Zippo wheels don't turn.

1, if there is no flint, don't slide hard. The copper piece of flint on it is stuck in the wheel. Generally, 5- 10 pieces are packed in a small box. Unscrew the screw below and take out the spring and replace it with a new one.

2, put on a new flint and sometimes use it several times because it slips.

3, the wheel is broken, just change the liner.

Extended data:

Zhibao lighter

Zippo Lighter1932 was born in America. The 0.027-inch-thick chrome-plated copper cover and the 0.0 18-inch-thick stainless steel lining constitute the solid shell of Zippo lighter, which is welded by the upper cover and the lower cover through hinges.

The liner is made of stainless steel, and consists of windshield, pulleys, rivets, cams, cotton, cotton pads, screws, flint and other parts.

wood tissue

Zippo lighters are divided into chromium plating, pure copper, silver plating, gold plating, matte paint and pure silver from the surface materials:

Chrome plating: the surface of zippo lighter shell is treated and plated with a layer of metal chromium;

Ice surface: soak PVD film in a special solution until it is semi-melted, and then wrap the fuselage tightly to form a bright ice surface;

Replica series: zippo lighter 194 1 version is used, with four-ring hinge, 24096 replica, 194 1 classic replica;

Pure copper: the whole zippo lighter shell is made of pure copper;

Sterling silver: the shell is made of sterling silver with 23 surfaces of sterling silver mirror;

Antique series: the antique silver coating or bronze coating on the surface of the fuselage is polished to give an antique effect, and then a layer of transparent protective paint is coated on the surface. After a period of use, the antique silver surface will become brighter and brighter.

Armor series: the shell is about 1.5 times thicker than the conventional machine, and the bottom is marked with a shield.

Extended information: zippo lighter-Baidu Encyclopedia