Oil pressure pulse
It is mainly used for the maintenance and assembly of heavy trucks, cars and construction machinery or the disassembly and assembly of screws with the same specifications.
power take off
It is one of the main components of pneumatic tools, mainly composed of pneumatic motor and power output gear. It relies on high-pressure compressed air to blow the motor blades to make the motor rotor rotate, output rotary motion to the outside, and drive the whole operation form conversion part to move through gears. According to whether the stator and rotor are concentric, pneumatic motors can be divided into concentric motors and eccentric motors; According to the number of air intake, it can be divided into single air intake motor, double air intake motor and multi-air intake motor. No matter what form of pneumatic motor, it relies on compressed air to blow the motor blades to drive the rotor to rotate. When the motor blades rotate at high speed, they always rub against the inner wall of the stator. It is the most common wearing parts in Madanes, so it requires high quality of compressed air, and whether the compressed air contains lubricating oil molecules.
Operation form
It mainly converts the rotary motion output by the motor. In the automobile manufacturing industry, there are many ways of screw connection, most of which are rotary motion, and of course there are linear reciprocating motion. For different types of pneumatic tools, the conversion part of operation form is mainly divided into mechanical clutch and planetary gear set, friction plate clutch and planetary gear set, hydraulic cylinder, torsion bar and hammer block set. The above parts are all important parts based on rotary motion, which determine the torque, rotational speed, tightening accuracy and other important parameters of pneumatic tightening tools. Because of its constant clutch, compression or torque change, its components are easy to be damaged;
Air intake and exhaust channels
Obviously, the air intake and exhaust channel is the relevant channel for compressed air to enter and exit, and it is the energy supply system to ensure the normal movement of the motor;
sports
That is to say, the so-called pneumatic switch is easily damaged because it is in direct contact with the operator and external objects at all times and is made of many engineering plastic products.
energy
Compressed air is mainly formed after air is compressed by an air compressor, and it is pulsating when it is transported to relevant electricity consumption through a compressed air pipeline;
Air filtration
Because compressed air is usually transported through pipes made of seamless steel pipes, corrosion of inner walls, moisture and dust in compressed air will be formed continuously during long-term use. If this compressed air directly enters the pneumatic motor without any treatment, the service life of the motor will be greatly shortened, resulting in insufficient and unstable power output of the whole tool, which is prone to the phenomenon of serial damage of the motor and other components. Therefore, a compressed air filtering and adjusting device must be set between the compressed air transported by the pipeline and the pneumatic tools, and the pneumatic triplex undertakes this task. Pneumatic triple is mainly composed of barometer, filter, oil mist ejector, voltage regulator and other components, in which the filter has a built-in filter element, which should be regularly maintained, cleaned and replaced after a period of use;
Tool accessories
Here, the tool accessories refer to the tools installed in the pneumatic construction and in direct contact with the workpiece, and the pneumatic triplet undertakes this task. Between the compressed air transported by pipeline and pneumatic tools, compressed air filtering and adjusting devices must be installed, including various pneumatic sleeves, connecting rods, adapters, cutter heads, etc.
The above-mentioned parts are interdependent and mutually restrictive, and cannot exist in isolation to achieve operation.