Diameter requirements: the maximum thickness of the pipe wall is 0.8mm, including ￠ 19 ￠ 8 (￠ 10), 22 ￠ 8 and 25 655438+00.
The CNC punching and flanging machine for copper tubes is an internal punching mechanism, and it is the most advanced, simplest and fastest header forming machine at present. Punching and flanging can be completed at one time without drilling. Hold the handle with your right hand and pull the trigger with your fingers. At this time, the punch directly rushes out of the bottom hole in the tube, and the stroke comes out again for flanging. It only takes 0.5 seconds/hole to punch out and form. Because the pipe is grasped by pneumatic fingers, it can completely slide on the high-precision slide rail, and there are corresponding template holes above the slide rail, so the corresponding hole spacing can be controlled when sliding to the next position. It is especially suitable for punching copper pipes (punching, hole drawing, flaring and punching).