Street lamp patent

First of all, let's talk about the solar street lamp factory with its own patents, Huangchuan Limin Technology Solar Street Lamp Factory, and its solar controller has its own patents. Moreover, the street lamp I bought installed in his house is better in the same price, both in quality and price. I suggest that you can also go to the factory to customize the solar street lamp products suitable for you according to your situation, which is still a good manufacturer.

Setting method

When the key press time exceeds 3s, the digital tube starts flashing, and the system enters the adjustment mode. Loosen the key. Every time you press the key, the number of the digital tube will become a new number until the number displayed by the digital tube matches the number corresponding to the mode selected by the user from the table. When the nixie tube stops flashing or the key is pressed for more than 3 seconds, the setting is completed.

Pure light control

When there is no sunlight, the light intensity drops to the starting point. After the controller delays 10 minute to confirm the start signal, the load starts according to the set parameters and starts to work. When there is sunshine, the light intensity rises to the starting point, and the controller delays 10 minutes to confirm the turn-off signal, then turns off the output and the load stops working.

Light control+time control

The starting process is the same as pure light control. When the load works for a period of time, it will automatically turn off. The setting time is 1 ~ 14 hours.

Manual control

In this mode, whether it is day or night, the user can control the load on and off by pressing the key. This mode is used for some special load cases or debugging.

Debugging mode

Used for system debugging, the load is turned off when there is light signal, and turned on when there is no light signal, which is convenient for checking the correctness of system installation during installation and debugging.

Normally open mode

The electrified load always keeps the output state. This mode is suitable for loads that need 24-hour power supply.