There are many things that need to be entangled in the decoration, and there are many things that need to be selected in the decoration. At present, there are more and more new ceramic tile products on the market, and the specifications are getting bigger and bigger, and the paving is becoming more and more difficult. Let's see how to decorate the wall.
How to move the brick to the wall without empty space 1 1? Sprinkle water on the dry wall surface to prevent the wall surface from absorbing the moisture in the mortar, and the shape is hollow.
2. Brush Jingdi Ecological Wall Fixing Agent or Interface Agent before tiling to remove the dust on the wall surface and increase the adhesion.
3, kitchen and bathroom wall tiles, waterproof must use Jingdi rigid waterproof coating, bathroom to brush waterproof.
4. Tiles and tiles should be soaked in clear water before pasting, and tiles can only be laid after absorbing water.
5. The whole tile wall must be brushed with tile adhesive, or you can use Jingdi tile adhesive and tile adhesive together, and the effect is better.
6. Tiles are put in water. When firing ceramic tiles, fine dust will be produced in the air. When the ceramic tile leaves the kiln, the dust will stay on the surface of the ceramic tile. When the tile is put into water, the dirt on the surface of the tile will not get wet, so the tile can easily become an empty space. Put the tiles in the water before sticking them.
7. Remove the dirt on the back of the tile. Before tiling, clean the tiles and soak them in water 15 to 20 minutes. After the tile is completely immersed, brush both sides of the tile with a brush to wipe off the dirt on the surface of the tile, especially the dirt on the back of the tile, so that the tile is clean. This will make the adhesion of the tile stronger, so that it is not easy to fall off after being attached.
How to move bricks to the wall? 2. Decorate the wall with big bricks, so that the sticker will not be empty. Pay attention to the following!
1, the thin paste method must be adopted in the construction of large brick wall. First, the wall should be square to ensure the square of the wall.
2. Brush back glue on the back of ceramic tile before laying ceramic tile to increase the cohesive force of ceramic tile.
3. After alignment, slot the wall.
4, evenly daub cement mortar, groove processing, and the wall groove is cross.
5, confirm the location of the shop is stuck and the shop is stuck size and thickness.
6, when the big brick is laid, the joint card and the lower support should be made in advance, and the position of the tile should be confirmed again.
7. Vibrate evenly with a vibrator to ensure the compactness between the ceramic tile and the wall.
How to move the middle brick to the wall? 3 0 1 scheme 1 cutting
Before the appearance of large-size wall tiles, there was a patent for large-size wall tiles-tiles stuck on the wall. The biggest difference between floor tiles and wall tiles is that floor tiles have lower water absorption, higher density and more wear resistance, but the construction is more difficult.
The common method for sticking floor tiles on the wall is cutting: the floor tiles are generally 800mm×800mm in size, and a knife is cut in the middle to become 400mm×800mm in size. In this way, the self-weight of a single tile is small, and the difficulty of paving is naturally low.
So, big bricks become small bricks, so the advantages of large-size tiles on the wall are gone, right It will have an impact, but it will not have all the benefits: the water absorption rate of floor tiles is low, and the joints of tiles that need to be reserved are relatively small. There is no tile seam on the wall, and there is still a certain sense of integrity.
02 plan 2 nap
The large-size ceramic tile wall itself is crumbling, and it is even worse if the wall is smooth. Therefore, on some smooth walls, it is necessary to roughen them to increase the friction of the walls.
What kind of wall is smooth? Remember two kinds: waterproof layer, or solid wall, smooth. When sticking large-size tiles on this wall, you should first roughen it.
Painting the wall is to use cement to make a concave and convex feeling on the wall. There are many methods, and the most common one is the roller: the roller that is painted with latex paint, dipped in cement and brushed on the wall. In addition, it is also possible to throw the broom on the wall, first smooth it on the wall and then scrape the dent with a scraper.
03 Scheme 3 Tile back glue
Why do wall tiles fall off? Because it's not sticky! Since the viscosity of cement mortar is not enough, we will add something with greater viscosity to strengthen the fixation-tile adhesive, which is a kind of glue, to achieve this goal.
Ceramic tile back glue is liquid glue, which can be directly brushed on the back of ceramic tile when used. After brushing the back glue, cover it with cement mortar. It should be noted that in order to give full play to the role of adhesive, the thickness of cement mortar should not exceed 7 mm.
Tile back glue is a very solid paving scheme, which not only helps to fix tiles, but also has a certain pulling effect on the cement mortar behind. Tiles pasted with tile adhesives rarely have the problem of hollowing out. This scheme is also the most popular method of putting large-size tiles on the wall at present.
Scheme 4 tile adhesive
It is only one word short of the glue on the back of the tile, but it is completely different. Tile glue is a thin layer of glue, and cement mortar is still needed as usual. But when using tile glue, cement mortar can be completely eliminated.
You can think of tile glue as a mixture of glue and cement sand: when you use it, add water to make a paste and apply it to the back and wall of the tile respectively. Then use a serrated scraper to scrape grooves perpendicular to each other on the back and wall of the tile to increase friction.
Finally, stick the tiles on the wall: the tile glue is stronger than the tile glue, and the paving thickness is much thinner than the cement mortar (including the tile glue). Users who have requirements on thickness must not miss this treasure method.
05 Scheme 5 Suspension and Fixation
Tiles always fall off? Then simply install a hook and hang it: the method of fixing the pendant is a bit like hanging a decorative painting. Install two hooks on the back of the tile to help fix the tile.
The method is to first open two small grooves on the back of the ceramic tile, the depth of which is 3 mm ~ 5 mm, put the hooks into the grooves and stick them with marble glue-yes, the hooks are stuck on the ceramic tile.
Then, according to the construction method of the front tile adhesive, brush the adhesive on the back of the tile and spread a thin layer of cement mortar for paving. Generally, when the specifications of ceramic tiles exceed 120mm×600mm, they need to be fixed with pendants or directly used for construction.
Scheme 6: joinery board+structural adhesive
The large-size tiles on the background wall make the construction easier. You need to use wooden boards when making the background wall. We can fix the board on the wall first (with nails) to make a general shape.
Then use structural adhesive to stick large-size tiles on the blockboard. It is much more convenient for ceramic tiles to be stuck on the wooden board than on the cement surface, and ordinary structural adhesive is enough to ensure stability.
The biggest disadvantage of this is that the tiles can't bear the load and are afraid of water. It is very likely that the tiles were broken when they bumped against each other, and the boards behind them were deformed when they met with water. Therefore, this most convenient scheme is only applicable to the background wall and cannot be used in other scenes.