Lifting hanger parts
What style is the lifting hanger now? Because the electric clothes rack is used outdoors for a long time, the steel wire rope is rustproof and soft. Cody electric clothes rack adopts super-thick galvanized steel wire rope or stainless steel wire rope composed of 77 strands of thin steel wire (with oil-filled cotton core inside), and the oil-filled cotton core is added to the steel wire rope, which can ensure the electric clothes rack to be smooth, soft and rust-free in three years.
What are the main accessories for lifting hangers? The clothes drying rod is the main part of the clothes hanger, and its thickness is the guarantee of bearing capacity. Cody electric clothes rack adopts one-piece aluminum-titanium alloy clothes rod (thickness 1.2mm) and imported 304# stainless steel pipe (thickness above 0.5mm), which is super load-bearing, non-bending, non-deforming, non-fading and non-rusting.
When we want to buy clothes hangers, we might as well consider lifting clothes hangers. Hand crank is the core component of electric clothes rack. Try it when you shake it. It's light, steady and noiseless. Cody electric clothes rack adopts the integrated design of heart-to-heart and hand-to-hand, which has won the national patent, automatically shifts gears, adopts imported bearings, and is light and smooth, ensuring more than 20,000 times of trouble-free free lifting.
Disassembly of hand crank of lifting clothes rack
What do you need to master in the installation method of lifting hangers? First observe the installation environment of the balcony and turn off the balcony power supply (important note: if the balcony light has been installed, remove the balcony light first). Open the product packaging box and check whether the product parts are complete.
If the lifting clothes rack fails, how should we remove its hand crank? Using the installation template, measure the size of the balcony installation position, determine the installation position, and mark four expansion screw holes Ф10x80. Drill four expansion screw holes Ф10x80 with an impact drill (important note: the depth of expansion screw holes is generally about 4-5CM). Screw the expansion screw into the hole, loosen the screw so that the distance between the washer and the nut is about 5 mm, and then remove the nut at the other end.
Install the scissor racks at both ends to the main machine (important note: please pay attention to the motor end and the non-motor end, and the motor end has a travel switch to control the scissor racks to rise and fall. When installing, please pay attention to the side of the scissors frame with pulley to be installed at the motor end, and pay attention to the position of the travel switch spring plate when installing). Screw in two M5x6 screws (screw them in place, so don't tighten them too tightly, which may cause the scissors rack to descend and ascend abnormally), then insert the wire rope into the balancing device, and then tighten the screws to fix the wire rope. This is not a good way to disassemble the lifting hanger.
With the continuous improvement of people's living standards, people are pursuing more and more quality of life. Even the most common clothes rack, under the increasing demand of people, the lifting clothes rack has also ushered in new development. Once the lifting clothes rack breaks down in use, Bian Xiao's disassembly analysis of the lifting clothes rack today will definitely help everyone.