Brief introduction of pipeline hinge
Pipe hinge, also called spring hinge, is mainly used for the connection of furniture door panels. Generally, the panel thickness is required to be 16 ~ 20mm. Its material is galvanized iron and zinc alloy, and there are adjustment screws, which can adjust the height and thickness of the board up and down. One feature of pipeline hinge is that it can match the opening angle of cabinet door according to space. In addition to the general angle of 90 degrees, there are 127 degrees, 144 degrees, 165 degrees and so on. There are corresponding hinges to match, so that all kinds of cupboard doors have corresponding extensions.
Pipe hinges can be divided into full cover, half cover and no cover, and can also be called straight bend, middle bend and big bend respectively. After closing the door, the cupboard door completely covers the vertical plate, which is equivalent to covering the whole vertical plate; Half cover means that after the door is closed, the cupboard door only covers half of the vertical plate; After the door is closed without cover, the door is embedded in the cabinet and the riser is exposed.
A pipeline hinge structure comprises a hinge cup, a hinge seat and a hinge arm. The hinge cup is generally 35mm in diameter and 1 1.5- 14mm in depth. The hinge seat is generally fixed on the vertical board of the cabinet with four screws, which can adjust the left-right distance error of the installed door panel, and can adjust the up-and-down position, front-back position and left-right position of the door panel respectively.
How to choose pipe hinge
1, look at the appearance, take a few more hinges to see if the appearance of the hinges is roughly one to one. Many hinges produced by bad hinge factories are black here and yellow there, unstable electroplating, thin coating and easy to rust.
2, holding a hinged iron cup, slowly close the hinge like closing the door, remember to be slow. If you think the hinge is smooth, there are no obstacles, and even several attempts are smooth, then the product of this hinge is initially qualified.
3. After installing the door, press it down slightly and see the stress of the hinge. If it is easy to sink, and it is very serious, then be careful that the door panel will be asymmetrical in the future.
4. Test its durability with a professional fatigue tester and its rust resistance with a salt spray tester. This is beyond the reach of ordinary consumers.
What brand of pipe hinge is good?
1, gute hardware
Gutt Hardware Co., Ltd. is a professional manufacturer of handle hardware, raw materials, bathroom, cabinets, stainless steel, classical handles, zinc alloy handles, brackets, corner codes and other products. The company is headquartered in, and Gert Hardware Factory has a complete and scientific quality management system. The integrity, strength and product quality of Gute Hardware Co., Ltd. have been recognized by the industry.
2. Yajie Hardware
Guangdong Yajie Hardware Co., Ltd., founded in 1990, is located in Changhong Ling Industrial Park, da li, Nanhai District, Foshan City, with beautiful scenery and developed economy, covering an area of 200 mu. It mainly produces building locks, bathroom hardware, door hardware and furniture hardware, covering more than 2,000 varieties such as mortise locks, glass locks, smart locks, copper locks, engineering locks, bathroom accessories, door functional hardware, glass hardware, door closers, floor springs, engineering supporting hardware, furniture locks, small handles, slide drawers, hinges and connectors.
The above is how to choose the pipe hinge for you. Although it is not so difficult to buy hinges, you still need the above skills. I hope consumers can choose the pipe hinge that suits them.