When we construct latex paint, we often encounter many problems. At this time, we must take corresponding measures. So how to paint the color separation of latex paint into a straight line?
1. How to paint the color separation of latex paint into a straight line
Before starting the latex paint project, you must make the color separation line according to the design drawing, and then use adhesive paper to seal one of the The color is applied first, and then the other color is painted. After the latex paint of the first color is finished and dried, the tape is then used to paint the other color. This method takes a long time, but the color separation line will come out. Able to be very straight.
2. What are the specific steps for latex paint construction
1. Prepare the corresponding tools and ensure the quality of the brushes and paints, so as to ensure that the wall surface is balanced and the color is The saturation is just right and it lasts through multiple cleanups.
2. Clean the base surface to ensure that there are no uneven areas on the wall and that it is clean and tidy. Small holes can be filled with putty powder, and latex paint can be applied after drying.
3. Mix water and latex paint in a ratio of 3:7 and stir evenly, then leave it for 20 minutes until the bubbles inside are eliminated before use.
4. Use a brush or roller to apply the mixture and then paint the wall.
5. If you do it yourself, just apply the primer first and then the topcoat twice. Note that you must wait for the first coat to dry completely before proceeding to the next step.
3. What are the points to pay attention to when applying latex paint?
The advantage of using a brush is that it is more flexible, the construction is more convenient, and it can save a lot of materials. The disadvantages are That's where scratches or unevenness will appear.
The roller works the most efficiently, but it also leaves marks, so the effect is average.
I summarize: The above is the specific method of color-separating latex paint into a line. From the above article, we can see that in fact, when carrying out latex paint construction, we must be careful, from the selection of materials to The tools must be equipped in place to ensure that the quality of the project can meet the standards. I hope it can help everyone.