First, how to connect the water pipes of the automatic washing machine
The automatic washing machine is equipped with a water supply pipe. The washing machine is screwed at the other end. There are generally two ways to take over the faucet: first, there is a joint with a clip on the pipeline, pull the clip down and put it into the faucet at the same time, and then loosen the hand clip and buckle it on the faucet. Another way is that the pipe comes with its own, and there are four top wires on the joint. Place the connector on the faucet, and then tighten the four jacking threads. It should be noted that the connector with clip must be a special faucet with interface connected to the faucet, while the connector with top thread is connected to the ordinary faucet, otherwise it will not be connected.
Second, the automatic washing machine connecting water pipe matters needing attention
1. Check the connection between the water inlet pipe connector and the faucet. First, gently pull the water inlet pipe to see if it is fastened; Secondly, after the installation, turn on the faucet to see if there is water leakage; Third, pay attention to the fact that the water inlet pipe cannot be bent hard during installation; Finally, before using the washing machine every time, check whether the connection between the water inlet pipe and the faucet is firm, and it will fall off if it is not installed properly!
2. Attention should be paid to the connection between the water inlet pipe and the washing machine: firstly, do not remove the absorbent pad, and check whether the absorbent pad falls off or is damaged before using the washing machine every time. In this case, contact the washing machine after sale in time. Secondly, after the water inlet pipe nut is connected with the washing machine connector, you can shake it slightly to ensure the connection is firm!
3. Attention should be paid to the connection between the water inlet pipe connector and the water inlet pipe: We need to press the slider, insert the water inlet pipe connector into the water inlet pipe, then hang the locking lever on the water inlet pipe connector and put down the slider until there is a bang.
Third, the selection skills of automatic washing machines
1. When we buy a washing machine, we must clearly know what the model of the washing machine means. Many brands of washing machines are XQB-XXXXXX, and the symbol "X" at the beginning stands for washing machine; T-type dehydrator. The "P" common type ranks second; "b" semi-automatic type; "q" automatic type The third "b" impeller; G-shaped roller; "d" stirring type. The fourth place is washing capacity. The fifth place is the serial number designed by the manufacturer. The sixth place is the structural type code, and "S" means double-drum machine, and single-drum machine is not marked.
We don't have to care too much about the weight of dry clothes when buying a washing machine. The washing capacity represents the washing capacity of the washing machine, and the washing capacity of the mainstream is about 5 kg to 7 kg. Generally, the washing capacity of a family of three is about 5-6 kg, and that of a family of four is about 6-7 kg. In addition, the "drying capacity" of the washing machine with drying function is also of great reference value.
3. For the pulsator washing machine, the diameter of the inner tub and the shapes of the pulsator and the inner tub are more important. In fact, due to the limitation of patents, the main difference between brands is here, not in any control procedures and appearance.
When buying a washing machine, the material of the inner barrel is not good or bad. The material of the inner barrel is not necessarily good. In fact, there are many kinds of plastics. Many polymer materials are not cheaper than steel materials, and their durability is not worse than stainless steel. The salesman will definitely say that stainless steel is better than plastic inner barrel when introducing it, and most people will think so. At present, the washing machine with stainless steel inner barrel is generally more expensive than that with plastic inner barrel, so there is really no need to buy a washing machine with stainless steel inner barrel.
For the drum washing machine, the diameter of the inner barrel must be so large, and the only thing that can be reduced is the depth, which is determined by the washing principle of the drum washing machine. If there are too many clothes in this washing machine, there is no way to wash clothes at all, because it takes clothes to a high place by three protruding strips in the washing cylinder and then falls freely to wash clothes. If it is full of clothes, it can't wash clothes at all.