing the computer configuration. Hello, I think:

1. Clean the C drive. Uninstall non-system software and reinstall it to the Program Files folder on drive D.

Cut user files and multimedia files to drive E. Then delete the empty folder on C drive.

2. The D drive is used as a software installation disk. In the future, any software will be installed in the Program Files folder.

3. Create a "Multimedia" folder under the E drive and create a new " Movies" and "Music" subfolders.

Create a "Program Installation Package" folder on drive E. All software installation packages and game installation packages downloaded in the future will be placed here.

So that you can call the installation at any time when needed.

Third, the F drive can be used as a game drive to install your favorite games.

Fourth, move the IE temporary files out of the C drive and put them into the F drive.

Method: Browser - Tools - Internet Options - Temporary File Settings - Increase the disk space - 2000MB is enough - Move the folder - Select the F drive - OK - ―Restart

Fifth, uninstall the desktop beautification tool and change it to a good-looking wallpaper.

Sixth, create a new folder on the desktop named "Software", and move all shortcuts except the browser, My Computer, Recycle Bin, and My Documents to "Software". to be called at any time. For some commonly used software, such as QQ, kugoo, Maxthon, Qianqian, etc., you can directly drag the shortcut to the quick launch bar. This not only speeds up the display of the desktop, but also makes the desktop simple and elegant.

7. Optimization master Super Rabbit optimizes the registry and deletes redundant parts.

Install one-click CHOST and make a backup in a few minutes. to restore at any time.

Eight, turn off anti-virus software or monitor anti-virus software.

Only turn on the firewall, or protection software such as 360 Guards and Kaka.

Question 8: How to improve the running speed of win7 system Method/Step 1 Speed ??up the startup speed of Windows 7 system

Modify the system settings.

First, open the Windows 7 Start menu and enter the "msconfig" command in the search program box. Open the system configuration window and find the "Boot" option.

Windows 7 has a powerful and convenient search bar. Remembering some common commands can make your operation faster.

Click "Advanced Options" and you will see the settings we are about to modify.

Check "Number of Processors" and "Maximum Memory", and you can choose the size you want when you see the options for your computer. The computer used here will support the largest one. Adjust the processor to 2, maybe your machine will be higher (the number of processors is usually 2, 4, 8)

END

Method/Step 2 Speed ??up Windows 7 system shutdown Speed ??2

Enter "regedit" in the search box on the Start menu of the Windows 7 system to open the Registry Editor

Next, find the HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control item and open it. You can find that there is an item "WaitToKillServiceTimeOut". Right-click and modify it. You can see that the default value of Windows 7 is 12000 (representing 12 seconds). You can change this value here. Modify it appropriately to a lower value, such as 5 seconds or 7 seconds.

END

Method/Step 3 Delete redundant fonts in the system 3

Delete redundant and useless fonts, only Keeping the ones you commonly use will also help reduce system load and improve performance.

Open the Windows 7 Control Panel and find the Fonts folder.

Then click the view mode in the upper right corner and select the category "Large Icons" or "Small Icons", so that you can find the font folder smoothly.

What you need to do at this point is to enter the folder and delete all the fonts that you never use or recognize. The more fonts you delete, the more fonts you will get. Lots of free system resources. Of course, if you are worried that these fonts may not be easy to find when you use them in the future, you can save the unused fonts in another folder and put them on another disk instead of deleting them.

END

Method/Step 4: Window switching to speed up 4

Right-click the computer, open the properties window, and click "Performance" Information and Tools" item,

Click the Adjust Visual Effects item in the window to see the Visual Effects Adjustment window.

Windows 7 displays all visual effects by default. Here you can also customize some display effects to improve system speed

END

Method/Step 5 Turn off the system search index service 5

Turning off this service will go a long way in saving system resources.

Enter "services" in the search bar of the start menu to open the program immediately. Find the "Windows Search" item in the local services, then right-click and select Stop this service!

Find the "Windows Search" item in the local service. Then right-click to stop.

Note: This service of Windows 7 improves the efficiency of search indexing, which can save a lot of time when searching for files. When you can’t find the location of the file, you still need to You have to rely on it to be fast.

END

Method/Step 6 Turn off system sound

Find the "Sound" option in the control panel and open it, then Just remove the "Play Windows startup sound" item that is checked by default in Windows 7 in the Sound Control tab.

Note; PS: Turning off the system prompts does not affect the sound of the computer playing multimedia files, so there is no need to worry.

END

Method/Step 7 Toolbar Optimization

. Toolbar Optimization

in Windows Enter "regedit" in the search bar in the Start menu to open the Registry Editor, then carefully find the HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced folder, right-click the folder and select "New DWORD Value" and then add it Name it "Thumb...gt;gt;

Question 9: How to improve the running speed of the computer. A complete list of methods to improve the speed of computer startup. Practical methods to improve the speed of computer startup.

1. Cancel booting to obtain an IP address

After starting up a computer that uses ADSL to access the Internet in many households, a local connection sign with an exclamation mark will appear in the lower right corner. When you point it with the mouse, it will display "Restricted or "No connection" and the like. This situation occurs because the local connection cannot automatically obtain an IP address, and every time it is started, the system automatically attempts to obtain an IP address, resulting in a period of time after the WINDOWS desktop has appeared. , it does not respond to our operations, and even double-clicking "My Computer" does not respond, seriously affecting the computer startup speed.

The solution is this: right-click "Network Neighborhood" - Properties, right-click "Local Area Connection" - Properties, double-click the "TCP-IP Protocol" item, select "Use the following IP address", Then enter 192.168.0.1 in the "IP Address", set the sub-pass mask to 255.255.255.0, and confirm. In this way, when we turn on the computer next time, we don't have to watch the WINDOWS interface unable to do anything. Basically, the computer can work after turning on the computer, which greatly improves the startup speed.

2. Cancel the useless hardware search when starting up

Most computers have only one hard drive, but the computer has to search for a second hard drive every time when starting up, which is a waste The time at startup. If your computer, like most computers, has only one hard drive, you can cancel the step of searching for the second hard drive when booting; the method is to right-click My Computer-Properties-Hardware-Device Manager-IDEATA/ATAPI Control Device - Primary IDE Channel - Advanced Settings, set the device type whose "Current Transfer Mode" is "Not Applicable" to "None"; then use the same method to set the "Secondary IDE Channel".

3lian

In addition, if your computer does not use a USB flash drive or MP3 and other devices that require a USB port, you can also use a similar method to cancel the system's search for the USB port when starting up. , to further improve startup speed.

3. Remove unnecessary auto-run items

Enter msconfig in Start - Run, press Enter, bring up the "System Configuration Utility" - Start, you can see the boot When the system automatically runs things, remove the check marks in front of the items you do not need, and then confirm to restart; generally speaking, you can remove the check marks in front of the other items except ctfmon and anti-virus software; ctfmon items and It is related to the input method icon in the taskbar. If you remove it, the icon will not be displayed.

4. Further improve the speed

Right-click "My Computer"--Properties--Advanced--"Settings" in the Startup and Recovery item and change all the check marks. Remove it and confirm, which can greatly improve the speed.

Right-click "My Computer" - Properties - System Restore, select "Turn off System Restore on all drives" and confirm. This is very important. The system restore function can be said to be very useless and takes up a lot of system resources.

Right-click "My Computer" - Properties - Advanced - "Settings" in the performance item. If you want to pursue the best speed, please select "Adjust for best performance", which may require Sacrifice some visual effects.

5. Use professional software to make your computer run smoothly

It is recommended to download a "Super Rabbit" software. The recommended download address is: pctutu

This software is powerful , easy to use, it is handy when dealing with rogue software such as "Yahoo Assistant" and "Word Search". It can also clean up junk files and registry, protect your IE from being modified by malicious websites, and can also perform system modifications. Carry out further optimization.

Windows Optimization Master is also good, but it is a little difficult to use and is suitable for people who are familiar with computers. ...gt; gt;

Question 10: How to speed up the computer, defragment it, optimize it with Optimization Master, and delete unused programs

You can also adjust the registration form

1. Speed ??up the power on and off

When shutting down in Windows XP, the system will send a message to the running program and the remote server to tell them that the system is shutting down and wait for a response before the system starts. Shut down.

To speed up the boot time, you can set up the automatic end of the task first. First, find the HKEY_CURRENT_USERControl PanelDesktop and set the key value of AutoEndTasks to 1; then there is a "HungAppTimeout" under this branch and change its value to "4000 (or less). The default is 50000; finally find HKEY_LOCAL_MACHINESystemCurr and ntControlSetControl, and also set WaitToKillServiceTimeout to "4000"; the shutdown speed is obviously much faster with this setting.

2. Increase the broadband speed

The professional version of Windows XP reserves 20 bandwidth by default. In fact, this is of no use to us individual users. Especially if we leave it idle, it is better to make full use of it in "Start → Run". "Enter gpedit.msc in "Open the Group Policy Editor. Find "Computer Configuration→Administrative Templates→Network→QoS Packet Scheduler", select "Limit Reservable Bandwidth" on the right, select "Properties" to open the Limit Reservable Bandwidth property dialog box, select "Enable" and change the original "20" to "0", thus releasing the reserved bandwidth

3. Optimize Network Places

Windows XP. When using Network Neighborhood, the system will search for its own shared directory and printers that can be used as network shares, as well as network-related scheduled tasks in scheduled tasks, and then display them, which will obviously be much slower. If the function is of little use to us, we can delete it. Find HKEY_LOCAL_MACHINEsoftwareMicrosoftWindowsCurrent VersionExploreRemoteputerNameSpace in the registry editor, delete (Printer) and {D6277990-4C6A-11CF8D87-00AA0060F5BF} (Scheduled Tasks) under it, restart the computer, and try again. When you visit Online Neighborhood, you will find that it is much faster.

4. Speed ??up the startup speed

To speed up the startup speed of Windows XP, you can achieve this goal by modifying the registry. Editor, find HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementPrefetchParameters, find the EnablePrefetcher primary key on the right, and change its default value of 3 to 1, so that the scroll bar scrolling time will be reduced;

5. Automatically close the stop-response program

Sometimes, XP will prompt you that a certain program has stopped responding, which is very annoying. By modifying the registry, we can let it close itself. In the HKEY_CURRENT_USERControl PanelDesktop, change the character key value of AutoEndTasks to 1, and then restart Just log out or start.

6. Speed ??up the menu display speed

In order to speed up the menu display speed, we can set it as follows: We can find the "MenuShowDelay" primary key under HKEY_CURRENT_USERControl PanelDesktop and change its Changing the value to "0" can achieve the effect of speeding up the menu display.

7. Clear unused DLL files in memory

In the registry HKKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersion, add an item AlwaysUnloadDLL in Explorer, and the default value is set to 1. Note: If the default value is set to 0, it means stop...gt;gt;