What is the difference between Shengxiang Kangyi and Shengxiang? What is the process of laying Shengxiang flooring?

People’s wages have increased significantly in the past two years. Under such circumstances, many people have confidence in housing transactions, and since they have already thought about buying a house , some things related to the house must not be left behind. What is the difference between Shengxiang Kangyi and Shengxiang? What is the process of laying Shengxiang flooring?

People’s wages have increased significantly in the past two years. Under such circumstances, many people have gained confidence in housing transactions. Of course, people’s choice of later decoration materials is also A topic of greater concern is that Shengxiang Kangyi and Shengxiang are well-known brands. People who don’t know these two brands will think that they are the same product. So let’s briefly understand Shengxiang Kangyi and Shengxiang You. What's the difference? What is the installation process of Shengxiang Flooring?

What is the difference between Shengxiang Kangyi and Shengxiang?

Shengxiang Flooring is a brand, Kangyi is a product category under the brand (three-layer solid wood composite flooring), and Aspen is another category (multi-layer solid wood composite flooring).

Holy Elephant Kangyi, the Holy Elephant solid wood flooring with its own keel, is the representative category of high-end solid wood flooring under the Holy Elephant Group. It is the result of the strategic cooperation between the Holy Elephant Group and Swedish Kangshu in 2005. At present, the product line of this category is rich, covering three-layer solid wood flooring-based "Holy Elephant Kangshu" and "Duoshu Yipai", the original category "Tree Code Core", solid wood structure "Otaku Man Otaku Woman", and single solid wood Louvre flooring has five major product categories, with an annual production capacity of 6 million square meters, bringing high-end enjoyment of home life to domestic consumers.

What is the process of laying Shengxiang flooring?

1. Clean and sweep the ground. Use "cement or quick-drying powder" to level the uneven ground, and keep the ground dry.

2. Pop up a vertical line with the wall around the ground as a reference line for paving the floor (the distance between the reference line and the wall is 10 to 12mm.

3. Pave the floor Foam floor mat (first lay 0.2mm thick PVC moisture-proof mulch film), and the floor mats are overlapped and bonded with plastic tape (the tower joint part is not less than 150mm)

4. Try When laying the floor, first try to lay three rows of unglued rows aligned with the elastic baseline. The joints between the boards must be staggered by at least 20 cm. The last floor panel of each row must not be less than 30 cm. Lay the boards parallel to the lighting direction or along the extension line of the room.

5. Apply glue. It is required to apply glue on the tongue. After each row of floors is laid, you should pull the wire or use a square ruler to check whether it is straight; Use wooden wedges to tighten the gaps on the wall. If the width of the last row of floors is less than 50mm, this width should be cut out of the floor.

6. The skirting boards should be installed after the floor is installed. Drill holes in front of the floor); use ink lines to pop up the horizontal line on the upper edge of the skirting board, pop up the edge line of the skirting board thickness on the floor, and install it within the line. The distance between the wooden wedges in the wall shall not be greater than 750mm, and the length of the wooden nails shall not be less than 2.0 times the thickness of the skirting board. 5 times. The intersection of the inner and outer corners of the skirting board should be cut at 45 degrees. The skirting line and the wall should be tight and seamless.

What is the difference between Shengxiang Kangyi and Shengxiang? What is the floor laying process? After knowing enough, choosing flooring is definitely not difficult. It is normal to have differences between brands, but choosing among different brands is more complicated, so once You can easily identify a brand and not change it, just ask about the process in advance