Ceiling mold requires certain conditions. Generally, there are three necessary prerequisites: suitable temperature, humidity above 80%, and mold spores. Without any of these factors, it is impossible for indoor ceilings to become moldy. First look at the temperature. The temperature that the human body feels comfortable is also the temperature at which mold grows. There is no way and cannot be changed. If you want to avoid mold on the indoor ceiling, you can only consider it from other aspects;
Look at mold next. Spores are very small and fly in the wind. Doors and windows cannot stop them. They can easily enter your room and cannot be eliminated. The only thing consumers can do is to pay more attention to hygiene in daily life; finally, humidity, mold reproduction We need a humidity above 80, which is the humidity we hate. Now there are many ways to reduce the humidity without causing us discomfort. If consumers want to prevent mold from appearing on the ceiling, they must start by controlling the indoor temperature.
Consumers are advised to open windows on sunny days to allow for plenty of ventilation to remove a large amount of indoor moisture. On a rainy and humid day, close the windows and turn on the air conditioner and set it to dehumidification mode. You don’t have to worry too much in summer. As long as the air conditioner is turned on, the humidity will naturally decrease. Sometimes you need to add some water to evaporate. In addition, the door of the indoor wardrobe should be closed tightly like a refrigerator, and then put some desiccant to ensure that the temperature is suitable. Another important point is to check whether there is water seeping into the ceiling, walls and floor of the house. To prevent it, be sure to do a good job of waterproofing during decoration.
Finally, you can also use professional wall mold remover, which can completely kill the wall mold in a short time. At the same time, it can also change the wall structure of the corresponding parts to prevent the growth of wall mold.