As time goes by, more and more places need to use contracts. Under normal circumstances, contracts must be signed in a prescribed manner. So what issues do you need to pay attention to when writing a contract? Here are some material quality agreements that I recommend for everyone. I hope they can help you!
Material Quality Agreement 1
A Party: (hereinafter referred to as Party A)
Party B: (hereinafter referred to as Party B)
In accordance with the "Contract Law of the People's Republic of China" and other relevant laws and administrative regulations, comply with Based on the principles of equality, voluntariness, fairness and good faith, Party A and Party B, on the basis of consensus, enter into this contract and agree to abide by it.
Article 1. Subject matter
Name, specification, model, unit price of the subject matter
Total price of quantity measurement unit (yuan)
Capitalize the total : RMB: Yuan
Note: The unit price of the subject matter is fixed, the quantity is a temporary estimate, and the final settlement is based on the bill signed by the on-site material receiving personnel.
Article 2. Quality standards
Should comply with national mandatory standards.
Article 3. Delivery (pick-up) method and acceptance
1. Party A shall notify Party B in writing to prepare the goods 3 days in advance, and Party B will deliver the blocks in a timely manner according to the time required by Party A. Reach.
2. Party B is responsible for the packaging, supply, transportation, unloading and other work and expenses of the subject matter, and Party B is responsible for the damage and loss during transportation.
3. Without the consent of Party A, Party B shall not unload the goods at will at the site.
4. The damage rate after arrival should be less than %. Party A will be deemed to have accepted the product after on-site sampling and acceptance and filling out the acceptance form.
5. If there are quality problems with the goods within three days of arrival at the site, Party B shall return the goods unconditionally. The transportation costs and economic losses caused to Party A shall be borne by Party B.
Article 4. Settlement and payment
Article 5. Liability for breach of contract
1. If Party B causes Party A to suffer damage due to the goods supplied not meeting the contract requirements, In case of losses, Party B shall bear 5% of the total contract price as liquidated damages and compensate Party A for all economic losses caused.
2. If Party B fails to deliver the goods to the construction site on time, causing Party A to suffer losses, Party B shall bear 2% of the total contract price as liquidated damages and compensate Party A for all economic losses caused.
3. Party B must ensure that Party A will not be accused by third parties of infringement of patent rights, trademark rights or industrial design rights when using its products. If any third party files an infringement allegation, all legal liabilities and expenses arising therefrom shall be borne by Party B.
4. Party A and Party B have specifically agreed that the creditor's rights under this contract shall not be transferred. If this agreement is violated, in addition to the invalid transfer, the breaching party shall pay the other party 10% of the contract price as liquidated damages and compensate the other party accordingly. All economic losses caused by one party.
Article 6. Termination of Contract
1. If Party B fails to perform the contract in compliance with the requirements and refuses to make corrections, or Party B delays performance of the contract for more than 3 days, Party A has the right to terminate the contract;
p>
2. If Party A delays payment for more than 3 days, Party B has the right to terminate the contract;
3. If the contract cannot be performed due to a breach of contract by one party, and the other party wants to terminate or terminate the entire contract, it must do so in writing. Notify the defaulting party in a formal manner, and the termination of the contract will take effect when the written notice is delivered to the other party. If delivered by mail, both parties agree that it will be deemed delivered 15 days after sending an email to the address of this contract.
Article 7. Force Majeure
If this contract cannot be performed due to force majeure, both parties will not be liable to each other, and either party has the right to terminate the contract. The so-called force majeure refers to objective circumstances that cannot be foreseen, avoided and overcome by both parties.
Article 8. Dispute Resolution Method
Disputes arising under this contract shall be resolved through negotiation between the parties, or may be mediated by the local industrial and commercial administration department; if negotiation or mediation fails, , should be prosecuted in accordance with the law to the People's Court of Chaoyang District, Beijing.
Article 9. Others
1. The attachments to this contract are an integral part of this contract and have the same legal effect as this contract;
2. This contract For matters not covered, the two parties can sign a supplementary agreement. If there is any inconsistency between this contract and the supplementary agreement, the supplementary agreement shall prevail;
3. This contract shall take effect from the date of signature or seal of both parties. If it cannot be If signed or sealed on the same day, the date of signature or seal of the subsequent signing or sealing party shall be the effective date of the contract;
4. This contract is in duplicate, Party A holds a copy, Party B holds a copy, and they have the same legal status. Potency.
Party A (official seal): Party B (official seal):
Person in charge of the enterprise: Legal representative:
Authorized agent: Authorized agent:
p>
Telephone: Telephone:
Material Quality Agreement 2
Party A:
Party B:
After Party B has negotiated amicably, based on the principle of equality and mutual benefit, and in accordance with the provisions of the Contract Law of the People's Republic of China and relevant laws and regulations, and hereby reaches an agreement on the matter of Party A's ordering of production materials from Party B. In order to clarify the rights and interests of both parties obligations, hereby enter into this contract:
1. Order product name and quantity:
2. Product specifications and prices:
3. Product packaging requirements and specifications :
4. Quality standards:
1. The goods supplied by Party B must comply with national quality standards, local quality standards and Party A’s production requirements.
2. _______________________________________________________.
5. Payment method:
Payment will be made within __ days after Party B delivers the goods to Party A and has been inspected and passed by Party A and unloaded.
6. Delivery time and location:
Party B will bear the freight. Party B is responsible for all risks such as damage or loss of goods during transportation.
7. Rights and obligations of both parties:
1. Party B must provide Party A with production enterprise qualification certificates, business licenses and related procedures. The products it provides must comply with relevant national, industry or enterprise standards, and must be accompanied by product certificates, laboratory reports and other procedures.
2. If the packaging or product specifications of the goods provided by Party B do not meet the requirements, Party A has the right to reject the goods. If Party A refuses to accept the goods, Party B must provide goods that meet the requirements in accordance with the provisions of this contract, and Party B will be responsible for all losses caused thereby.
3. Party A shall conduct quality inspection in a timely manner upon the arrival of the goods delivered by Party B. If quality problems are found, Party B shall immediately handle the aftermath on site. If any loss is caused to Party A, Party B shall bear all costs paid by Party A (including but not limited to compensation costs, necessary attorney fees, fines, etc.).
4. If Party A’s production or quality accident is caused by inherent quality problems of Party B’s products, causing losses to Party A, Party B shall compensate Party A for all expenses paid for this (including but not limited to compensation expenses, Necessary attorney fees, fines, etc.), this responsibility is not exempted because Party A has conducted quality monitoring.
5. If Party B fails to deliver the goods within the time specified in Article 6 of this contract, or the delivery is delayed, or the quantity of the goods is inconsistent with the contract, Party B shall compensate Party A for liquidated damages of __________ yuan.
8. Special statement: ____________________________.
9. This contract is made in two copies. Party A and Party B each hold one copy. It has the same legal effect and will take effect immediately after being signed and sealed by both parties. When a dispute arises between the two parties, it shall be resolved through negotiation. If the negotiation fails, either party may file a lawsuit with the People's Court where Party A is located.
10. Place of signing of the contract:
Party A (seal): Party B (seal):
Signature of the representative: Signature of the representative:
p>
Telephone: Telephone:
Fax: Fax:
Account opening bank: Account opening bank:
Account number: Account number:
Signature date: __month__day, year Signature date: __month__day, year
Material Quality Agreement 3
Party A: _______ Legal representative: _________
Party B: _________ Legal representative: _________
In accordance with the provisions of the "Contract Law of the People's Republic of China" and after full consultation between Party A and Party B, a contract is entered into in order to * **Same compliance.
Article 1 Product name, variety, specifications and quality
1. Product name: _______, variety: ________, specifications: ________ (indicate the product brand or trademark)
2. Product technical standards (including quality requirements) shall be implemented in accordance with the following item (___):
(1) Implemented in accordance with national standards;
(2) Implemented in accordance with ministerial standards;
(3) Implemented in accordance with enterprise standards;
(4) If there are special requirements, the technical conditions and technical conditions agreed upon by Party A and Party B in the contract shall be followed. Samples or supplementary technical requirements are performed.
Article 2 Quantity, measurement unit and measurement method of product
1. Quantity of product: ____________________________________________.
2. Unit of measurement and method of measurement: __________________________________. (Follow the regulations of the state or the competent department; if there are no regulations by the state or the competent department, it shall be agreed by Party A and Party B. For electromechanical equipment, if necessary, the auxiliary machines, accessories, supporting products, and consumable spare parts accompanying the main engine shall be clearly stipulated in the contract. , accessories and installation and repair tools, etc. For products supplied as a complete set, the scope of the complete set supply should be clearly defined and a complete set supply list should be provided)
3. The positive and negative balance and reasonable weight difference of the product delivery quantity. Regulations and calculation methods for natural decrease (increase) in transit: _______________________________________________________________.
Article 3 Product Packaging Standards and Supply and Recycling of Packaging _______________________________________________________________. (If the state or the competent business department has technical regulations, the technical regulations shall be followed; if the state and the competent business department do not have technical regulations, it shall be agreed upon by Party A and Party B.)
Material Quality Agreement 4
Party A (hereinafter referred to as "Party A")
Party B (hereinafter referred to as "Party B")
Party A and Party B have negotiated and agreed in the spirit of mutual benefit, equal dealings, *** Based on the principle of mutual development, we have reached an agreement on Party B's provision of products and services to Party A and other related issues. In order to clarify the rights and obligations of both parties, we hereby sign this agreement and agree to abide by it. A complete sample of the purchase and sale contract for fire protection materials.
The first cooperation content
Party B provides Party A with fire-fighting equipment and fire extinguisher replacement and maintenance services, and Party B implements full tracking of the fire-fighting equipment purchased by Party A and the fire extinguishers repaired. .
Article 2 Product Quality Requirements
The product quality and fire extinguisher dressing and maintenance services in the agreement shall comply with the quality requirements stipulated by relevant national laws. Party B also guarantees that it can pass the fire protection inspection.
Article 3 Delivery
3.1 When supplying goods, Party B must provide a "Supply List" with the company's seal and fill in all product names, quantities, unit prices and amounts in detail.
3.2 Party B shall transport the goods to the delivery location designated by Party A.
3.3 When Party A receives Party B’s goods, if it discovers mispackaging, missing parts or other defects, it shall promptly notify Party B. After receiving the notice, Party B shall replace and make up for it free of charge within 2 days to achieve the goal. standards in the agreement.
Article 4 Quotation and Settlement
4.1 The price of the products supplied by Party B shall be based on the price list confirmed by both parties.
4.2 Both parties agree to pay in RMB and the payment method shall be in the form of __________. Party B will also provide legal invoices of equal amounts.
4.3 Settlement method: After the goods arrive and are accepted, Party A shall pay the full settlement price to Party B within 7 working days.
Article 5 Procurement content and price
Article 6 Effectiveness and term of the agreement
6.1 This agreement is in four copies, and Party A holds two copies. Party B holds two copies, which will take effect after being signed and stamped by authorized representatives of both parties.
6.2 The term of the agreement is two years, starting from the day of the month of the year to the day of the year of the month.
Article 7 Change and Termination of Contract
7.1 This agreement can be changed with the consent of both parties. For changes, both parties should make a separate supplementary agreement. Contract template "Firefighting Materials Purchase and Sale Contract" "Complete Collection of Templates".
7.2 This agreement can be terminated by consensus of both parties.
7.3 If one party commits the following breaches of the agreement, the other party has the right to terminate the contract and require the breaching party to compensate for economic losses or assume liability for breach of contract.
① Party B unilaterally terminates the agreement without reason, stops supply midway or stops supply without Party A’s written consent.
② The products supplied by Party B have quality defects and are not replaced within the validity period after being notified by Party A.
③Party A terminates the agreement without reason, causing losses to Party B.
Article 8 Warranty Period and After-sales Service
8.1 The warranty period of the products under this agreement is 24 months from the date of acceptance. If the parts need to be replaced or repaired due to Party B's responsibility, the warranty period will be calculated from the date of passing the re-acceptance, and the period is 24 months.
8.2 Party B provides high-quality services to Party A, implements full tracking services for fire-fighting equipment and fire extinguishers purchased by Party A from Party B, and provides on-site inspection at least once a year. Party A can make an appointment by phone at any time if necessary, and Party B will arrive within one working day.
8.3 The fire-fighting equipment purchased by Party A from Party B will be delivered to Party A’s door for free; Party B will pick up the fire extinguishers for dressing and repair at the door, and return them to Party A in a timely manner after dressing and repair.
8.4 Party A must use, keep, and store fire extinguishers correctly in strict accordance with the fire extinguisher instruction manual; check the pressure gauge frequently. Once turned on, even if there is not much spray or the pressure gauge is below the green line, it must be refilled in time. Maintenance; if necessary, Party B can be notified for on-site guidance.
8.5 Party A enjoys free access to spare parts for dry powder fire extinguisher maintenance by Party B’s contracted unit.
Article 9 Force Majeure
9.1 The force majeure mentioned in this agreement refers to events that cannot be foreseen, unavoidable or insurmountable when signing this agreement.
9.2 When either Party A or Party B is unable to perform the agreement due to force majeure, it shall promptly notify the other party of the reasons for the inability or postponement of performance, and provide written proof within fifteen days. The parties shall negotiate whether to change or postpone the execution. protocol.
9.3 Losses caused by force majeure shall be settled through negotiation between the parties.
Article 10 Liability for breach of contract
10.1 If Party B delays delivery or the delivery quantity is insufficient, Party B shall pay Party A a liquidated damages of 1% of the total payment value of this batch of goods.
10.2 If the products shipped by Party B are substandard or do not meet quality requirements, Party A has the right to refuse to go through the receipt procedures and has no responsibility for safekeeping. Party B will be responsible for all costs and losses incurred. ;
10.3 During the product warranty period, if the products supplied by Party B have quality problems or are damaged, Party B is responsible for repairing or replacing them free of charge, except for those caused by Party A's abnormal use or human factors.
10.4 If Party A terminates the agreement in accordance with Article 7.3 of this Agreement, Party B must refund all the money paid by Party A within one week after receiving Party A’s notice of termination of the agreement. If the equipment has been delivered, Party B must Pick up the device yourself within one week after the payment is returned.
Article 11 Dispute Resolution
11.1 All disputes arising from this agreement or the execution of this contract shall be settled through friendly negotiation between the two parties. If the negotiation fails, either party may file a lawsuit with Party A at the location of The People's Court filed a lawsuit.
Article 12 Supplementary Provisions
12.1 The annexes have the same legal effect as this Agreement and are an integral part.
Party A (signature and seal): Party B (signature and seal): Beijing Jingtai Huasheng Fire Fighting Equipment Co., Ltd.
Agent: Agent: Jiang Jinsong
Telephone: Telephone:
Date: Date:
Material Quality Agreement 5
Demanding Party: (hereinafter referred to as Party A)
Supplier: (hereinafter referred to as Party B)
In accordance with the "Contract Law of the People's Republic of China" and after friendly negotiation between the two parties, Party B provides Party A with energy-saving insulation materials for exterior walls. In order to clarify the rights and obligations of both parties, the following agreement is signed for *** to abide by:
1. Material supply scope:
Party B undertakes the construction of Tongguan Garden Phase I B for Party A The district project site provides exterior wall insulation materials required for exterior wall energy conservation.
2. Construction quality requirements and acceptance:
1. Party B strictly follows the insulation material industry standards and relevant national regulations to ensure material quality.
2. Party B is responsible for on-site sampling and inspection of Party A’s insulation materials once (at a cost of . If the inspection fails, the loss will be borne by Party B.
3. Material unit price:
The quantity is tentative and will be determined based on the on-site receipt.
4. Payment method:
The delivery of the month will be reported to the owner on the 25th. The material payment will be made on the 25th of the following month according to the owner's separate payment amount. The owner agrees to pay the separate payment for the materials
Five , Responsibilities and obligations of both parties:
A: Party A:
1. Party A must pay Party B for materials in a timely manner as agreed in the contract, otherwise Party B has the right to stop supplying materials.
2. Party A is responsible for providing the material arrival plan and reporting the plan one week in advance. Party B will deliver the goods according to Party A’s phone call
3. Omitted
4. A. Party Yin strictly follows the construction plan provided by Party B.
B: Party B:
1. The materials must be delivered to Party B’s construction site in accordance with the quantity ordered by Party A, and the products must be provided with the goods. Factory inspection report (copy), certificate of conformity (original), instruction manual (original), construction plan, manufacturer's qualification certificate (copy) and other information, the copies must be stamped with the official seal.
2. If the external wall insulation system fails to pass the inspection due to quality problems of materials provided by Party B, Party B shall be responsible for any losses caused to it.
3. Party B promises to cooperate with Party A in the quality inspection of the insulation project.
p>6. This contract shall take effect from the date when the first truck of goods supplied by Party B arrives at the construction site of Party A.
7. If any dispute or dispute occurs during the execution of this contract, both parties shall negotiate to resolve it. , if the matter cannot be resolved, proceed as follows: 1. Apply to an arbitration institution for arbitration; 2. File a lawsuit with the People's Court of the jurisdiction.
8. This contract is made in five copies, with Party A and Party B each holding two copies, and the owner holding one copy. , it will automatically expire after the payment is settled.
Party A’s unit (seal) Party B’s unit (seal)
Party A’s client: Party B’s client:
Contact number: Contact number: < /p>
Year, month, day, year, month, day
Material quality agreement sample related articles:
★ Quality assurance agreement template
★ Raw material procurement Contract Agreement
★ Five formats and examples of agreement
★ Simple Material Supply Contract Sample
★ Material Transportation Contract Agreement Sample
p>★ Format and examples of agreements
★ Samples of various agreements
★ Format and examples of agreements
★ Standard materials Template of procurement contract
★ Latest agreement on material procurement contract