First, the characteristics of geothermal cleaning machine
1, the design has obtained the national patent; The practical and fashionable design concept is the best in domestic geothermal cleaning machines.
2, the connecting pipe can be connected with the water separator for cleaning without disassembling the pipe;
3. No chemicals and chemicals are needed, which will not cause any corrosion to the inner wall of the pipeline and system components, and the discharge will not cause pollution to the surrounding environment.
4, no blockage, suitable for cleaning all kinds of complex pipeline systems.
5, small and light, easy to operate, clean and fast.
6, cleaning inspection method is simple, through observation. You can observe the effect of cleaning and sewage discharge, and you can also compare the pipelines before and after cleaning.
7. This equipment can not only clean geothermal pipelines, but also clean radiators, radiating fins, domestic water pipes, domestic water heaters and geothermal pipeline systems.
8, close the water separator, backwater separation master valve;
9. Connect the pulse introduction pipe, and connect the digital computer pulse generator with the plug end of the water main bearing of the water separator;
10 connect the water pipe and connect the water source with a computer pulse generator;
1 1. Connect the gas pipeline and connect the air compressor with the computer pulse generator;
12. Connect the sewage pipe, with one end connected to the plug end of the main bearing of the water separator and the other end inserted into the floor drain.
Second, how to clean the geothermal pipeline
1, tap water flushing
Advantages: The method is simple to operate and does not need other drugs or instruments. Rinse directly with tap water and drain.
Disadvantages: the cleaning is not thorough enough, and each section of pipeline needs to be opened and cleaned in person.
2. Chemical soaking
Advantages: thorough cleaning can fully dissolve the sticky mud attached to the pipe wall, and food-grade raw materials are prepared, which will not cause corrosion to the geothermal pipeline.
Disadvantages: The chemical reagents used for geothermal cleaning, such as strong acid or strong alkali, do not consider the bearing capacity of geothermal pipelines, and the pipelines and related components are seriously corroded. Without corrosion, the purpose of descaling cannot be achieved.
3, high pressure projectile cleaning
Advantages: thorough cleaning, using the friction between the cleaning bomb and the pipe wall to remove the sticky mud attached to the pipe wall without damaging the geothermal pipeline.
Disadvantages: it is necessary to disassemble the ground heat pipe, and the underground pipeline is not suitable for construction, so it is easy for the cleaning bomb to get stuck in the pipeline; At the same time, it is easy to cause secondary damage to the original water separator, valves and other related components.
4. Physical pulse cleaning technology
Advantages: no chemicals are needed, and the geothermal pipeline is not disassembled. Because of its unique cleaning principle, the valves of the main pipeline and geothermal water separator can be cleaned at the same time to avoid valve blockage caused by long-term scaling.
In the above article, I told you about the geothermal cleaning machine. I believe everyone must know something about it. Pay attention to the decoration skills when decorating. I hope this helps you.