How to use solder paste?

jarful

flux

It takes a long time and is used many times. such

flux

Preservation is different from those large production lines that use one bottle, several bottles or even dozens of bottles at a time.

One:

flux

Basic principles of use and storage

The basic principle is to have as little contact with air as possible, and the less the better.

flux

After long-term exposure to air, it will cause

flux

The ratio of oxidation and flux is unbalanced. The consequences are:

flux

There are crusts, lumps, refractories and a lot of tin balls.

Two: a bottle.

flux

Precautions for repeated use

1: The opening hours should be as short as possible.

The opening time is as short as possible, and it is enough to take it out on duty.

flux

Immediately after that, the inner cover should be covered. Don't use a little, always open the lid or always open the lid.

2: Cover the lid.

take out

flux

Immediately after that, cover the inner cover, press it hard, and squeeze out the cover and.

flux

Between all the air, make the inner cover and

flux

Close contact. After ensuring that the inner cover is tightened, tighten the outer cover.

3: Take out

flux

Print as soon as possible

unlike

flux

It is necessary to carry out printing as soon as possible. The printing work should be continuous, and the PCB boards to be processed on duty should be printed in one breath, and placed flat on the workbench waiting for the SMD components. Do not stop printing.

4. Redundancy that has been removed

flux

Processing of

After all the printing is finished, the rest

flux

It should be recycled to a special recycling bottle as soon as possible and stored in isolation from the air according to the precautions (2). Don't put the rest

flux

Put the unused ones back.

flux

In the bottle! In case "a bad piece of meat spoils a pot". So I'm taking it.

flux

Estimate the offset as accurately as possible.

flux

Take as much as you need.

Step 5 Deal with the problem

If it appears.

flux

Never stir when the surface crust becomes hard! ! It is necessary to thoroughly remove crusts and lumps, among others.

flux

Before the official use, we should do a test to see how the trial effect is. If not, it will have to be scrapped.