Find the compressor
Refrigerator compressors are generally hidden behind the lowest breathable backboard behind the refrigerator. Use a screwdriver to easily unscrew the fixing screws and take out the backboard. After removing the back plate, you will see a cylindrical object, which is the compressor.
Matters needing attention
When removing the backboard, do not forcibly remove the backboard before the screws are completely tightened, so as not to damage the backboard. When disassembling the starter, remember the position of each wire, or take a photo with your mobile phone, so it is easier to distinguish.
Find the starter
There is a box above the compressor, which hides the starter. Find it, and then gently take out the shell of the starter. You will see several wires of different colors connecting the starter and compressor.
Replace thermistor
Next, remove the thermistor from the starter. It looks like a coin. Observe the parameters on the thermistor carefully and write them down. Then, you can go to the electronic parts store to buy a thermistor with the same parameters to replace it, or take the whole starter with you and buy a new one to install at home according to the above parameters.
Do it yourself, save money and be practical.
Through the introduction of this article, you have mastered the maintenance method of refrigerator compressor, which can not only save maintenance costs, but also master a new skill. Try it quickly and let your refrigerator glow with youth!