Use of 406 glue
1, which can be bonded with the same or different materials such as iron, steel, aluminum, titanium, stainless steel, plastic, ceramics, cement, jade, stone and wood.
2. It can be used for emergency repair of oil tank, oil circuit, cylinder head, carburetor and transmission shaft bushing. Cars and motorcycles, as well as bonded non-metallic parts, such as sun visor, car lamp glass, door armrest, battery shell, etc. It can be used for quick bonding, repairing and plugging of oily surface parts of various components.
3. Emergency maintenance and bonding of power equipment such as transformers.
4. Widely used in kitchenware industry, it can replace electric welding to solve the problem of unsightly surface after electric welding.
5. It is used to produce powder-sprayed security doors, mainly used to bond metal skeletons and panels.
It can replace the traditional welding process and overcome the defect of door plate deformation caused by welding process. 6. Used for the bonding of reinforcing ribs and stainless steel plates in elevator industry.
7, used for jade, stone crafts, jade and jade, jade and metal bonding, and stone bonding with various materials.
How to remove 406 glue
1, if we accidentally glue 406 to the skin, because 406 glue belongs to face glue and has no permeability. Better leave it alone. At the longest day and night, it will naturally peel off with the shedding of metabolic skin surface cells. Although acetone can remove 406 glue, it is toxic and suitable for washing clothes. In fact, the skin can be removed in one day, and digging hard will hurt the skin. This trick was taught on TV and even used nail polish remover. Principle: The composition of glue is the same as nail polish.
2. If you accidentally stick 406 glue to your skin, you can use the peeling bath stone in the swimsuit that you can usually buy in the supermarket.
A little soap can remove acetone, but it can be washed. If you don't have it at hand, you can only do more work, wash clothes and wash your hands. 3. Before using 406 glue next time, apply some oily moisturizer such as vaseline on your hands to prevent the pain of touching your hands.
4. Use banana oil nail polish remover. Most of the raw materials of nail polish remover come from banana oil. It is best to use nail polish remover, because banana oil is relatively toxic, and nail polish remover is safer. At the same time, brush your teeth with an old toothbrush. When the glue stains become soft and fall off, rinse them with clear water and brush them repeatedly. Stick absorbent cloth on the back of the clothes with glue marks, then coat some white vinegar on the glue marks, and finally scrub them with cotton dipped in water.
5, with insulating oil, pour the insulating oil in the transformer on the table, 406 glue will soon become soft and can be wiped off quickly. Acetone solution washable 406 glue is a kind of resin glue.
As long as you use an organic solvent that dissolves the resin, such as acetone. However, inhaling acetone is toxic. Pay attention to the method of use. You can stuff the sticky part into the bottle. It is said that if it is frozen in the refrigerator, the glue will fall off. You can try it first. Acetone, gasoline and sesame oil are recommended. I poured some insulating oil from the transformer on my hand, and the 406 glue softened quickly and finally rubbed off. 6. Drop 406 glue in the original place, melt the original 406, and then wash it off quickly with water. The effect is very good.
7. Stick 406 glue on a small area, soak it in hot water and then wipe it with mosquito repellent toilet water. If 406 glue is stuck on a large area, it can be removed by smearing it with acetone for about 5 ~ 10 minutes.
406 glue mark
1. packaging bottle: Le Tai changed the packaging of dry glue in 2006. The original packaging bottle body is oval and the cap is white. After modification, the bottle body is nearly square, and the cap is blue with vertical stripes.
2. Arrow: The new bottle is a new design and patent. There are arrows on the blue bottle cap and bottle body. When closing the lid, align the downward arrow on the lid with the upward arrow on the bottle body. Just press it and hear a sigh, which means the lid is tight. There is an icon on the new bottle label, which indicates the bottle cap design with a click.
3. Labels: Imitation and fake product labels are often printed incorrectly in English.
Either the letters are upside down or they are missing. The English on the label of genuine Loctite glue is absolutely correct. Imitations, fakes, and labels are sometimes blurred. 4. Batch number: The batch number of Le Tai dry rubber products will be attached to it. Generally speaking, the batch number of American products will be printed on the lower right of the storage label (white) at the bottom of the bottle, and domestic products will be laser printed on the bottom of the bottle. If not, be careful. Generally, the batch number of dry glue made in Le Tai is not as many digits as that made in the United States. Generally, the domestic batch number is 7 characters, starting with the number, and the American batch number is 10 characters, starting with the letter L.
5. Listen to the sound: Le Tai 406 glue is thin and the noise is fresh, while the fake Le Tai 406 glue is generally thick, and the sound is dull and thumping when shaking. I suggest you listen more and distinguish more, and shake it before buying.