What are the differences between pneumatic tools and electric tools?

what are the differences between pneumatic tools and electric tools? Among hardware tools, electric tools and pneumatic tools are two very common and used tools, but today, Guangdong Xiquan Electromechanical Co., Ltd. has compiled and analyzed the following for you: the output power is large according to the ratio of weight to volume, and it is smaller and lighter than electric tools under the same output power. There is no overload fault, even if the pneumatic tool is overloaded. The tool just stops rotating, and once the overload phenomenon is relieved, it will automatically resume normal operation, which has no influence on the tool and will not cause any failure; However, if the electric tools are overloaded, they will generate heat and even burn the motor, which will lead to high maintenance cost and affect the work progress and efficiency. Seriously, it will also threaten the life safety of operators. It is simple to use and maintain, and it can be used when it is connected to the air source. When it is used daily, two drops of sewing machine oil are added to the air inlet of the tool, and the air compressor drains more water. Strong water resistance, although immersion is harmful to tools, it will not be as deadly as power tools; The unique explosion-proof structure can be used in places with explosion danger, such as coal mine operation, because it will not produce electric sparks. Speed adjustment and output power adjustment are simple, which can be carried out simply by operating the handle of the air supply valve and adjusting the regulating valve, and the air supply source can also be adjusted and controlled. Save energy and reduce costs. Equipped with a standard air source in the industrial workshop, you can bring multiple tools to work at the same time. Long service life and high safety. Because it is a device that uses the energy of compressed air provided by the air compressor as the power source, it will not cause the phenomenon of electric tools leaking electricity and hitting people, nor will it produce electric sparks. It can be owned in any place and will not pose a threat to the environment. Pneumatic, one of the most effective means of automation and mechanization, is widely used in all walks of life with high efficiency and high speed. 1. Working ability: Both of them provide many different working modes, but the speed adjustment and output power adjustment of pneumatic tools are simple, and they are smaller and lighter under the same output power. In addition, the pneumatic tool can provide more choices in the speed range, and there is no fever or overload fault. When the overload occurs, the starting tool only stops rotating, and once the overload phenomenon is relieved, it will resume normal operation.