Application for Technician Part 1
Dear Leader:
As a fresh graduate who first came to the company, I have I was worried about not knowing how to get along with people and how to do a good job; but the company's relaxed and harmonious working atmosphere and united and progressive corporate culture allowed me to quickly complete the transition from student to employee.
In the first week after entering the company, I was trained on the company’s relevant rules and regulations in the group conference room, and in the next two weeks, I practiced in alloy rods and wires. After being assigned a position, I was assigned to the xx branch as a technician. I like this position very much. This branch has just been established and has many opportunities and challenges. Because the company had just been established and a series of facilities such as the factory building had not yet been built, and I was a technician, the general manager of the company assigned me to study the technical department of alloy rods for four months. Under the arrangement of the technical department, I had internships in the raw material and casting workshop, vacuum furnace workshop, wire drawing and de-annealing workshop, and extrusion workshop. According to the early production of our xx company, I practiced in the raw material and casting workshop for more than a month. During this more than a month, I mastered the inspection and inspection points of raw material feeding, as well as how to select and sort materials; In the casting workshop, our Vietnamese company mainly focuses on horizontal continuous casting, so during my internship, I mainly focused on horizontal continuous casting. After more than a month of internship, I basically understood the production process of horizontal continuous casting and the structure of the furnace, which will serve as a good foundation for my future work. The work laid the foundation. When I was interning in other workshops, although our Vietnamese company did not have these equipment and processes, I studied seriously with the belief that it is harmless to learn more. I actively asked employees and technicians about things I didn’t understand, and I learned from them selflessly. With their help, I learned a lot of knowledge that I had never been exposed to before. Now I am studying quality management in the Bar Quality Control Department. I follow the inspectors in the Czochralski workshop to learn inspection every day. Although I am very tired every day, I feel very fulfilled. Moreover, this job is also what I like. In the previous technical knowledge Based on this, I think I can do this job quickly.
In my work in the company, I have made certain progress with the enthusiastic help and care of the company leaders and colleagues. On the whole, I feel that I still have many shortcomings and deficiencies in work and life. I can only continue to learn, improve myself at work, and do every task seriously and in a timely manner. I believe that with my high degree of responsibility With confidence and self-confidence, we will be able to correct these shortcomings and strive to achieve greater progress in all aspects.
This is my first job. I love this job very much. I have learned a lot and realized a lot in the past six months. Seeing the rapid development of the company, I feel deeply proud. I am even more eager to work here as a regular employee, achieve my goals, reflect my life value, and grow with the company.
Sincerely,
Salute
Applicant:
February 29, 20xx
Application for technician Book 2
Dear leader:
Hello!
After several days of consideration, mainly from the perspective of future personal technology development, I have decided to resign from my current job. The following is my sincere resignation report, because I have accepted a friend’s invitation to go to another company. A company is engaged in the work of the technical manager of the xx department.
I attach great importance to my working experience in xx company, and I am honored to have been a member of this dynamic group of xx company. I am sure that my experience and experience in xx company will give me It will bring great help to my future career development. I am very grateful to General Manager xx for giving me an opportunity to work in xx company. I will feel honored and proud to have worked in xx company.
Due to the resignation Time is tight, and I hope to complete the resignation procedures in a short period of time. My job is also quite special within the company. It is quite specialized. Currently, I am not involved too deeply in the company's main R&D work. I have developed system, if the company is willing, I can still maintain these things for the company part-time in a short period of time, and help the company at any time with the subsequent development and maintenance of these systems until the company recruits another person suitable for this position. If necessary, I will I will also take time to help the company provide job training for new colleagues.
I hope that xx company’s business will prosper and I wish my colleagues greater success in their careers.
Sincerely
Salute!
Application for Technician Part 3
Dear Leader:
I started to work in the company on the 20th of March. From the first day of , I have integrated myself into our team. It has been more than three months without knowing it. The work of these three months is summarized as follows:
1. Very Pay attention to learning from the old colleagues around you, pay attention to everything at work, see more, think more, learn more, become familiar with the company's situation at a faster speed, and integrate into our team better.
2. Help the procurement to check the balance of accounts payable in the early period, and classify the account bags to facilitate future work; and assist the procurement to recruit new employees, although I am still a new employee in the company. I am a new employee who is still in the probation period, but in April, I still proactively assisted the new employee in purchasing, taught --- everything I know and the issues that should be paid attention to at work, and taught her how to keep an accounting bag. How to check for errors, how to send faxes, etc.
3. Re-create new production accounts based on the verified accounts payable balance, fill in payable vouchers in a timely manner, and register accounts payable detailed accounts, except for the opening balances of factory suppliers that still need to be verified. , most of the accounts payable data are already accurate.
4. Establish a detailed inventory account. In March and April, because the original cost accountant suddenly resigned, without any handover, he turned the pressure into motivation, requiring himself to become familiar with the company's situation as soon as possible and constantly improve his work in order to be more suitable for the company's current situation. The inventory details are divided into Qingdao warehouse, company flow warehouse, company raw material warehouse, Shenyang warehouse, Jinan warehouse, Beijing warehouse, Shanghai warehouse and production workshop warehouse, and the finished product warehouse is summarized to form the company's general inventory details. While setting up the accounts, the documents that should be processed in the current period are processed accordingly. However, the inaccurate data at the beginning of the period affects the credibility of the report. However, some experience has been accumulated in this process, which will be done in future work. better.
5. At work, be good at thinking. If you find that there are problems in processing some documents, you will first communicate with colleagues and share your own solution ideas with colleagues. If you can solve it, you will solve it. If you cannot solve it, you will solve it. Submit it to the superior manager and put forward your own opinions to provide reference.
6. Take over the manual inventory details of the company and branches (external).
Sincerely,
Salute!
Applicant:
__year__month__day
Application for Technician Part 4
Dear Leader:
Time flies, and the 3-month probationary period is about to pass in the blink of an eye. Looking back on the work history of these 3 months, I can’t help but feel sad. Full of emotions. I am both painful and happy as I have just stepped into an unfamiliar construction site. Summarizing the experience and lessons learned during this period of work will help me leverage my strengths and avoid weaknesses in future work and do a better job in technical work.
As a technician, you should not only have excellent professional theoretical and cultural knowledge, but also have rich on-site practical experience. You should also have the ability to communicate with subcontractors, Party A, supervisors, and costs. From the moment I stepped into the construction site, I knew exactly what I should do.
First of all, I need to have a thorough understanding of the drawings, so that I can see what the workers can’t see, explain the key points and difficulties in the drawings, and do a detailed job of the corresponding distribution box. Statistics; secondly, have a detailed understanding of the projects done in the previous stage, including materials, sites, materials, etc., focus on investigating and dealing with problems and errors in the building, and make detailed records; thirdly, extract the material plan, Save money without violating the specifications and drawing requirements, master the on-site materials, and calculate the materials that will be used in the future. The piping and lightning protection will be completed immediately, and strive to avoid waste and excessive surplus; finally, communicate with the subcontractor and Party A , supervision, and cost communication, be neither humble nor overbearing, do what is reasonable as required, and resolutely raise unreasonable things, cooperate with subcontractors, do a good job in the main building while doing a good job in on-site power supply, communicate frequently with Party A, and do a good job Be prepared for emergencies, argue with the cost rationally, and not miss every penny that should be allocated.
Everyone at the site is my teacher and friend. Although they may not have certain professional and cultural knowledge, they have richer construction experience and richer experience than me, and they have a better understanding of life and work. He gave me a lot of help and affirmation, helping me quickly adapt to work, study, and life here; there is also a chief engineer in the company, and when I encounter something I don’t understand professionally, I ask for more vague questions, and I really learned a lot. When you encounter problems, think more and ask more. You will never pretend to understand.
Through these few months of work, I have also found out my shortcomings in my work. First of all, my professional knowledge is still relatively lacking. Secondly, I still lack relevant experience in communication skills and handling some special situations. . Therefore, in future work, you need to read more books, carefully study regulations, procedures and relevant documents, master professional knowledge, arm yourself, improve your work ability, strengthen your sense of work responsibility, communicate more with others, and do your best personally in a timely manner. various tasks.
In the future work, I will continue to summarize and reflect, meet new challenges with a hundredfold enthusiasm, progress and mature in learning, constantly push myself and enrich my energy, improve my own quality and Business level to adapt to the development of the times and enterprises, and progress and grow together with the company.
After a period of training, I have met the requirements for becoming a full-time employee. Here I apply for full-time employment and beg the leader to give me a chance to realize my ideal.
Sincerely
Salute!
Application for Technician Part 5
Dear Leader:
In the blink of an eye, the work of 20 Analyze and evaluate your own work, summarize experiences and lessons, and propose improvement methods so that you can leverage your strengths and avoid weaknesses in future work, and provide a basis for continuously improving work methods, improving work efficiency and performance in the future.
As a technician, I position my job as assisting in workshop production, integrating theory with practice, verifying theory in practice, and using theory to guide production and service production. Continuous self-study and enrichment in practice and production process. Here is a brief review of my work content and some achievements achieved during this year:
1. Insist on integrating theory with practice in the production process, and provide training for existing process personnel and coating process employees , arm production with theory, and the training content covers process knowledge, operating procedures, job safety systems, etc. Among them, there were 4 large-scale trainings. A number of corrective trainings were conducted before and after the shift to address the problems that occurred during the production process. Now the craftsmen have initially mastered the basic knowledge of the vacuum tube film layer and can skillfully adjust the color of the film layer. , performance, target replacement cycle, etc. can be adjusted.
2. While producing, I continue to accumulate experimental data, assist the technical laboratory Luo workers to randomly inspect and submit vacuum tubes for inspection, and adjust the coating process based on the experimental data to ensure that the vacuum tubes produced in the workshop are qualified. The rate has hit new highs repeatedly, and the radiation exposure of vacuum tubes produced in the current workshop can reach ￠581,800 tubes ≤ 4.5 (the national standard ≤ 4.7 is qualified). Heat loss ￠581800 tube ≤ 0.70 or less (national standard ≤ 0.85 qualified).
3. In response to the phenomenon of messy coating colors reported by the market at the beginning of the year, process personnel are required to compare sample tubes of the opened coating machines every day, make adjustments for substandard coatings, and compile a plan to control the coating color for each process. The interim measures have achieved remarkable results in the past six months, and the market response has been positive.
4. According to market needs, in the past year, we have developed and researched vacuum tubes with Temple characteristics many times, such as Temple purple ink gold vacuum tubes, black film vacuum tubes, and eccentric vacuum tube outer coating technology, which effectively broadened the scope of vacuum tubes. In the market, the annual sales volume of Tianpu purple ink gold vacuum tubes has reached more than 300,000 pieces, and the one-time supply of black film vacuum tubes by Niu brand alone has reached more than 50,000 pieces.
5. Based on multiple studies of experimental data, the Temple Golden Triangle vacuum tube was developed, which effectively reduced the impact of the vacuum tube on the heat loss of the water heater. The product will broaden and serve the x market. Now this product has been finalized It is a market product in 20x.
6. Small improvements have been made to workshop equipment. The researched "spear magnet" has applied for a national utility model patent. Since it was put into production, it has been estimated that the service life of the target will be extended to 3 to 7 days. Annual statistics The cost of terminating the company's target materials will reach more than 100,000 yuan.
7. Since x year, many advanced and highly automated equipment have been continuously settled in the vacuum tube workshop. As the workshop process supervisor, I can only be qualified for this position by constantly learning from others and understanding advanced technology. Over the past year, I have continued to learn, and modified and formulated workshop operation techniques, job safety operating procedures, etc.
The achievement of work results is inseparable from the care and help of the leaders. The achievements are outstanding. Summarizing the past work, I feel that there are still deficiencies in many aspects. Through my own reflection and search, I believe that there are mainly the following: Aspects:
First, the ideological emancipation is not enough. The pursuit of stability in daily work accounts for more, and there are still some people who cannot let go, and they are still not so flexible in their approach to work. The pace of exploration and practice in dealing with the problem is not large enough.
The second is that there is still a certain gap in strengthening learning. Especially in work practice, I find that what I know is only half-understood. In the future, we should strengthen theoretical study and be not ashamed to ask questions.
In 20x, I will face more severe challenges. I will, as always, carry forward the spirit of not being afraid of difficulties, working hard, being willing to contribute, and having the courage to innovate. I will master the advanced production technology skillfully, cultivate excellent craftsmen, master and learn advanced craftsmanship knowledge, and use the work attitude of excellence to work rigorously. Meticulous work methods, scientific and realistic work style, standardized and systematic work results, produce high-quality, high-standard products, and repay the company! Realize your own life value on the big stage of Temple.
After a period of training, I have met the requirements for becoming a full-time employee. I would like to apply for full-time employment and beg the leader to give me a chance to realize my ideal.
Salute!