★ Installation of the square bar: Place the bottom of the square bar on the base and tighten the screws from above.
★ Install the motor: Insert the connector of the motor on the connector of the square bar, straighten the direction of the motor, and then tighten the screws.
★ Installation of mesh cover, atomizing disc and fan blade: Remove the screws on the motor head, align the rear fan cover with the motor mounting hole, tighten the screws, then install the fan blade on the motor shaft, tighten the fan blade screws with the motor shaft clearance, install a batch of atomizing discs on the front fan cover on the mounting hole, and then fasten the front fan cover on the rear fan cover.
★ Installation of spray fan motor wire Source: The motor power cord (three holes) is inserted into the three hole socket behind the square pole.
★ Installation of water pipe of centrifugal atomizing fan: Insert 8MM water pipe into atomizing disc, quickly connect and install water pipe, so that the motor of atomizing disc can run naturally. Insert the motor plug (four holes) of the spray tray into the corresponding socket, insert the 6MM and 8MM water pipes into the quick connector respectively, and put on the bellows.
★ Installation of water tank: Install four casters on the base, put the water tank on the cart, put a water pump in the water tank and plug in the outlet pipe. The water pump power cord and the water outlet pipe are inserted into the corresponding holes through the water tank holes.
Dongguan Spode spray fan provides installation method.