How to disinfect gas bottles

The gas tank disinfection method is to do it indoors at the gas station. After spraying the 84 disinfectant, the gas bottle needs to be wiped with a rag. The action should be gentle and not rocking back and forth.

The main components of the gas generated by water vapor passing through hot coke are carbon monoxide and hydrogen. After combustion, water and carbon dioxide are emitted, with trace amounts of CO2, HC and NOX. The combustion speed is 7.5 times that of gasoline, and the anti-knock performance is good. According to foreign research and patent reports: the compression ratio can reach 12.5.

Thermal efficiency is increased by 20%-40%, power is increased by 15%, and fuel consumption is reduced by 30%. Exhaust gas purification is close to European IV standards (these indicators need to be verified, but the effect is certain), and trace amounts of Platinum catalyst purification. Compared with alcohols and ethers, it simplifies manufacturing and reduces equipment, with lower cost and investment. Compression or liquefaction is similar to hydrogen, but there is no need to remove CO, and the investment in website construction is low.

The reduced cost and investment can also be used to partially compensate for the investment and cost of compression (compression is also required for alcohol ether production) or liquefaction. Toxic, used in industry as fuel and chemical raw materials.

Putting water vapor through hot coal seams can produce cleaner water gas (the main components are CO and H2). The phenomenon is that the flame rises higher and turns into light blue (the result of burning hydrogen and CO). color). The chemical equation is C+H2O (high temperature) --->CO+H2. This is why wet coal burns more vigorously than dry coal.