1, this project belongs to foundation engineering, and the principle of foundation engineering is firm, firm and durable. Obviously, cement or cement products are more in line with the above principles than gypsum board.
2. The sewer pipe is used to drain water, and there will be a lot of noise in the pipe when draining water, which is very bad. The density of cement is smaller than gypsum board, the thickness of cement and its products is thicker, and the sound insulation effect is much better than gypsum board.
There are many cities in China: the construction and design of this project vary from place to place, including brick-sand cement masonry, finished cement prefabricated panels, filled with sound insulation cotton and plastering, and glass modeling. Personal opinion: it is better to use cement and its related products as sewer pipes!
Question 2: What materials do you need to decorate the riser? Artificial marble. This is easy to handle, and it is guaranteed to be a concealed project. Once something happens in the future, the bag is too complicated and too tightly maintained, you will cry.
Question 3: What kind of brick walls and sewer pipes are used for home decoration? Red brick is the first choice for wall construction, and light brick or keel wall without load-bearing and suspension requirements can be used.
Ensure the use of high-grade decorative stainless steel, marble, middle-grade brick and waterproof board, pay attention to cost performance, and choose good quality PVC.
Question 4: What kind of packaging material is good for water pipes? I used it, and the effect is good. The market prospect is also very good. It is protected by a patent. In decoration, it is an important project to reduce the noise of life, such as replacing single-layer windows with double-layer windows, and paying attention to the sound insulation effect when dividing the wall. However, there is a kind of noise that people often ignore. This noise comes from the drainage sound of domestic sewage standpipe. Toilets and kitchens generally have thick sewage pipes. For the sake of beauty, most families will choose parcels. However, when dealing with sewer pipes, people often ignore the anti-noise treatment. After living in a new house, they found that the sound of running water coming from the sanitation or kitchen every night was so annoying. Xinjingjie decoration experts teach you to do this: 1. Do the sound insulation first, and then ensure that when decorating the bathroom and kitchen, you can't just wrap the sewer pipe with light bricks, but do the sound insulation first, and then ensure the decoration. This work is just a little effort and doesn't cost much. It is recommended that all families do it. There are two ways to solve the noise problem of sewer pipes. One is to wrap the water pipe with asbestos or silencing rock wool for sound insulation. At present, there are sound insulation materials specially used for water pipes on the market, which are simple to operate and cheap. The second is to replace PVC pipe with spiral muffler pipe. Now some new houses themselves use spiral pipes, so there is no need to do sound insulation and there will be no too much noise. 2. Sound insulation should be done. Full sound insulation should not only be applied to the riser, but also to the whole pipeline, including the part installed in the ceiling. If the balcony is also equipped with sewer pipes, it is best to soundproof. 3. Ensure that the materials are qualified. If the riser of kitchen and bathroom is guaranteed, it is best not to use wood keel which is easy to deform and not fire-proof, but to use high-quality light steel keel. 4. It is best not to use cement board for the facade of the pipeline. This material is easy to have small cracks after paving the wall tiles, which will lead to the tiles falling off. Risers are best wrapped in lightweight bricks. Although the thickness of lightweight brick will occupy a certain space, there will be no cracks. 5. Ensure beautiful appearance and convenient maintenance. The drainage of buildings generally depends on public sewers. The noise of running water in the middle of the night, the overhaul of sewer pipes and the leakage of sewage have all become the troubles of owners who are now pursuing quality of life. The adoption of new static boundary and new support materials can solve this problem perfectly. Xinjingjie decoration experts specially reminded: (1) If the sewer pipe is made of bricks, you must leave an inspection port. (2) Not all risers can be wrapped, such as the gas pipeline in the kitchen.
Question 5: What materials do you need to decorate the riser? After the toilet riser is sealed, there are many materials to choose from in addition to the common tiles for surface decoration. -According to your design effect, ease of use, cost, etc. : Glass-It can be fixed with advertisement nail and mirror nails, and the color or specification of glass can be changed. The disadvantage is that water stains have to be wiped, otherwise it is particularly obvious. Paint, wallpaper-suitable for parts with less moisture, such as the dry area of the bathroom. Wood boards-commonly used sauna boards suitable for humid environment, pine slats after anti-corrosion treatment and other metal plates-aluminum plates, aluminum-plastic plates, perforated metal steel plates and so on. The screws and clips are easy to install and facilitate the maintenance of the rear access port. Pay attention to rust prevention treatment. Wood-based panels-like kitchen risers, can also be combined with bathroom cabinets, and other panels and materials can be used, such as cement panels, such as veneers, fireproof veneers, melamine panels, beta-resistant panels, and thousands of silk panels, to pursue an alternative effect: the original roughness of fair-faced concrete walls. Others, such as stone, mosaic, pebble, cultural stone, etc. , are selected by the overall effect of the bathroom interior wall. As long as the materials are suitable, the structure can handle a lot and the effect is good, it depends on the ingenuity of the decoration designer.
Question 6: What does "warranty" mean in home improvement? S "guarantee" is to wrap the exposed pipes of your home with wooden core board, which plays the role of aesthetic performance and sound insulation performance! ! There will be a lot of noise when it is launched into some sewers! !
Question 7: Is it risky to decorate the pipeline? At present, the lower shock tubes are all PVC tubes, which will not rust after being wrapped and have good corrosion resistance. However, the pressure of sewer pipe is low, and the possibility of water leakage is very low, so the protection risk is very small, so it is generally not considered.
If we must say the disadvantages, it is still the problem of dredging after the pipeline is blocked. Manholes will be reserved when installing sewer pipes. It is best not to seal the manhole, leaving a movable door of 15x 15cm.
Question 8: What material is used to decorate the sewer pipe? Commonly used PVC.
PVC (polyvinyl chloride) is the initiator of vinyl chloride monomer (VCM) in peroxides and azo compounds. Or a polymer polymerized under the action of light and heat according to a free radical polymerization mechanism. Vinyl chloride homopolymer and vinyl chloride polymer are collectively referred to as vinyl chloride resin. Its material is amorphous material. In practical use, stabilizers, lubricants, processing AIDS, pigments, impact agents and other additives are often added to PVC materials. It is nonflammable, high strength, weatherability and excellent geometric stability. PVC has strong resistance to oxidants, reductants and strong acids. However, it can be corroded by concentrated oxidizing acids such as concentrated sulfuric acid and concentrated nitric acid, and is not suitable for contact with aromatic hydrocarbons and chlorinated hydrocarbons.
Question 9: What is the better guarantee material? There is a new static boundary protection material with good performance, good sound insulation, convenient maintenance and beautiful appearance. You can go and find out!
Question 10: What is the better material for water pipes used in home improvement? Stainless steel pipe can be used, but it will scale and breed a lot of bacteria after a long time. Just use this as sewage. If it's for eating, it's fine in the short term, but you should pay attention to it in the long term, and it's very troublesome to replace and maintain it.
Stainless steel doesn't mean it won't rust, but it will rust, just relatively slowly. If it is used in the water heater liner, it will not be eaten after all.
Thin-walled stainless steel pipes are complicated in construction, need to be welded, and the cost of pipes is high, which is close to that of copper pipes, but their performance is not as good as that of copper pipes, PPR pipes, aluminum-plastic pipes and pex pipes, so they are rarely used in families. However, some expensive sinks will be introduced to stainless steel pipe fittings.
It is not surprising that Europeans and Americans use this thing. They are primitive and have not evolved as well as Asians. It doesn't matter if they eat some bacteria. Moreover, their standards are lower than ours, not higher. It should be clear that there is nothing to brag about.
If you want to use copper pipes, you can inhibit the growth of bacteria in water, and stainless steel pipes will not be a problem. Copper is also the best material for making water pipes. Some people say that copper will rust, which is patina. This is nonsense from people who don't understand. Copper rust requires conditions, and copper pipes cannot rust without conditions.
If the budget is limited, PPR, aluminum-plastic pipe and PEX pipe are used, which are relatively low in cost, easy to construct and convenient to maintain. They are all food-grade and have good comprehensive performance.