The correct use of electric toothbrush, the structure of electric toothbrush is obviously different from that of ordinary toothbrush, and in the cleaning principle, electric toothbrush relies on the flowing cleaning force caused by high-frequency vibration of motor to thoroughly clean the mouth. The following is the correct way to use the electric toothbrush.
Use the electric toothbrush correctly 1 1. Installation of brush head: put the brush head tightly into the toothbrush shaft until the brush head is locked with the metal shaft.
2, warm water soaking: adjust the softness of bristles with warm water: warm water: soft; Cold water: moderate; Ice water: slightly hard. It is strongly recommended that first-time users soak in warm water (below 40℃) before use! Because more than 95% people in China suffer from periodontal disease, they feel that their gums are sensitive, and the bristles soaked in warm water are very soft and comfortable to brush. After 2~5 times of use, the hardness of the bristles will depend on your preference.
3. Squeeze toothpaste: aim the toothpaste vertically at the middle seam of the bristles and squeeze a proper amount of toothpaste. In order to avoid toothpaste spilling, it is best to squeeze the toothpaste before turning on the power.
4, effective brushing: when brushing your teeth, put the brush head into the thinnest front teeth. Let the teeth be sandwiched between three bristles and pull back and forth with moderate force. Turn on the electrical switch when the toothpaste bubbles. After the brush head vibrates moderately, move the toothbrush back and forth from the front teeth to the back teeth to clean all the teeth! Generally speaking, brushing your teeth with a three-sided electric toothbrush can be thoroughly cleaned in only two minutes at a time.
5. Use a tongue scraper: After brushing your teeth, it is best to scrape off the tongue coating on the tongue with the tongue scraper on the back of the brush head to achieve the effect of thoroughly cleaning the tongue.
6. Foam splash: Please turn off the toothbrush before taking it out of your mouth.
7. Cleaning toothbrush bristles: After brushing each time, put the brush head into water, turn on the electric switch, gently shake it a few times, and then pat the brush head to clean the foreign matter and toothpaste left on the bristles.
How to use electric toothbrush 2 1 correctly? When using the electric toothbrush for the first time, the brush head of the electric toothbrush must be installed correctly. When installing, make sure that the brush head is tightly sleeved in the toothbrush shaft, so as to avoid injury caused by the loosening of the handle of the brush head when using.
2. Before brushing your teeth, you can soak the brush head in warm water to adjust the softness of the bristles, and then squeeze in a proper amount of toothpaste. Remember to apply toothpaste evenly to your teeth, put the brush head in your mouth before starting the toothbrush, otherwise it will cause toothpaste to splash.
3. At present, electric toothbrushes are generally equipped with various cleaning modes. If it is the first time to use an electric toothbrush, it is recommended to choose a softer resistance mode to gradually adapt. After a period of adaptation, you can choose the appropriate cleaning method according to your own oral and dental conditions.
4. In the process of use, you only need to hold the electric toothbrush and move your arm back and forth without using too much force (don't use heavy pressure or sawtooth, which will shorten the service life of bristles). It is suggested that the bristles and gums move slowly along the gums at a 45-degree angle, and all areas of the oral cavity can be cleaned in turn according to the tips of the electric toothbrush. After cleaning the toothbrush, turn off the electric toothbrush first and then take it out of your mouth.
5. After using the electric toothbrush, it is recommended to rinse the toothbrush head with clean water, then wipe the toothbrush body with a dry cloth to keep it dry, and then place the electric toothbrush in a ventilated and cool place, so as to avoid damage to the electric toothbrush due to damp or humid environment and effectively prolong the service life of the electric toothbrush.
6. It is also very important that the brush head must be replaced regularly, because the bristles of the electric toothbrush will gradually wear out after long-term use, which will affect the cleaning ability of the electric toothbrush. Moreover, if the electric toothbrush is placed in a humid place for a long time, it is easy to cause bacteria on the brush head, so it is necessary to replace the brush head in time.
Correct use of electric toothbrush. Be sure to hold it firmly with your hand and hold the pen like an ordinary toothbrush.
From a place slightly away from the teeth, slowly approach the surface of the teeth and brush a part for about 3-7 seconds.
Moving method: Move the toothbrush slowly, one by one. Don't brush by hand, let the electric toothbrush vibrate. Brush for a while where there is a lot of tartar.
After use, rinse with running water when the machine starts to vibrate, and then fully dry. Be sure not to boil and disinfect.
If the bristles are open, the efficiency of brushing teeth and removing tartar will be reduced. At this time, the brush head needs to be replaced, and the replacement interval is usually three to four months.
In order to remove plaque, dental floss and interdental brush should be used together.
Where does the toothbrush mainly brush?
The function of brushing teeth is not only to keep teeth white, but also to remove dental plaque, which is a kind of bacterial biofilm. If dental plaque is not removed in time, it is easy to cause oral diseases such as tooth decay, gingivitis and periodontitis. At present, the most recognized Pap brushing method by dentists is to make the bristles vibrate rapidly in the gingival sulcus to remove dental plaque. For the electric toothbrush, the vibration will happen automatically, and all we have to do is put it in the right position.
Recommended electric toothbrush
Sushmann
September 2007: Shenzhen Canon Europe Industrial Co., Ltd. was established with a registered capital of 95 million yuan.
20 14 12: Hong Kong-funded enterprises invested 282 million RMB and officially became overseas Chinese investment enterprises in Taiwan, Hong Kong and Macao.
2065438+June 2006: Mainly engaged in medical devices and electronic products, with good product and technical support and perfect after-sales service, the company has accumulated a good reputation in the industry.
Sushi SOOCAS
Xiaomi's eco-chain enterprise, sonic electric toothbrush brand, Internet technology company focusing on personal health care consumer electronics.
Shukeshi (Shenzhen) Technology Co., Ltd., founded on 20 15, is an internet technology company focusing on personal health care consumer electronics. Shukeshi is guided by users' needs, independently develops and innovates, and always provides users with intelligent and experienced high-quality personal health care products and services. At present, the core business is sushi sonic electric toothbrush and sushi mobile APP.
Former Hao Bo
Founded in 2006, Ruishengte Technology is a leading manufacturer of oral care products in China, focusing on the research, development, production and sales of acoustic toothbrush, electric toothbrush, tooth washer, toothbrush sterilizer, tooth whitening instrument and other oral care products. Based in China, Rishengte Technology faces the world, absorbs the most advanced concepts in China and the West, and combines its own technological advantages to continuously explore new oral care technologies.
Develop oral care products suitable for the market. The products have obtained many international safety certifications and technical patents from UL in North America, CE and GS in Europe, and have been registered by FDA. Products are exported to the United States, Canada, Japan, Britain, France, Germany, Spain, Russia and more than 30 countries and regions.