1. The magnetic acid unloading pump should be installed horizontally, not vertically. The plastic pump body should not bear the weight of the pipe. 400/605-8768 For vertical installation situations with special requirements, the motor needs to face upward.
2. When the suction liquid level is higher than the pump axis, open the suction pipe valve before starting. When the suction liquid level is lower than the pump axis, the pipeline should be equipped with a bottom valve.
3. The magnetic acid unloading pump should be inspected before use. The motor fan blades rotate flexibly without jamming or abnormal noise. All fasteners should be tightened.
4. Check whether the rotation direction of the motor is consistent with the steering mark of the magnetic pump.
5. After the motor starts, slowly open the discharge valve. After the pump enters normal working condition, adjust the discharge valve to the required opening.
6. Before the magnetic acid unloading pump stops working, the discharge valve should be closed first, and then the suction valve should be closed.