It is suggested that the components of pins should be classified and stored in a small drawer-type component box. For example, there are many braided resistances, which can be classified according to the resistance range. Put a drawer below10Ω, a drawer below10Ω, a drawer below100Ω, and other resistors. This depends on the number and types of your components and whether you will often make circuits in the future. The capacitance is similar, and the pins are installed in the drawer.
There is also a large class of SMD. If the boards are often welded, 0805 and 0603 are packed with modular small components, and each series needs about 150 small boxes. The size of this module box is about 3×2×2 cm. For boards that are not frequently welded, and patches below 0402, a clip such as a sample book can be used to save the patch device. This kind of "sample book" is sold on a treasure. It seems that the first shop to apply for a patent is 52edk.taobao.com Chuangyi Electronics Co., Ltd., a professional couple shop. I have bought his things many times, and they are reliable and trustworthy.
Other devices such as sensors are also recommended to be stored in the chest of drawers. If you often do circuits, there must be more than 30 small drawers with the size of 30×20×5cm.