What is a locked building?
Locking floor, also known as Yuanyang buckle, is the patented technology of Ding Yuxuan floor. Buckle-type close combination overcomes the problems such as seam detachment, warping and bulging caused by the change of external cold, heat, humidity and so on. In the process of paving, it is completely nail-free, glue-free and keel-free, and directly laid on the ground, which saves the height of the room and can be disassembled and reused. Economical and practical, saving the paving cost per square meter compared with the conventional floor.
What are the advantages and disadvantages of locking the floor?
Advantages of locking the floor:
1. Compared with the ordinary reinforced floor, the requirements for the base material of the locked floor are more stringent. The locking force of locking the floor mainly depends on the connection of tenon and groove. In general, the locking floor needs to bear a large tensile force, so the base material density and relative humidity of the locking floor must remain stable.
2. At the time of installation, the installation of ordinary wooden floor is a troublesome thing, and the placement position must be accurately measured; Locking the floor is very simple, the joints are closer, and the overall paving effect is very good. The use of locking technology reduces the error of manual paving, and the floor can be tapped into the groove when paving.
3. Locking floor has strict requirements for base materials. Under normal circumstances, the ground lock can bear a tensile force of 450kg, so the physical properties such as density, relative humidity and expansion of the ground lock substrate are more stable.
4. The locking floor can be laid without glue. Ordinary flat-buckle wood floors need to be connected by adhesive in the paving process, but the adhesive contains chemical components such as formaldehyde, which is easy to cause indoor pollution if used too much, and is afraid of weak connection if used too little. However, because of the locking force, even without gluing, the joints of the floor are very close, and there will be no problems such as cracking and uplift due to the temperature changes in the four seasons.
5. The biggest feature of the lock is to prevent the floor joints from cracking. The lock floor has reusability, and it is easy to be paved and disassembled without glue and can be reused; Especially when any exhibition or temporary place needs to be held, its decorative effect is remarkable, exquisite and beautiful.
Disadvantages of locking the floor:
1, difficulty in obtaining materials: you should know that not all wood can be used to lock solid wood. There are many kinds of wood, and the texture is not suitable for bearing mechanical tension.
2. Strict installation requirements: the locking floor and the flat buckle floor are installed in different ways, which require special techniques and techniques. In addition, the requirements for the installation and treatment of corners are more stringent.
3. High requirements for production equipment: the lock groove has high requirements for the types of production equipment and base materials, and the general equipment cannot produce the lock floor well, so the lock groove has high requirements for the types of production equipment and base materials.
4, the price is relatively expensive: although the floor lock products are welcomed by many consumers, the disadvantage is that the price is high, which can not meet all economic levels of consumers, which also caused certain disadvantages to the popularization of floor lock products.
That's what Bian Xiao brought you. What is a locked building? What are the advantages and disadvantages of locking the floor? The whole content.