In the era of continuous progress, there are more and more places where we can come into contact with job responsibilities. Job responsibilities are specific job descriptions, which can be divided into different job types. What kind of job responsibilities are effective? The following is my collection of job responsibilities of the mechanical processing department (selected 10) for your reference, hoping to help friends in need.
Responsibilities of Mechanical Processing Department 1 Main responsibilities:
1. Participate in the feasibility investigation and system scheme design of product project establishment;
2. Formulate structural design scheme and project plan, develop new product structure and new technology, and improve product performance and quality;
3. Undertake the detailed design of product structure and parts;
4. Undertake the development, debugging and related technologies of the prototype;
5. Tolerance analysis and dfma (Manufacturing and Assembly Design) inspection;
6. Review molds with manufacturing engineers;
7. Review mold samples, design changes and final acceptance of parts;
8. Provide mechanical support for various tests such as emi, esd, safety and reliability;
9. Solve problems in product development, track problems and discuss technical problems with customers;
10 to provide technical support for mass production of products.
Working ability requirements:
1, proficient in fluid engineering machinery design knowledge;
2. Familiar with the design of plastic parts, sheet metal, die casting and casting; Ensure simple parts design, high quality, few defects and low manufacturing cost, and at the same time, the corresponding die structure is simple and easy to manufacture and process;
3. Familiar with product assembly design; The designed product assembly should make the assembly process simple, the assembly efficiency high, the assembly defects few, the assembly cost low and the assembly quality high. Ensure that product design products are carried out in the shortest time, the lowest cost and the highest quality;
4, master the knowledge of tolerance analysis; Able to use tolerance analysis to optimize product design quality and solve practical problems encountered in product development;
5. Familiar with related materials, molds and surface treatment technologies;
6. Ability to analyze and solve problems (5w, etc. );
7. Familiar with product development process, especially manufacturing and assembly process, in order to shorten product development time and improve product development quality;
8. Be familiar with relevant product testing requirements, such as emi, esd, safety and reliability, and design products to meet these requirements;
9, familiar with the product industry standards of fluid engineering machinery;
10, proficient in using cad, solidworks and other software, familiar with fluid and stress analysis software;
1 1, good innovative spirit; Be able to learn the relevant theoretical knowledge of triz;
12, team spirit, through cooperation with manufacturing engineers, assembly engineers and test engineers, thus improving the quality of product development.
Responsibilities of the mechanical processing department. Job responsibilities:
1. Design, development, installation and debugging of non-standard automation equipment, function test equipment and industrial robot application system;
2. According to the project plan and customer's technical requirements as design input, design and development work such as equipment integration design and outsourcing parts selection are carried out.
3. Be responsible for the technical communication with customers after the whole project is imported, the electromechanical interaction with the electrical person in charge of this project, and the coordination with procurement and manufacturing;
4. Be able to independently complete and organize project team members to complete the compilation, change, update and archiving of project output data;
5. Responsible for after-sales service technical support of related projects;
6. Complete the temporary tasks assigned by the company.
Second, the job requirements:
1. major in machinery, mechatronics, automobile manufacturing, etc. Bachelor degree or above;
At least 2.3 years experience in mechanical design and project management of non-standard equipment;
3. Skillful use of at least one 3d design software;
4. Familiar with the project operation process;
5. Good English communication skills;
6. Innovative and enterprising spirit, good communication and coordination skills and teamwork spirit.
Job Responsibilities of Mechanical Processing Department 3 Job Description:
1, the main structural design of manipulator, physical calculation and selection of mechanical parts;
2. Develop and design the parts of the manipulator, and consider the equipment cost, mechanical function and overall appearance optimization in combination with the practical application of the manipulator;
3, mechanical equipment installation, on-site guidance and supervision of installation, to ensure mechanical accuracy, quality and progress;
4. Actively organize standard operation training for workshop assembly team members;
5. Other temporary jobs
Requirements:
1, bachelor degree or above, major in equipment and mechanical automation, proficient in operating 3D solidworks software;
2. More than three years working experience in injection molding automation equipment and sheet metal manipulator, and can independently design mechanical structure;
3, responsible for product development, processing, manufacturing, improvement and marketing in the process of drawing design;
4. Strong team awareness, strong sense of responsibility, strong ability to coordinate and solve problems, and good communication and expression skills.
Job responsibilities of mechanical processing department 4 Description of responsibilities:
1. Under the leadership of the chief engineer, responsible for the design, procurement, outsourcing, assembly, debugging and training of welding positioner, welding fixture, welding auxiliary equipment and non-standard automation equipment;
2. Responsible for filing technical documents and patent applications;
3. Be responsible for other affairs arranged by the company.
Requirements:
1, honest and practical, with strong execution and strong sense of responsibility;
2. Modest and studious, rigorous and meticulous in work;
3. Need to sign a three-year contract and a non-competition agreement;
4. Work cannot be completed in time due to capacity problems, and overtime is required (all the above five points are required);
5. First-line mechanic experience or relevant non-standard automation design experience;
Job responsibilities of mechanical processing department 5 Job responsibilities:
1, actively develop users and seek sales opportunities;
2. Be responsible for receiving orders, technical support, sales and collection of spare parts business, and complete sales tasks;
3. Maintain customer relationship, actively deal with after-sales problems and improve customer satisfaction;
1, responsible for sales and promotion of the company's products;
2, according to the marketing plan, complete the sales target of the department;
3. Open up new markets, develop new customers and increase the sales range of products;
4. Manage and maintain customer relationships and long-term strategic cooperation plans between customers.
Qualifications:
1, major in mechanical and electrical engineering;
2. Have working experience in sales industry or merit-based admission of fresh graduates;
3, quick response, strong expression ability, strong communication skills and communication skills, and affinity;
4. Have certain judgment ability and good customer service consciousness;
5. Have a sense of responsibility and be able to work under great pressure;
6. Have team spirit and be good at challenges.
Job Responsibilities of Mechanical Processing Department 6 Job Description:
1. Confirm that the component repair work has been completed as required, and after the technical state of the component meets the airworthiness requirements, complete the signature of the component worker and be responsible for the quality of the component repair;
2. Responsible for completing the component handover with the aviation material maintenance engineer;
3. Be responsible for handing over the signed complete component repairman card to the parts repair workshop, and the workshop will arrange personnel to review it and hand it over to the quality management office;
4, parts repair mechanic in addition to perform the duties of parts repair, should also undertake the duties of parts quality inspector according to the need;
5. Complete other work arranged by superior leaders.
Requirements:
1, college degree or above;
2, have a good work record, have more than 2 years (including) experience in the maintenance of kitchen equipment and accessories, and no serious maintenance errors have occurred in the last two years;
3. Ability to organize, coordinate, communicate, execute and plan as a whole. Love the parts maintenance industry, have a good sense of responsibility, and have enough experience in kitchen parts maintenance is preferred;
4. Holders of civil aircraft component repairman (elc) license specified in ccar-66 "Administrative Rules for Civil Aircraft Component Repairman License" are preferred.
Job responsibilities of the seven departments of mechanical processing (1) are involved in making the use plan of construction machinery and equipment, and are responsible for making the maintenance plan.
(2) Participate in formulating the management system of construction machinery and equipment.
(3) Participate in the general layout of construction and the purchase or lease of mechanical equipment.
(4) Participate in the review of the qualification of special equipment installation and disassembly units, emergency rescue plans for safety accidents and special construction plans.
(5) Participate in safety management, supervision and inspection of installation and disassembly of special equipment.
(6) Participate in the inspection, acceptance and safety technical disclosure of construction machinery and equipment, and be responsible for filing and registering the use of special equipment.
(7) Participate in organizing the education, training and qualification certificate inspection of the operators of construction machinery and equipment, and establish the archives of special operators of machinery.
(8) Responsible for supervising and inspecting the use and maintenance of construction machinery and equipment, and checking the safe use of special equipment.
(9) Responsible for implementing safety protection and environmental protection measures for construction machinery and equipment.
(10) Participate in the investigation, analysis and handling of accidents of construction machinery and equipment.
(1 1) Participate in the preparation of construction machinery and equipment quota, and be responsible for the establishment of machinery and equipment account.
(12) is responsible for the statistics, accounting and examination and approval of daily maintenance expenditure of construction machinery and equipment.
(13) Participate in the lease settlement of construction machinery and equipment.
(14) is responsible for compiling safety technical management data of construction machinery and equipment.
(15) is responsible for the collection, collation and handover of mechanical equipment data.
Job responsibilities of Mechanical Processing Department 8 1, responsible for mechanical feasibility demonstration of new product development;
2. Be responsible for the development and design of mechanical parts of products, and participate in the mapping of related products and parts;
3, responsible for the preparation of products required materials, accessories, standard parts list;
4. Cooperate with other subsystem engineers to * * * complete the development of whole machine products and prepare relevant production process documents;
5. Participate in the assembly test of new products and related technical tests;
6. Participate in writing new product research and development reports;
7. Participate in the analysis, discussion and compilation of product mechanical technical standards, prepare relevant technical documents, and assist the product manager to continuously improve the mechanical design of finalized products.
Requirements:
College degree or above in mechanical design, industrial modeling, mechatronics and other related majors;
2.3 years working experience in industrial instrument product design, project management experience is preferred;
3. Skillful operation of SolidWorks, CAD, PRO/E and other design software; Familiar with mechanical transmission, precision machining technology and related technical standards; Familiar with metal, sheet metal, profile and other material characteristics and mechanical parts design and processing technology;
4. Good communication skills, presentation skills and skilled use of office software;
The responsibilities of the mechanical processing department are 9 1, which is responsible for the technical management of the mechanical equipment of the whole company.
2. Be responsible for all technical guidance of the company's machinery and equipment, guide and solve technical problems of machinery and equipment, and ensure the normal utilization rate and intact rate of the company's machinery and equipment.
3, responsible for the examination and approval and implementation of mechanical equipment operation procedures, safety operation procedures, maintenance procedures and various management systems.
4. Review the company's mechanical equipment management account, review the mechanical equipment management work plan, major (item) repair plan, annual maintenance plan and spare parts processing plan, and guide the review of outsourced mechanical equipment and spare parts plans.
5. Be responsible for the overall technical business leadership of the comprehensive group and vascular group in the machine maintenance workshop.
6. Adhere to the principle of "three-no-misses" in equipment accidents, preside over the company's equipment accident analysis meeting, put forward treatment opinions and preventive measures, and organize the inspection and rectification of hidden dangers of accidents.
7. Participate in the economic and technical demonstration of the company's technical transformation planning, production equipment renewal, selection and purchase, and organize the implementation according to the division of responsibilities.
8. Organize to formulate the technical training work plan of the company's mechanical equipment maintenance personnel, and organize the specific implementation to ensure the completion of the training task.
Responsibilities of Mechanical Processing Department 10 (1) R&D technology;
(2) Prepare process planning and design layout scheme;
(3) Process design and preparation of process documents;
(4) process management;
(5) Design, manufacture, assembly, installation and debugging of process equipment;
(6) Research and design methods of measuring geometric dimensions;
(7) Monitor the quality of manufacturing process and analyze the causes of failure;
(8) Non-destructive testing of materials, blanks, parts and equipment, and reliability analysis and evaluation;
(9) Research, development, popularization and application of new processing and testing technologies;
(10) Formulation, popularization and application of processing technology, testing methods and required equipment standards;
(1 1) Technical appraisal, evaluation and arbitration of equipment;
(12) The chemical analysis, mechanical properties test, metallographic structure test and melting quality test of metal materials and blanks were carried out.
;