Loubang powerful tile adhesive is a product of the Louweishi brand. It has a very good reputation and is a trustworthy brand among many tile adhesives. Tile adhesives are used to lay ceramic tiles. Since traditional cement laying of ceramic tiles has many shortcomings, the emergence of tile adhesives has gradually replaced cement. Loubang Powerful Tile Adhesive is a tile adhesive highly recommended by the editor. So what are the advantages of Loubang Powerful Tile Adhesive? Loubang Powerful Tile Adhesive is different from the previous cement laying tiles, so it is also How to use Loubang strong tile adhesive?
Advantages of Loubang strong tile adhesive
1. High bonding strength and fast hardening speed, which can greatly improve various The service life and decorative effect of paving materials.
2. It is easy to construct, just process an appropriate amount of water and stir it before use. The pasted tiles do not require blisters and can be pasted directly.
3. Excellent compressive strength, tensile strength, water resistance, alkali resistance and weather resistance, and is not affected by the environment.
4. It has good construction performance, good water retention, workability and falling resistance. During the bonding process, the tiles can be adjusted for 10 minutes and can be operated for 60 minutes.
5. Ultra-thin layer construction can be achieved. The coating thickness is less than half of the traditional process, which saves costs and reduces the shrinkage rate. It will not cause cracking of the decorative adhesive surface due to stress. and shedding.
6. Non-toxic, odorless and pollution-free, it is a truly green and environmentally friendly product.
The use of strong floor tile adhesives
Tile adhesives reduce the dependence of traditional construction techniques on the processes of sprinkling water on the base layer and soaking bricks, and better avoid the Brick soaking and watering are not enough. Mix a package of materials according to the specified water ratio, stir until uniform and without lumps, let the slurry stand for 3 to 5 minutes, stir again, and it is ready to use. Choose a suitable toothed scraper to ensure that the effective pasting area is at least 65% of the board, tile, etc. area. Use a special toothed scraper to apply a full batch of mortar to the base surface to a thickness of 3 to 5 mm, and then use the toothed side of the scraper to pull out stripes in a straight line or S shape. The plane of the scraper intersects with the plane of the base layer at 45 to 60 degrees. The tiles do not need to be soaked in water, they just need to be pasted on the wall/floor in the order they are arranged and compacted. And adjust the tile position within the specified time. Undried glue can be removed with water, but once cured it can only be removed mechanically.
The main ingredients are quartz sand with small particles and high hardness, cement and rubber powder. It is a hydrophobic ethylene/vinyl laurate/vinyl chloride ternary polymer powder that can be redispersed when exposed to water. Its main function is to disperse and entrain air when the bonding mortar is in a fresh state, so it can improve the workability of the mortar; it can enhance the water retention of the mortar, so that the cement can be hydrated over a long period of time. Fuller hydration formation enables the mortar to obtain higher strength; in addition, the rubber powder forms a film after dispersion and plays a reinforcing role as a second adhesive. It is distributed as a reinforcing material and throughout the mortar system, thus increasing the cohesion of the mortar; It can also bridge shrinkage cracks and play a very good sealing role. This ensures that even smooth ceramic tiles with fully vitrified surfaces can still be firmly bonded to the substrate without hollowing out. Flocc is added to the product so that it can make the mortar more elastic and flexible, thus ensuring that the product can be used in elevator rooms and the pasting of marble and ceramic tiles on the exterior walls of high-rise buildings.
Loubang Powerful Tile Adhesive is a tile adhesive recommended by the editor because of its six advantages. These six advantages include high bonding strength, convenient construction, excellent compressive and tensile strength, water resistance, good alkali resistance, good construction performance, cost saving, high efficiency, not easy to crack or fall off, and it is a green and environmentally friendly product. Isn’t this Loubang strong tile adhesive the good quality tile adhesive you are looking for! In addition to good quality, the use of Loubang strong tile adhesive is also very important. Only by using it correctly can the tiles be laid on the floor. better.